{"product_id":"speedybee-f405-v5-ox32-55a-30x30-deluxe-stack","title":"SpeedyBee F405 V5 OX32 55A 30x30  Deluxe Stack","description":"\u003ch1\u003eSpeedyBee F405 V5 Stack Pro Kit (55A)\u003c\/h1\u003e\n\u003cp\u003eLet's be honest, nobody enjoys crouching over a laptop in a damp UK field, praying to the Betaflight gods while your mates are ripping packs. The \u003cstrong\u003eSpeedyBee F405 V5 Stack Pro Kit\u003c\/strong\u003e is your official release from that digital purgatory. This isn't just another \u003cstrong\u003e55A 30x30 flight stack\u003c\/strong\u003e; it's a complete builder's care package. With its workhorse F405 FC, a beefy 55A OX32 ESC, and glorious \u003cstrong\u003ewireless tuning\u003c\/strong\u003e, you can flash firmware and tweak PIDs entirely from your phone. Welcome to the future.\u003c\/p\u003e\n\u003ch3\u003eWhy You Want It\u003c\/h3\u003e\n\u003cp\u003eBecause your time is worth more than the tangled mess of USB cables at the bottom of your flight bag. This Pro bundle is for the pilot who's released the magic smoke one too many times. On top of the legendary SpeedyBee wireless convenience, you get the tools to build it right first time: a soldering practice board to warm up your shaky hands and a smart short-circuit protector to save your new £70 investment from a momentary lapse in judgement. We're basically selling you peace of mind, with a flight stack attached.\u003c\/p\u003e\n\u003ch2\u003eThe 'Pro' Part: What Makes This a Deluxe FPV Flight Stack?\u003c\/h2\u003e\n\u003cp\u003eIt's the stuff that separates a clean build from a fire hazard. SpeedyBee bundled in the essentials that experienced builders already have, and that new pilots desperately need. Think of it as your build-day safety net.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoldering Practice Board:\u003c\/strong\u003e Get your eye in before you touch the flight controller. Cheaper to burn this than your ESC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Expansion Board:\u003c\/strong\u003e Tidy up your BEC and power wiring like a pro. No more rat's nests.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Extension Board:\u003c\/strong\u003e Mount your USB-C port somewhere sensible, not buried under your GoPro mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart Short Circuit Protector:\u003c\/strong\u003e The real MVP. Plugs in before your LiPo and tells you if you've made a terrible mistake, without the fireworks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFC Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMCU:\u003c\/strong\u003e STM32F405 (The reliable engine that just won't quit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMU (Gyro):\u003c\/strong\u003e ICM42688P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Tuning:\u003c\/strong\u003e Yes, the main reason you're here. Full control via the SpeedyBee App.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlackbox:\u003c\/strong\u003e 16MB Onboard (Because you need irrefutable proof you hit that gap)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBEC 5V Output:\u003c\/strong\u003e 9 groups, 1.5A total. Power more LEDs than a Vegas slot machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBEC 9V Output:\u003c\/strong\u003e 2 groups, 3A total. For your power-hungry DJI O3 or Walksnail VTX.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUARTs:\u003c\/strong\u003e 6 sets. Yes, six. You can finally stop playing solder-pad Tetris.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 30.5 x 30.5mm (The one thing everyone agrees on)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.1g (Less than the spare change in your pocket)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eESC Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware:\u003c\/strong\u003e OX32 (The 32-bit open-source future is now)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current:\u003c\/strong\u003e 55A x 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBurst Current:\u003c\/strong\u003e 70A x 4 (For when \"punch out\" is a command, not a suggestion)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTVS Protective Diode:\u003c\/strong\u003e Yes (Absorbs voltage spikes so the magic smoke stays inside)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 3-6S LiPo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 30.5 x 30.5mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19.1g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the Box*\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x SpeedyBee F405 V5 Flight Controller\u003c\/li\u003e\n\u003cli\u003e1x SpeedyBee OX32 55A 4-in-1 ESC\u003c\/li\u003e\n\u003cli\u003e1x Soldering Practice Board\u003c\/li\u003e\n\u003cli\u003e1x Power Expansion Board\u003c\/li\u003e\n\u003cli\u003e1x USB Extension Board\u003c\/li\u003e\n\u003cli\u003e1x Smart Short Circuit Protection Tool\u003c\/li\u003e\n\u003cli\u003e1x 1000µF Solid Capacitor\u003c\/li\u003e\n\u003cli\u003e1x Bag of assorted cables, gummies, and screws you'll probably lose in the carpet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDisclaimer\u003c\/h2\u003e\n\u003cp\u003e*Component colours might change based on what was on sale that week, but the core performance is guaranteed to be excellent.\u003c\/p\u003e\n\u003ch2\u003eStill Here?\u003c\/h2\u003e\n\u003cp\u003eWow, a reader. We're genuinely impressed. You've scrolled past the specs, ignored the buy button, and are now deep in the SEO-padding zone. For your dedication, here's a tip: this bundle is the \u003cstrong\u003ebest FPV builder kit in the UK\u003c\/strong\u003e for anyone graduating from Bind-and-Fly. It teaches good habits. Now, for the love of Bardwell, go click \"Add to Basket\" before your current quad decides to retire itself into a tree.\u003c\/p\u003e\n\u003ch3 class=\"Specifications\" id=\"Parameters\"\u003eFull Specifications\u003c\/h3\u003e\n\u003ctable class=\"speedybee-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"30%\"\u003eProduct Name\u003c\/td\u003e\n\u003ctd width=\"70%\"\u003eSpeedyBee F405 V4 30x30 Flight Controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMCU\u003c\/td\u003e\n\u003ctd\u003eSTM32F405\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIMU(Gyro)\u003c\/td\u003e\n\u003ctd\u003eICM42688P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Port Type\u003c\/td\u003e\n\u003ctd\u003eType-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBarometer\u003c\/td\u003e\n\u003ctd\u003eBuilt-in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOSD Chip\u003c\/td\u003e\n\u003ctd\u003eAT7456E chip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBLE Bluetooth\u003c\/td\u003e\n\u003ctd\u003eSupported. Used for Flight Controller configuration (MSP should be enabled with Baud rate 115200 on UART4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWIFI\u003c\/td\u003e\n\u003ctd\u003eNot supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDJI Air Unit Connection Way\u003c\/td\u003e\n\u003ctd\u003eTwo ways supported: 6-pin connector or direct soldering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6-pin DJI Air Unit Plug\u003c\/td\u003e\n\u003ctd\u003eSupported. Completely compatible with DJI O3\/RunCam Link\/Caddx Vista\/DJI Air Unit V1, no wire is needed to be changed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlackbox MicroSD Card Slot\u003c\/td\u003e\n\u003ctd\u003e*Betaflight firmware requires the type of the microSD card to be either Standard (SDSC) or High capacity (SDHC) under 32GB, so extended capacity cards (SDXC) are not supported (Many high-speed U3 cards are SDXC). Also the microSD card MUST be formatted with the FAT16 or FAT32 (recommended) format. So, you could use any SD card less than 32GB, but the Betaflight can only recognize 4GB maximum. We suggest you use this \u003ca href=\"https:\/\/www.sdcard.org\/downloads\/formatter_4\/\" rel=\"noopener\" target=\"_blank\"\u003e 3rd party formatting tool \u003c\/a\u003e and choose 'Overwrite format' then format your card. Also check out \u003ca href=\"https:\/\/github.com\/cleanflight\/cleanflight\/blob\/master\/docs\/Blackbox.md#openlog-serial-data-logger\" rel=\"noopener\" target=\"_blank\"\u003e here \u003c\/a\u003e for the recommended SD cards or buy the \u003ca href=\"https:\/\/www.speedybee.com\/8gb-class10-high-speed-microsd-card-for-blackbox-logging-tested-by-speedybee\/\" rel=\"noopener\" target=\"_blank\"\u003e tested cards \u003c\/a\u003e from our store.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Sensor Input\u003c\/td\u003e\n\u003ctd\u003eSupported. For SpeedyBee BLS 60A ESC, please set scale = 400 and Offset = 0.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Input\u003c\/td\u003e\n\u003ctd\u003e3S - 6S Lipo(Through G, BAT pins\/pads from the 8-pin connector or 8-pads on the bottom side)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5V Output\u003c\/td\u003e\n\u003ctd\u003e9 groups of 5V output, four +5V pads and 1 BZ+ pad( used for Buzzer) on front side, and 4x LED 5V pads. The total current load is 3A.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9V Output\u003c\/td\u003e\n\u003ctd\u003e2 groups of 9V output, one +9V pad on front side and other included in a connector on bottom side. The total current load is 3A.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3.3V Output\u003c\/td\u003e\n\u003ctd\u003eSupported. Designed for 3.3V-input receivers. Up to 500mA current load.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4.5V Output\u003c\/td\u003e\n\u003ctd\u003eSupported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eESC Signal\u003c\/td\u003e\n\u003ctd\u003eM1 - M4 on bottom side and M5-M8 on front side.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUART\u003c\/td\u003e\n\u003ctd\u003e6 sets(UART1, UART2, UART3, UART4(Dedicated for Bluetooth connection)), UART5 (Dedicated for ESC telemetry),UART6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eESC Telemetry\u003c\/td\u003e\n\u003ctd\u003eUART R5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eI2C\u003c\/td\u003e\n\u003ctd\u003eSupported. SDA \u0026amp; SCL pads on front side. Used for magnetometer, sonar, etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTraditional Betaflight LED Pad\u003c\/td\u003e\n\u003ctd\u003eSupported. 5V, G and LED pads on bottom of the front side. Used for WS2812 LED controlled by Betaflight firmware.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuzzer\u003c\/td\u003e\n\u003ctd\u003eBZ+ and BZ- pad used for 5V Buzzer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBOOT Button\u003c\/td\u003e\n\u003ctd\u003eSupported. \u003cbr\u003e[A]. Press and hold BOOT button and power the FC on at the same time will force the FC to enter DFU mode, this is for firmware flashing when the FC gets bricked. \u003cbr\u003e[B]. When the FC is powered on and in standby mode, the BOOT button can be used to controller the LED strips connected to LED1-LED4 connectors on the bottom side. By default, short-press the BOOT button to cycle the LED displaying mode. Long-press the BOOT button to switch between SpeedyBee-LED mode and BF-LED mode. Under BF-LED mode, all the LED1-LED4 strips will be controlled by Betaflight firmware.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRSSI Input\u003c\/td\u003e\n\u003ctd\u003eSupported. Named as RS on the front side.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmart Port \/ F.Port\u003c\/td\u003e\n\u003ctd\u003eNot supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Flight Controller Firmware\u003c\/td\u003e\n\u003ctd\u003eBetaFlight(Default), INAV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware Target Name\u003c\/td\u003e\n\u003ctd\u003eSPEEDYBEEF405V4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003e30.5 x 30.5mm( 4mm hole diameter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimension\u003c\/td\u003e\n\u003ctd\u003e41.6(L) x 39.4(W) x 7.8(H)mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e10.5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"speedybee-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"30%\"\u003eProduct Name\u003c\/td\u003e\n\u003ctd width=\"70%\"\u003eSpeedyBee BLS 60A 30x30 4-in-1 ESC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eBLHeli_S J-H-50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePC Configurator Download Link\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/esc-configurator.com\/\"\u003e https:\/\/esc-configurator.com\/ \u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Current\u003c\/td\u003e\n\u003ctd\u003e60A * 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBurst Current\u003c\/td\u003e\n\u003ctd\u003e80A(10 sec)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTVS Protective diode\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal Capacitor\u003c\/td\u003e\n\u003ctd\u003e1000uF Low ESR Capacitor(In the package)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eESC Protocol\u003c\/td\u003e\n\u003ctd\u003eDSHOT300\/600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Input\u003c\/td\u003e\n\u003ctd\u003e3-6S LiPo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Output\u003c\/td\u003e\n\u003ctd\u003eVBAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Sensor\u003c\/td\u003e\n\u003ctd\u003eSupport (Scale=400 Offset=0)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eESC Telemetry\u003c\/td\u003e\n\u003ctd\u003eNot supported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003e30.5 x 30.5mm( 4mm hole diameter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimension\u003c\/td\u003e\n\u003ctd\u003e45.6(L) * 44(W) *8mm(H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e23.5g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/f405_v5_24.jpg?v=1758115801\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":53458796544347,"sku":"SB-F4V5-OX32-55-PRO-STACK","price":84.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/3888\/1627\/files\/869_source_1756188759_2beded31-1d11-4396-90da-521048623116.jpg?v=1782583849","url":"https:\/\/trandnova.com\/es\/products\/speedybee-f405-v5-ox32-55a-30x30-deluxe-stack","provider":"Trand Nova","version":"1.0","type":"link"}