Unique Gifts

In a race, microseconds count! Goggles down, thumbs up - are you ready for a true 250Hz radio link? End to end latency: barely noticeable. Nothing else comes close! Thanks to 2.4GHz technology, TBS took the best from Crossfire and shrunk it down to speed it up. The end result: Smaller antennas, more speed, and range for days. The TBS Tracer Nano TX Starter Kit comes with one TBS Tracer Nano TX, three TBS Tracer Nano RX, and six TBS Tracer Immortal T Antennas to give you lower latency and amazing range. INTRODUCING TBS TRACER - 2.4GHZ "CROSSFIRE" RADIO SYSTEM 250Hz: Fastest available radio and telemetry link Brand new 2.4GHz technology not found in any other radio link 3ms end to end latency Crossfire engine for ultimate compatibility and functionality "JR" and "LITE" form factor transmitters Nano-sized receiver with antenna diversity 15mi+/25km+ range For drones, planes, helicopters, cars, and boats THE FASTEST RADIO LINK In a race, microseconds count. Goggles down, thumbs up - are you ready for a two-way 250Hz radio link? End to end latency: basically zero (okay, 3ms!). Range: for days. Nothing comes close! We took the best from Crossfire and shrunk it down & sped it up. NOT JUST FOR RACE AND "FREERANGE" PILOTS A single operation mode satisfies all requirements. A spine-tingling 250Hz refresh rate. Plenty of penetration and range to outperform even the most serious video link. Full telemetry capability is standard, without any range of degradation! Thanks to Crossfire pedigree, drone pilots, traditional R/C pilots and everyone in between can instantly tap into the familiar lineup of compatible software, devices, remotes, and mounting boards. EASE OF USE OTA firmware updates, auto-bind, multi-bind, LUA device configuration such as flight controller PIDs, etc. and cloud connectivity: No problem! These are all features that TBS first brought into the R/C space with TBS Crossfire! All receivers arrive in binding mode and it remembers your bind across all of your radios, so the bind button is technically not needed ever. UNDER THE HOOD TBS Tracer runs on the Crossfire engine. Over 6 years of active development and by far the most popular R/C system for FPV enthusiasts! You instantly tap into the same reliability, features, and compatibility that drone pilots see as synonymous with peace of mind. So what's the difference? Higher update rate, lower latency, smaller antennas due to a higher frequency. Crossfire users will feel right at home! THE TBS GUARANTEE In over 10 years of TBS existence, software updates have always been free, continuous, and plenty. Hardware is built for longevity and comes packed with a great range of features that are yet to be unlocked. Support has always been laser-focused on customer satisfaction. For pilots, by pilots. It is the reason why TBS products have the largest following, and why investment into TBS Tracer will continue to pay dividends in the future - just like TBS Crossfire continues to do for all hobbyists. Features Long-range, adaptive and robust remote control system for your drone & aircraft Low latency, 250Hz update rate (5x faster than typical - world's fastest) for mind-blowing accuracy The two-way communication link with real-time link vitals and telemetry OTA firmware updates, auto-bind, multi-bind support TBS Cloud connectivity with telemetry output for smartphone apps Fully configurable by OpenTX and TBS TANGO remote using CRSF protocol "Unlimited" amount of people can fly at the same time Selectable RF power from 25mW to 1W (local restrictions apply) 8 or 12ch output via CRSF, SBUS, inverted SBUS, or PPM Serial Modem capable of transmitting MAVLink or other serial protocols (up & downlink) Specifications TBS TRACER NANO TX Latency & Refresh Rate: 3ms, 250Hz Output power: 25mW / 100mW Frequency Bands: 2.4GHz ISM Input Voltage: 3.5 - 13V Connector: USB-C Power consumption: 1.1W (@10mW) - 2W (@100mW) Dimensions: 65 x 48 x 22 mm (JR module size) Radio Compatibility: LITE module bay (e.g. TBS Tango 2, Taranis X-Lite, X9 Lite), OpenTX V2.1+. The TBS Tracer Nano TX is suggested for use in Futaba and Spektrum remotes that do not have a JR-module bay. * output power modes may not be available due to local regulation limitations TBS TRACER NANO RX Antnna ports: 2x u.FL / IPEX (diversity) Package contents: 1x TBS Tracer Nano RX, 2x Immortal-T, silicone cables Protocols: 2x CRSF, SBUS, PPM, 6x PWM, SmartAudio 2.0 / 2.1 (VTx Control) Weight: 0.5g (receiver only) Size: 11mm x 18mm Includes 1 x TBS Tracer Nano TX 3 x TBS Tracer Nano RX 6 x TBS Tracer Immortal T Antenna Downloads TBS Tracer Manual TBS Agent X (for software updates) Latest OpenTX LUA Scripts for Crossfire TBS Cloud - Wifi Firmware OpenTX Nightly Firmware

Read more less

SkyRC D260 is a dual channel AC/DC charger, which features an intuitive interface, and its button design makes it incredibly easy to operate. With two independent circuits and the ability to charge batteries up to 6S at maximum 14A per channel, D260 is a smart choice for RC hobbyists. Key Features Two separate charging channels with max. 130W per channel (total 260W) User-friendly and simple menu navigation Micro USB socket for firmware upgrade Loading, unloading and storage cargo Display of single cell voltage, total voltage, capacity, operating temperature, charging time and much more. Many different charging programs, including a special one to be able to store batteries perfectly longer. Suitable for various battery types (LiPo, LiFe, LiIon, LiHV, NiCd, NiMH, PB). Profile memory for 10 loading or unloading data each. Specification Input voltage DC: 11-18V Input voltage AC: 100-240V Max. Charging power: 2x 130W Max. Discharge power: 2x 10W Charging current: 2x 0.1-14.0A Discharge current: 2x 0.1-2.0A Max. Balancer compensation current: 500mA / cell Power supply output voltage: 5-25V / 2x 130W Cell number (LiPo / LiIon / LiFe / LiHV): 1-6 cells Number of cells (NiMH / NiCd): 1-15 cells Pb battery voltage: 2-20V Weight: 896g Dimensions: 160x150x71mm MPN: SK-100157 Included 1x SKYRC D260 charger 2x charging cable 1x power cable 1x user manual Please Note – Power Cable Depending on stock availability, this charger may be supplied with either a UK plug or an EU plug cable, as we are unable to always guarantee which plug type our manufacturer ships with. If you require a UK plug cable, you can order one separately below: 13A IEC 60320 C7 (Figure-8 / Shotgun) Connector – UK Plug 13A Cloverleaf Connector Plug – UK Plug

Read more less

Featuring front-accessible tension and travel adjustment for easy fine-tuning. The AG01 will take your TX16s to the next level. The AG01 gimbals have been in development with our engineers and champion pro pilots such as MCK, Alex Campbell, Noical, Veysi.FPV, AZFPV, Xiao Zheng, and Long XL meet the demanding requirements of the world's most competitive racing events. Features Designed specifically for the RadioMaster TX16S Radio Mode Switching Throttle Tension Adjustment CNC Aviation-Grade Aluminum Spring Tension Adjustment Non-Contact Hall Sensors Quad Precision Bearings Stick Travel Adjustment Ergonomic Stick Ends Adjustable Exterior Specifications Adjustable travel range: 38°- 54° Temperature range: -20°c-85°c Linearity: Real-time (No delay) Working voltage: DC 3.3V Adjustable tension: Yes Adjustable mode: Yes Product model: AG01 Size: 60*53*56mm Quad bearing: Yes Sensing type: Hall Weight: 82g Includes 1x Radiomaster TX16S CNC Hall Gimbal - Self-Centering 1x Radiomaster TX16S CNC Hall Gimbal - Throttle 2x Lubricating Oil 2x Damping Oil

Read more less

With a design based off of the Marmotte frame , the Badger updates it with removable arms: carefully designed to ensure a rock-solid construction. The Cage This is the newest revision of Armattan's titanium cage; the same as on the Marmotte. And just in case you haven't heard what the perks of this cage are compared to any other, we'll run through them quickly here. - Independent HD camera tilt means there's no need to deal with foam wedges for the front or back of your recording camera. - A wide range of FPV cam tilt options. From 10 degrees to way too much. - 1mm FPV-cam savers: these are designed to bend so your camera won't break. - A minimized weight due to a state of the art, 6-axis milling process. And the best part? All of these perks come on top of the firm mount and incredible protection that you've come to expect from an Armattan product. The Arms Since having removable arms is the major draw for this release, we wanted to specifically mention how they work. The arms mount up with two bolts and two sunk-nuts each. The sunk-nuts go straight into the 4mm baseplate, so there's no need to worry about delamination. When installed, the arms meet in the center of the baseplate, further locking down the construction. We're providing you with a remarkably solid, precise product, and we know that you will have full confidence in this frame. Specifications Frame Weight approx. 130 grams Motor to Motor 236mm Frame Shape Compressed X Main Plate Thickness 4mm Arm Thickness 4mm Hardware Steel Bolts Titanium Cage Aluminum Standoffs Motor Mount Pattern 22xx FC Stack Mount 20mm and 30.5mm compatible FPV Camera Mount Mini-camera (21mm) FPV Antenna Mounts TBS, SMA and U.FL compatible Max Stack Height 20mm Warrantied Parts All Recommended Components Motor Size 2306 ESCs 30a Prop Size Up to 5.5"\n \n \n \n \n \n LiPo\n \n \n \n 4-5S/1500mAh\n \n \n \n \n \n \n \n \n Other Details\n \n \n \n This frame comes with tons of other bells and whistles. As you've come to expect, an extended-aluminum rear provides a protected mount for your VTX antenna no matter whether you use a TBS, SMA, or U.FL style connector. The frame maintains compatibility with 5.5 inch props for those of you who like to ride the line, and the long body means you can more easily fit an HD camera and a bigger lipo, even with high cam tilt. The FC can mount up on either the 30.5mm or 20mm options, and there are even 20mm rear provisions as well for a VTX or any other board.\n \n \n Add the differences in carbon and the extra hardware, and you're probably expecting this frame to be considerably heavier than the fixed arm version (the Marmotte). Well due to our experience in design and some clever optimization, we've kept the difference down to 15g. You can thank us later.\n \n \n \n The Warranty\n \n \n \n I almost can't believe we're still having this conversation, but keep in mind that we'll never stop reassuring you. Full warranty protection. Cage. Carbon. Everything.\n \n \n \n Included\n \n \n \n \n Titanium:\n \n \n 2x Camera-cage brackets\n \n 2x Camera-cage anchors\n \n \n \n Hardware:\n \n \n 10x 4mm M3 iron bolts\n \n 14x 6mm M3 12.9 grade steel bolts\n \n 8x 8mm M3 12.9 grade steel bolts\n \n 10x 10mm M3 12.9 grade steel bolts\n \n 12x Sunknuts\n \n 4x 16mm M3 iron bolts\n \n 6x 2.5mm M2 cuphead iron bolts\n \n \n \n Aluminum:\n \n \n 1x 23mm front standoff\n \n 2x tail posts\n \n 2x camera savers\n \n \n \n Nylon:\n \n \n 4x 6mm M3 standoffs\n \n 4x nuts\n \n 2x M6 nylon washers\n \n \n \n Carbon Fiber:\n \n \n 1x 2mm Top (LiPo) plate\n \n 1x 1.5mm HD Cam plate\n \n 1x 4mm Main plate\n \n 2x Antenna mount plates (TBS and SMA)\n \n \n \n Other:\n \n \n 1x Lipo strap\n \n 1x LiPo foam pad\n \n 1x HD camera foam pad\n \n 4x Dog-bone landing pads\n \n 1x Antenna mount\n \n 1x SMA grommet\n \n 1x Diamond-coated steel file\n \n 1x Build instructions\n \n \n\n

Read more less

For those who find joy in testing the limits of rugged terrains, the FTX Mauler 2.0 Rock Crawler RTR is your ultimate off-road companion. Designed with an authentic frame chassis and packed with high-performance features, this crawler is ready to tackle the most demanding trails. Inspired by full-scale buggies, the Mauler 2.0 boasts a realistic two-seat interior, complemented by a durable moulded nylon roll cage. This crawler isn't just about looks; it's about performance. Under the hood, you'll find the upgraded System 3 waterproof ESC/RX/LED smart controller and the Etronix 4-channel radio system, offering precision control and numerous lighting options to keep you on track, even in the dark. For those who find joy in testing the limits of rugged terrains, the FTX Mauler 2.0 Rock Crawler RTR is your ultimate off-road companion. Designed with an authentic frame chassis and packed with high-performance features, this crawler is ready to tackle the most demanding trails. Inspired by full-scale buggies, the Mauler 2.0 boasts a realistic two-seat interior, complemented by a durable moulded nylon roll cage. This crawler isn't just about looks; it's about performance. Under the hood, you'll find the upgraded System 3 waterproof ESC/RX/LED smart controller and the Etronix 4-channel radio system, offering precision control and numerous lighting options to keep you on track, even in the dark. Specification Length: 480mm Width: 280mm Height: 210mm Weight: 2800g Wheelbase: 350mm Gear Ratio: 1:48 Tyre Diameter: 140mm Please Note: This model is sold in RTR (Ready-to-run) format but requires 4xAA batteries for completion.

Read more less

TrueRC X-RAY 5.8GHz Antenna: The Real 'X-Factor' in Your Drone Game! Prepare for a seismic shift in your drone flight experience with our brand new TrueRC X-RAY 5.8GHz Antenna! It's not just an antenna; it's a technological marvel, a masterpiece of engineering designed to maximize your FPV fun and flexibility. Don't just fly, soar with the X-RAY! Product Highlights: Very low side lobes for noiseless signal reception Stellar front to back ratio for unparalleled efficiency Wider bandwidth with top-notch axial ratio Available in both RHCP and LHCP polarisations Compact and light with a neat 151mm diameter, 20mm thickness, and weight that's a secret till you unbox it (wink) An 'X-plosive' Performance Boost This isn't your grandma's antenna. This is the physical embodiment of TrueRC's design philosophy, delivering up to 18dBic gain over a single element. The X-RAY 5.8 is an evolutionary leap from our celebrated X-AIR technology, now in a neat, clean, and ultra-thin single-feed panel format. Are you ready to meet the future? Side Lobe? More Like Sly Lobe Say 'au revoir' to pesky interference with our ultra-low side lobes. The X-RAY's main lobe efficiency is a cut above the rest, leaving you with a clean signal that even Marie Kondo would approve. Connect with Confidence Our SMA connector ensures solid and secure connectivity, so your connection is more rock and less roll. Enjoy full control of your drone without the fear of signal drop. Beam with Pride With a beam-width* of 60 degrees and -3dB** beam-width of 24 degrees, you'll get coverage that's akin to being at the controls of the Starship Enterprise. Remember, we at Unmanned Tech believe in making your IoT and drone hobby not just a pastime, but a passion. So, boost your FPV game to the stratosphere with the TrueRC X-RAY 5.8GHz Antenna - the only true way to navigate the skies! *Coverage where reception is at least equivalent to an omni. **Coverage where at least 70% of the max range is obtained. Specifications Frequency: 5.4-6GHz ‘ Gain: 17-18 dBic Polarization: RHCP or LHCP Beam-width*: 60deg Beam-width @-3dB**: 24deg. Connector: SMA Dimensions: 151mm dia. x 20mm Weight: 82g Included 1x TrueRC X-RAY 5.8GHz Antenna Tags: TrueRC X-RAY 5.8GHz Antenna, FPV antenna, Drone antenna, high gain antenna, LHCP, RHCP, low side lobes, excellent efficiency, wide bandwidth antenna, 5.8GHz antenna

Read more less

This is a single Reach M2 module that gives you centimetre accuracy RTK or PPK mapping operations. The Reach M2 gives you some advantages over the previous generation Reach M+. To start you now get a multi-band receiver, that can give you baseline of up to 100 km in PPK. (M+ could only to 20km). Other improvements include more rnage in RTK (60km) and a faster time to fix (around 5 seconds). This system is designed to be used with the Reach RS2 base station for best results. Included: Reach M2 Micro-USB cable JST-GH 6-pin to jumper pin cable JST-GH 5-pin to jumper pin cable PPK mapping with centimeter accuracy. Use fewer GCPs https://old.unmannedtechshop.co.uk/wp-content/uploads/2020/03/camera_logs_1.mp4 Why camera synchronization is so important Usually autopilot triggers the camera and records the coordinate it has at that moment. When the drone is flying at 20 m/s and GPS works at 10 Hz, that means your autopilot will have position readings only each 4 m, which is not suitable for precise georeferencing. In addition, there is always a delay between the trigger and the actual moment the photo is taken. Reach eliminates the delay Reach solves the problem of positioning by connecting directly to the camera hot shoe port, which is synced with the shutter. The time and coordinates of each photo are logged with a resolution of less than a microsecond. This method allows GCPs to be used only to check your accuracy. 1. Connect Reach to a hot shoe port on a camera Every time a photo is taken camera produces a pulse on a flash hot-shoe connector which is synced to a shutter opening. 2. Fly a drone, Reach will record photo events Reach captures flash sync pulses with sub-microsecond resolution and stores them in a raw data RINEX log in the internal memory. 3. Download logs from Reach and base station After the flight, get the RINEX logs from your airborne Reach module and a base station (Reach RS, CORS or another receiver). 4. Process logs and get a file with geotags of photos Process RINEX files using free RTKLIB software. The produced file with precise coordinates of the photos can be used for georeferencing. NTRIP or another Reach as a base station To calculate centimeter-precise coordinates in PPK and RTK, Reach needs corrections from a base station. It could be either another Reach receiver or an NTRIP service. VRS is also supported. Compatibility Reach M2 works seamlessly with other Reach receivers over any link and are compatible with any other receiver that supports RTCM3 and NTRIP. Reach M2 and Reach RS2 Provides robust performance and quick initialization. Allows working on long baselines. Reach RS2+/ M2 UAV Mapping Kit £ 2,679.00 (ex VAT: £ 2,232.50 ) Add to basket RTK Up to 60 km PPK Up to 100 km Time to fix 5 sec Frequency bands Multi-band RINEX logging update rate Up to 20 Hz Comes with an app ReachView is the most user-friendly software for data collection that is available both for Andr oid and iOS. With ReachView, you can control all the features of Reach receivers, such as setting up a base station, logging RINEX data, configuring NMEA output, and monitoring data. Camera control Reach is able to trigger cameras as well as register events. The event mark feature is a must for aerial mapping as it allows the precise time when the shutter was activated to be registered. Simple log management Logs are automatically recorded directly to RINEX in the internal memory. View a list of the logs and download them using the ReachView app. Monitoring data ReachView shows current satellite levels, your location on a map, and much more Specifications Reach M2 Mechanical Dimensions 15.4 x 45.3 x 14.6 mm Weight 20 g Operating tº -20…+65 ºC Electrical Input voltage on USB and JST-GH 4.75 - 5.5 V Antenna DC bias 3.3 V Av. consumption @5V 200 mA Positioning Static horizontal 4 mm + 0.5 ppm Static vertical 8 mm + 1 ppm Kinematic horizontal 7 mm + 1 ppm Kinematic vertical 14 mm + 1 ppm Connectivity LoRa radio (sold separately) Frequency range 868/915 MHz Distance Up to 8 km Wi-Fi 802.11b/g/n Bluetooth 4.0/2.1 EDR Ports USB, UART, Event Data Corrections NTRIP, RTCM3 Position output NMEA, LLH/XYZ Data logging RINEX with events with update rate up to 20 Hz Internal storage 16 GB GNSS Signal tracked GPS/QZSS L1C/A, L2CGLONASS L1OF, L2OFBeiDou B1I, B2I Galileo E1-B/C, E5b Number of channels 184 Update rates 10 Hz GNSS IMU 9DOF Resources: Check out all the information you need on this product here .

Read more less

This is a single Reach M2 module that gives you centimetre accuracy RTK or PPK mapping operations. The Reach M2 gives you some advantages over the previous generation Reach M+. To start you now get a multi-band receiver, that can give you baseline of up to 100 km in PPK. (M+ could only to 20km). Other improvements include more rnage in RTK (60km) and a faster time to fix (around 5 seconds). This system is designed to be used with the Reach RS2 base station for best results. Included: Reach M2 Micro-USB cable Multi-band GNSS antenna Reach M+/M2 SMA antenna adapter cable 0.5m JST-GH 6-pin to jumper pin cable JST-GH 5-pin to jumper pin cable PPK mapping with centimeter accuracy. Use fewer GCPs https://old.unmannedtechshop.co.uk/wp-content/uploads/2020/03/camera_logs_1.mp4 Why camera synchronization is so important Usually autopilot triggers the camera and records the coordinate it has at that moment. When the drone is flying at 20 m/s and GPS works at 10 Hz, that means your autopilot will have position readings only each 4 m, which is not suitable for precise georeferencing. In addition, there is always a delay between the trigger and the actual moment the photo is taken. Reach eliminates the delay Reach solves the problem of positioning by connecting directly to the camera hot shoe port, which is synced with the shutter. The time and coordinates of each photo are logged with a resolution of less than a microsecond. This method allows GCPs to be used only to check your accuracy. 1. Connect Reach to a hot shoe port on a camera Every time a photo is taken camera produces a pulse on a flash hot-shoe connector which is synced to a shutter opening. 2. Fly a drone, Reach will record photo events Reach captures flash sync pulses with sub-microsecond resolution and stores them in a raw data RINEX log in the internal memory. 3. Download logs from Reach and base station After the flight, get the RINEX logs from your airborne Reach module and a base station (Reach RS, CORS or another receiver). 4. Process logs and get a file with geotags of photos Process RINEX files using free RTKLIB software. The produced file with precise coordinates of the photos can be used for georeferencing. NTRIP or another Reach as a base station To calculate centimeter-precise coordinates in PPK and RTK, Reach needs corrections from a base station. It could be either another Reach receiver or an NTRIP service. VRS is also supported. Compatibility Reach M2 works seamlessly with other Reach receivers over any link and are compatible with any other receiver that supports RTCM3 and NTRIP. Reach M2 and Reach RS2 Provides robust performance and quick initialization. Allows working on long baselines. Reach RS2+/ M2 UAV Mapping Kit £ 2,679.00 (ex VAT: £ 2,232.50 ) Add to basket RTK Up to 60 km PPK Up to 100 km Time to fix 5 sec Frequency bands Multi-band RINEX logging update rate Up to 20 Hz Comes with an app ReachView is the most user-friendly software for data collection that is available both for Andr oid and iOS. With ReachView, you can control all the features of Reach receivers, such as setting up a base station, logging RINEX data, configuring NMEA output, and monitoring data. Camera control Reach is able to trigger cameras as well as register events. The event mark feature is a must for aerial mapping as it allows the precise time when the shutter was activated to be registered. Simple log management Logs are automatically recorded directly to RINEX in the internal memory. View a list of the logs and download them using the ReachView app. Monitoring data ReachView shows current satellite levels, your location on a map, and much more Specifications Mechanical Dimensions56.4 x 45.3 x 14.6 mm Weight20 g Operating tº-20…+65 ºC Electrical Input voltage on USB and JST GH4.75 - 5.5 V Antenna DC bias3.3 V Avg. consumption @5V200 mA Positioning Static horizontal4 mm + 0.5 ppm Static vertical8 mm + 1 ppm Kinematic horizontal7 mm + 1 ppm Kinematic vertical14 mm + 1 ppm Connectivity LoRa radio (sold separately) Frequency range868/915 MHz DistanceUp to 8 km Wi-Fi802.11b/g/n Bluetooth4.0/2.1 EDR PortsUSB, UART, Event Data CorrectionsNTRIP, RTCM3 Position outputNMEA, LLH/XYZ Data loggingRINEX with events with update rate up to 20 Hz Internal storage16 GB GNSS Signal trackedGPS/QZSS L1C/A, L2C GLONASS L1OF, L2OF BeiDou B1I, B2I Galileo E1-B/C, E5b Number of channels184 Update rates20 Hz GPS / 5 Hz GNSS IMU9DOF Resources: Check out all the information you need on this product here .

Read more less

Introducing the Sub250 Nanofly20, the ultimate 2-inch mini FPV drone. With its compact 88 mm wheelbase, this drone is perfect for flying indoors and performing freestyle stunts. The powerful 1002 21000kv motor ensures a smooth and responsive flight experience, while the lightweight and highly integrated FC board allows for agile maneuvering. The carbon fiber bottom plate adds strength and durability to the frame, making it capable of withstanding the rigors of intense flying. This version of the Nanofly20 comes equipped with a Walksnail VTX, allowing you to capture high-quality video footage of your flights. At a weight of less than 250g, this drone is exempt from registration requirements and its small flying noise ensures a quiet and peaceful flying experience. Whether you're a beginner or an experienced flyer, the Sub250 Nanofly20 is the perfect choice for freestyle fun in small spaces. With its compact size and powerful motor, the Sub250 Nanofly20 is the new standard for micro FPV drones. Try it today and experience the fun of freestyle flying. Features 1. Weight of the drone is less than 250g, you can take it off without registration. 2. The 1002 21000kv motor has plenty of power, and the 1s battery can also have an excellent flying feel! 3. Ultra-highly integrated flight control board, lightweight design 4. The carbon fiber bottom plate design enhances the overall strength of the rack. 5. Small flying noise, quiet flight. 6. A new choice for freestyle in small indoor spaces. 7. High selectivity of Video transmission, compatible with mainstream high-definition Video transmission( Avatar/HDZero). Specifications Brand Name: Sub250 Version: Walksnail Avatar 1S Mini Product name: Nanofly20 Frame： NF20 Wheelbase size: 88mm Weight：42.8g Arm thickness: 1.5mm Flight Controller： Redfox A1 F4 5A 4in1 AIO FC MCU: STMF411 IMU： ICM42688-P OSD：BetaFlight OSD w/AT7456E chip ESC: Bluejay O-H-5 96K VTX: Walksnail Avatar mini 1S VTX Camera: Walksanil nano Propeller: HQprop 51mm*3 Antenna: Copper tube antenna Motor: Sub250 1002 21000kv Receiver Version: ELRS (SPI) Battery: Recommend 530mAh 1S 90C LiHV battery (Not include) Included 1 x Nanofly20 Walksnail Avatar 1S Mini Quad 4 x HQ 51MM-3 propellers

Read more less

Introducing the Sub250 Nanofly20, the latest 2-inch drone that packs a punch in a small package. This mini FPV drone has a wheelbase of 88 mm, making it perfect for indoor flight and freestyle fun. The Nanofly20 comes equipped with a 1002 21000kv motor, providing plenty of power and a smooth flying experience. The highly integrated FC board allows for a lightweight design, while the carbon fiber bottom plate adds strength to the frame. This version of the Nanofly20 is equipped with an HDZero VTX. With a weight of less than 250g, this drone can be flown without registration, and its small flying noise allows for a quiet flight experience. The Sub250 Nanofly20 is the perfect choice for freestyle in small indoor spaces. With its compact size and powerful motor, the Sub250 Nanofly20 is the new standard for micro FPV drones. Try it today and experience the fun of freestyle flying. Features 1. Weight of the drone is less than 250g, you can take it off without registration. 2. The 1002 21000kv motor has plenty of power, and the 1s battery can also have an excellent flying feel! 3. Ultra-highly integrated flight control board, lightweight design 4. The carbon fiber bottom plate design enhances the overall strength of the rack. 5. Small flying noise, quiet flight. 6. A new choice for freestyle in small indoor spaces. 7. High selectivity of Video transmission, compatible with mainstream high-definition Video transmission( Avatar/HDZero). Specifications Brand Name: Sub250 Version: HDZero Version Product name: Nanofly20 Frame： NF20 Wheelbase size:88mm Weight：39.3g （ Elrs） Arm thickness: 1.5mm Flight Controller：Redfox A1 F4 5A 4in1 AIO FC MCU: STMF411 IMU： ICM42688-P OSD：BetaFlight OSD w/AT7456E chip ESC: Bluejay O-H-5 96K VTX: Hd zero whoop lite Camera: HDZero nano lite camera Propeller: HQprop 51mm*3 Antenna: Copper tube antenna Motor: Sub250 1002 21000kv Receiver Version: ELRS (SPI)/ TBS Nano RX Battery Connector: GNB27 Battery: Recommend 530mAh 1S 90C LiHV battery (Not include) Included 1 x Nanofly20 HDZero Quadcopter 4 x HQ 51MM-3 propellers

Read more less

Features Integrated modular design with high stability and expandability Powered by Raspberry Pi Computer Module 4 with 4GB RAM & 32GB eMMC 5-Inch IPS capacitive multi-touch screen at 1280 x 720 and 293 PPI Wireless connectivity with dual-band 2.4GHz/5GHz Wi-Fi and Bluetooth 5.0 BLE High-speed expansion interface and rich I/O for more expandability Cryptographic co-processor with secure hardware-based key storage Built-in modules such as accelerometer, light sensor, and RTC Gigabit Ethernet Port and Dual USB 2.0 Type-A ports 40-Pin Raspberry Pi compatible header for IoT applications reTerminal is Microsoft Azure Certified Remote management support from partner Mender.io (OTA software updates, configure, troubleshoot, remote terminal access) Meet reTerminal, The Next Generation of Human Machine Interface with you, and also a new member of our reThings family. This future-ready Human-Machine Interface (HMI) device can easily and efficiently work with IoT and cloud systems to unlock endless scenarios at the edge. &feature=emb_title reTerminal CM4104032 is powered by a Raspberry Pi Compute Module 4 (CM4) which is a Quad-Core Cortex-A72 CPU running at 1.5GHz and a 5-inch IPS capacitive multi-touch screen with a resolution of 720 x 1280. It has sufficient amount of RAM (4GB) to perform multitasking and also has sufficient amount of eMMC storage (32GB) to install an operating system, enabling fast boot-up times and a smooth overall experience. It has wireless connectivity with dual-band 2.4GHz/5GHz Wi-Fi and Bluetooth 5.0 BLE. reTerminal CM4104032 consists of a high-speed expansion interface and rich I/O for more expandability. This device has security features such as a cryptographic co-processor with secure hardware-based key storage. It also has built-in modules such as an accelerometer, light sensor, and an RTC (Real-Time Clock). reTerminal CM4104032 has a Gigabit Ethernet Port for faster network connections and also has dual USB 2.0 Type-A ports. The 40-pin Raspberry Pi compatible header on the reTerminal opens it for a wide range of IoT applications. reTerminal CM4104032 is shipped with Raspberry Pi OS out-of-the-box. So, all you have to do is connect it to power and start building your IoT, HMI, and Edge AI applications right away! Also, reTerminal is Microsoft Azure Certified! You can also enable remote management support: Follow our wiki to setup Mender Client on a reTerminal to access OTA updates from a Hosted or Self-Hosted Mender Server to enable remote management capabilities. There are limitless possibilities with the reTerminal. It can be placed at the heart of an IoT/Edge system where you could connect a number of sensors to the reTerminal via different wireless protocols such as LoRa, Zigbee, Wi-Fi, Bluetooth, Sub-1G, and the reTerminal connected to the cloud via Ethernet, Wi-Fi, 5G/ 4G or connected to an edge server to store and process the data. On the other hand, it has a modular design where you can expand this system by connecting different modules to the reTerminal via the 40-Pin GPIO connectors and enable even more applications. You can easily plug modules such as mic array & speaker, camera, industrial I/O, LoRaWAN, 5G/4G, and PoE to realize your ideas! It will be supported by an active community as well! reTerminal is packed with rich interfaces on the side of the device while keeping the design to a minimum. It has a USB Type-C port for power input, a Gigabit Ethernet port for faster and reliable network access, a micro-HDMI interface that supports video output at 4K resolution with a frame rate of 60fps, and also has 2 USB Type-A ports. Furthermore, it also has a high-speed expansion interface with a PCIe 1-lane Host, Gen 2 (5Gbps), USB 2.0 port, 28 GPIOs, and PoE. You can use this interface for industrial and more advanced scenarios! reTerminal also features a 5-Inch IPS capacitive multi-touch screen with a resolution of 1280 x 720 and a pixel density of 293 PPI, providing high definition and rich colors. This resolution is 1.6 times higher than the most common resolution for 5-inch displays, which is 800 x 480. Also, comparing to TN displays, the IPS display on the reTerminal offers better viewing angles as well! reTerminal has security features such as a cryptographic co-processor with secure hardware-based key storage. It also has protected storage for up to 16 keys, certificates, or data. It provides hardware support for symmetric sign, verify, key agreement - ECDSA. It has hardware support for symmetric algorithms, networking key management and secure boot. Specifications Specification Details Platform Processor Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) Frequency 64-bit SoC @ 1.5GHz Memory Capacity 4GB Technology LPDDR4 with on-die ECC eMMC Capacity 32GB Wireless Wi-Fi 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac Bluetooth Bluetooth 5.0, BLE Display LCD 5-inch 720x1280 LCD Touch Panel Capacitive touch panel (support multi-touch) Video HDMI 1 x Micro HDMI output (up to 4Kp60 supported) CSI 1 x 2-lane MIPI CSI camera interface Multimedia H.265 (4Kp60 decode) H.264 (1080p60 decode,1080p30 encode) OpenGL ES 3.0 graphics Built-In Modules Real-Time Clock NXP Semiconductors PCF8563T Low backup current; typical 0.25μA at VDD = 3.0 V and Temperature = 25 ℃ Accelerometer STMicroelectronics LIS3DHTR 16-bit, ±2g/±4g/±8g/±16g dynamically selectable full scale Encryption Microchip ATECC608A Secure Hardware-Based Key Storage, Asymmetric Sign, Verify, Key Agreement Light Sensor Levelek LTR-303ALS-01 Digital light sensor Internal IO Expansion Microchip MCP23008-E Buzzer ≥85dB @10cm 2700±300Hz External I/O GPIOs Up to 5 × UART Up to 5 × I2C Up to 5 × SPI 1 × SDIO interface 1 × DPI (Parallel RGB Display) 1 × PCM 1 × PWM channel Up to 3× GPCLK outputs Vertical expansion interface 1 × PCIe 1-lane Host, Gen 2 (5Gbps) 1 × USB 2.0 port (highspeed) 26 x GPIOs POE Power Voltage 5V DC Current 3A(Minimum) Temperature Operating Temperature 0 - 70°C( For the LCD Screen: 0 - 60°C) Mechanical Dimensions 140mm x 95mm x 21mm Weight 285g Certification Certificates CE, FCC, TELEC(211-210815)

Read more less

The SparkFun MicroMod Asset Tracker Carrier Board provides you with a toolkit to monitor and track the location of your assets. Built around the u-blox SARA-R510M8S module, the asset tracker offers Secure Cloud LTE-M and NB-IoT data communication for multi-regional use and has an integrated u-blox M8 GNSS receiver for accurate positioning information. The SARA-R5 supports many different forms of data communication from full TCP/IP sockets and packet switched data, through HTTP Get/Put/Post, FTP (the SARA has a built-in file system), Ping, to good old SMS text messaging! The Asset Tracker Carrier Board has an integrated ICM-20948 Inertial Measurement Unit (IMU) for Nine Degree-Of-Freedom orientation and movement detection. Want to send a message if your asset is moved? The Asset Tracker can do that! The board also has a built-in digital microphone and so can send an alert as soon as a noise is detected too. The SparkFun Asset Tracker Carrier Board has a built-in micro-SD card socket for data logging as well as a SIM card port and included SIM card . Power options include both USB-C and LiPo battery (with built-in charging and battery fuel gauge), but you can provide power via a breakout pin too. We've provided a full set of examples to get you up and running quickly and our SARA-R5 Arduino Library does all of the heavy lifting for you. The Asset Tracker will work with any of our MicroMod Processor Boards, but because it offers so many features and can be configured in different ways, some Processor Boards may be a better choice for your application than others. Please see our Hookup Guide for further details. &feature=emb_title Features u-blox SARA-R510M8S module providing Secure Cloud LTE-M and NB-IoT data communication for multi-regional use Please check that your service provider offers LTE-M / NB-IoT coverage for your area before purchasing 1x MicroMod Update Tool included to communicate directly with the u-blox SARA-R510M8S module using u-blox's sophisticated m-center Integrated u-blox M8 GNSS receiver for accurate positioning information Nano SIM socket ICM-20948 Inertial Measurement Unit for 9-Degree Of Freedom orientation and movement detection "Wake On Motion" is supported The IMU is located in the center of the board for easy frame-of-reference Digital microphone (SPH0641) for noise detection micro-SD socket for data logging Can be powered by one of our rechargeable LiPo batteries Includes both a LiPo battery charger (MCP73831) and a battery fuel gauge (MAX17048) Separate, robust SMA connections for LTE and GNSS antennas Switchable 3.3V power for an active GNSS antenna USB-C connectivity Qwiic (I 2 C) connector LED indicators for: Power (VIN and 3.3V) SARA-R5 on Network indicator GNSS timing pulse (1PPS) 3.3V breakout pins for: SARA on Network indicator GNSS timing pulse (1PPS) I 2 C bus SPI bus D0, D1, A0, A1 PWM0, PWM1 SARA I 2 C RTC backup battery Includes 1x MicroMod Asset Tracker Carrier board 1x Hologram eUICC SIM Card 1x MicroMod Update Tool We suggest you add this LTE Antenna , and this SMA GNSS Antenna Documents MicroMod Asset Tracker Carrier Documentation: Schematic Eagle Files Hookup Guide Board Dimensions Arduino Library GitHub Hardware Repo u-blox SARA-R5 LTE-M / NB-IoT module Documentation: Datasheet AT Command Set System Integration Manual Application Development Guide Internet Applications Development Guide GNSS Integration App Note Firmware Update App Note MicroMod Documentation: Getting Started with MicroMod Designing with MicroMod MicroMod Info Page MicroMod Forums

Read more less

Installation Place the X-AIRs on the goggles following a X pattern: Bottom left: LHCP Top left: RHCP Top right: LHCP Bottom right: RHCP Specifications Gain (X-AIR): 9.5-10.5 dBic Gain (OCP): 1.6 dBic Polarization: RHCP and LHCP Beam-width* (X-AIR): 120deg Beam-width @-3dB** (X-AIR): 68deg. *Coverage where reception is at least equivalent to an omni. **Coverage where at least 70% of the max range is obtained. Includes 2x RHCP X-air 5.8 MK.II 2X LHCP X-air 5.8 MK.II 4X 45deg low-loss RP-SMA adapters 1x RHCP OCP with MMCX90 connector 1x LHCP OCP with MMCX90 connector Useful print! X tie brace If you dont have a printer, we can print one for you using our 3D print service FAQ Can I use something other than the OCP with MMCX90 connector on the airunit? -"Yes, if you have pigtails you can use antennas with SMA. Leave a comment while ordering and we can swap for the connector type you need." Can I use this with the vista unit? -"Yes, however the performances wouldn't be as good as they could be with an airunit."

Read more less

The EMAX Hawk Apex 5" Racing Drone features an HDZero VTX system that will lead you to your racing wins! The Hawk Apex encompasses everything engineers have learned over the years while being a top performer in the drone racing world. The lighter-weight frame design with aerospace-grade carbon fiber is durable and agile for high-speed maneuver while the low latency is well suited for professional drone racing. The 2004 brushless motors keep you flying fast, with 2400KV for 4S or 1600KV for 6S. Note: Choose from two receiver options: PNP or ELRS 2.4GHz Features Lighter weight frame design with aerospace-grade carbon fiber Low-latency suited for high-speed maneuvers PNP or ELRS 2.4GHz Receiver Options Made for professional drone racing 2004 Brushless Motors:2400KV for 4S1600KV for 6S Designated power system HDZero VTX System Specifications Camera/VTX: RunCam HDZero VTX System Receiver Options: PNP or ELRS 2.4GHz Motors:2004 2400KV for 4S2004 1600KV for 6S Propellers: Avia 5" Arm Size: 5" Includes 1x EMAX Hawk Apex 5" HDZero HD Racing Drone - 4S or 6S (Choose KV and Receiver) 1x EMAX Avia 5" Propeller (Set of 6) 1x Screwdriver

Read more less

This is a replacement multi band RTK capable GNSS antenna used with the Emlid Reach M2.

Read more less

We don't cluck around When the Armattan Chameleon was released a year ago, it took the multirotor community by storm. And while the minds behind it were relieved that the design was successful, they didn't stop there. Comments and suggestions came in, and the team kept looking for any way they could improve upon the formula. It took months of development and testing, but it's paid off. As 2018 comes upon us, something new is coming. Something awesome. Special thanks to Jason Hay - Designer Ti-metal treat The Armattan Rooster is a compressed-x, freestyle frame. At first glance it may seem similar to the Chameleon, but if you look carefully, almost nothing beyond the shape is the same. First and foremost, the Rooster uses new materials. Armattan developed a new carbon fiber weave in conjunction with this frame. It still has some spring, but is much less likely to delaminate in a high impact. While this carbon will eventually be used in all of Armattan's frames, the Rooster will be the first to sport this upgrade. Another change is that the camera cage is now grade 5 titanium. By moving to a slightly more expensive material, Armattan has doubled the strength of the camera cage at the same mass as the Chameleon's. The rear standoffs on the Rooster are also newly developed for this airframe. They extend out past the rear of the top and bottom carbon to protect from a direct rear impact. In addition, the bolt holes in the middle provides for modular antenna mounting plates: now available to serve and protect a wider variety of VTX's. Lastly, the Rooster uses stainless steel, flathead bolts. Besides the low profile making bolts less likely to damage LiPos or cameras, this hardware is terribly strong. You will find that you'll strip your driver long before you damage your hardware, and the weight gain over using aluminum is minimal. If you take a closer look at the cage, you'll notice a few more important features. As is expected from Armattan, there is a lot of FPV camera protection. You can fly safely with your cam anywhere from 25 to 60 degrees. In addition, the center-point of the camera has been lowered in comparison to the Chameleon. Now your rolls will show less vertical distortion as you bang the sticks. Besides a lower placement, the camera mount supports the Runcam Swift v2, the Foxeer Arrow v3, or any other standard-mount FPV camera with a 28.5mm case. The metal of the cage was also stretched from 4x4mm to 6x2mm to allow for the use of M3 hardware. This is something that certainly would not have been possible without the incorporation of titanium. And lastly, in order to increase strength and reduce weight, the HD camera has been fixed at 35 degrees - a value seems to situate many pilots without modification. In fact, the weight reduced here makes a difference. The Rooster comes in just under what the Chameleon weighs. ARMATTAN ROOSTER FLOWAGE - Freestyle flight by Team Armattan Pilot SukiFPV The rear of this craft has a couple options that aren't obvious to the naked eye. The first option is the standard rear plate. This comes with 3 molded rubber components: a grommet for mounting the SMA adapter, and two cones to mount your RX antenna tubes. This should provide a clear and satisfying mount point for any pilot with any VTX. If you use a "Unify" style transmitter (that has two flanges on the sides of the SMA pigtail), you may prefer the optional rear-plate. That plate allows you to hard-mount the SMA adapter to the rear of your craft, and even provides you with a space below for a rear-mounted XT-60. Please note: for both rear plates, it is recommended that you use a VTX that has a pigtail. If that wasn't enough, there's some final upgrades that you may not have seen. The swappable arms are clear of the center-stack, providing you with a couple extra millimeters of stack height while maintaining a 20mm deck height. This also allows you to make upgrades or change a broken arm without needing to unscrew the FC. In addition, the front arm slots around the titanium cage creating a bomb-proof mounting point. The widened camera cage, as previously mentioned, allows for all M2 bolts to be removed from the frame's construction. Rejoice, for now you can construct your entire frame with a single hex driver! Lastly, the small, interior top-plates are completely optional. While they provide a bit more strength and an extra area to mount a VTX or RX, we feel strongly enough about the frame to warranty it with or without those two plates of carbon. Did you just say warranty? You want it? You got it. If you cock up your frame you can rest assured knowing that Armattan's legendary transferable, lifetime- warranty has got you from your aluminum tail-feathers to your titanium head. That's our promise. Included: Titanium: 2x Camera-cage braces Hardware: 6x 4mm flat-head M3 bolts 8x 6mm flat-head M3 bolts 3x 8mm flat-head M3 bolts 3x 10mm flat-head M3 bolts 10x 12mm flat-head M3 bolts 10x M3 sunk-nuts 10x Nylock M3 nuts 16x 6mm M3 button-head (motor) bolts 6x 8mm M2 cup-head (camera) bolts Aluminum: 1x 28.6mm Front standoff (silver) 2x Rear standoffs (black) Nylon: 5x 6mm standoffs 5x nuts 5x 16mm button-head M3 bolts Carbon Fiber: 1x 2mm Top (LiPo) plate 1x 1.5mm HD Cam plate 1x 1.5mm Small front (top) plate 1x 1.5mm Small rear (top) plate 1x 2mm Rear VTX plate (Standard or TBS) 1x 4mm Main plate 4x 4mm Arms - 5 inch or 6 inch Other: 1x Lipo strap 1x LiPo foam pad 1x HD camera foam pad 4x Dog-bone landing pads 1x Molded rubber SMA grommet (only included with standard VTX plate) 3x Molded rubber antenna tube mounts (only included with standard VTX plate)

Read more less

With a 3800Kv brushless motor and its rear set wheelie bar, the Tracer brushless truly lives up to its name. Powered by a 7.4V 1000mAh 2S Lipo battery With the included metal rear dogbones, the durability of the Tracer is unrivaled. And with its new upper suspension links, give you more control of your truck A new 100-meter range radio is included with the monster truck, and the Tracer brushless edition features coil-sprung shock absorbers with mounting points, double wishbones for smooth suspension movement while steering through the rough stuff, and shaft-driven 4WD providing traction in all conditions. Plug in front bumper LED lights are standard and there are a number of up spec LED options for both the front and back of your truck to add that final touch! Features 99% Ready-To-Run 2.4ghz radio system w/100m range Fully proportional throttle and steering Splashproof Brushless ESC/Receiver unit Splashproof 1kg rated servo 3800kv Brushless Motor 7.4v 1000mAh 2S LiPo Battery Front & Rear Geared Differentials Coil sprung shock absorbers Double Wishbone Suspension Front CVA Driveshafts Metal Rear Dogbone Driveshafts Low Friction Ball Bearings USB Charger Detailed 4x4 Off Road Truck Bodyshell Plug-in Front LED lights included Oversized Wheels & Block Pattern Tyres Wheelie Bar Wide Range of Options Available Included FTX Tracer Brushless Truck Transmitter: 2.4ghz Steerwheel Charger: USB Charger Battery: 1000mAH 2S 7.4V LiPo LED Light Set You need 3pc AA batteries to power the radio control before you can drive this car.

Read more less

Get ready for a showdown with the Outlaw, the latest addition to the FTX off road buggy range. Loosely based on the powerful Ultra 4 buggies that take up the challenge of racing through the US' west coast deserts, the Outlaw is the perfect mix of RTR entry level fun with a bit of scale realism thrown in to boot. Under the semi-scale tubular roll cage, body panels and cockpit are some new and established features. The front suspension assembly is the same as FTX stablemates the Carnage and Bugsta trucks with fully adjustable settings, universal driveshafts, turnbuckles and a heavy-duty metal geared differential. Moving back, the moulded chassis supports the centrally positioned sealed shaft drivetrain, steering servo, motor and receiver box. Semi-scale trailing arm rear suspension sets the Outlaw apart from other off road buggies in the FTX range. This long travel suspension, with huge articulation is what full size U4 buggies use to tackle the uneven desert surface. With drive to the rear axle assembly via a telescopic sliding diveshaft along with multi-position shock absorber mounting points, the Outlawcan handle some of the roughest terrain. With established Etronix radio equipment, the brushed waterproof speed control, 550 motor and Voltz NiMH battery are the ideal combination for beginners. Plus with the sweet addition of full aluminium oil filled shock absorbers and scale looking all terrain tyres the Outlaw is the perfect choice RTR for enthusiasts looking for a rig with a bit of character! FTX Outlaw U4 Features 99% Ready to run Etronix EX2 Sport 2.4ghz radio Etronix waterproof steering servo Waterproof speed control 550 Brushed motor Voltz 1800mAh NiMH 7.2v Battery Wall charger Pre-painted cage style body panels Tubular style roll cage with spare wheel & tyre Internal driver cockpit Moulded tub chassis Sealed transmission 4wd shaft drive Trailing arm rear link suspension Receiver box Lightweight high impact arms Aluminium big bore oil filledadjustable shocks Gearbox metal crown & pinion gear Front universal driveshafts Adjustable turnbuckles Fully adjustable suspension including, droop, camber, toe-in Chassis accepts NiMh or LiPo battery Wide range of option parts available FTX OUTLAW U4 CHASSIS Featuring Semi-scale trailing arm rear suspension and long travel shock absorbers the Outlaw is set to tackle any terrain in its path. FTX OUTLAW U4 SUSPENSION The long reach aluminium oil filled shock absorbers are fully adjustable and with multiple mounting options can be fine tuned to suit whatever is thrown at them and help the Outlaw over any obstacles. FTX OUTLAW U4 RADIO EQUIPMENT The Etronic Radio will keep you in control alongside the Etronix brushed waterproof speed controller, Etronix waterproof servo, powerful 550 brushed motor and the Voltz NiMH battery pack. The Outlaw U4 really is ready to tackle anything with ease and plenty of speed. Specifications Scale Size: 1/10th Length: 505mm Width: 320mm Height: 240mm Wheelbase: 328mm Tyre Diameter: 135mm Tyre Width: 55mm Gear Ratio: 11.2:1 Drive: 4WD Please Note: This kit is sold in RTR (Ready-to-run) format and requires 8 x AA batteries for completion.

Read more less

Features Circularly Polarized Sector type beam shape (widest on horizontal) Mount direct on DJI faceplate with included adhesive backing Compact low-profile design on your goggles, easy to store and transport High 13 dBic for unsurpassed long range and signal penetration Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band Super wide 150 degree beam for each antenna combining to 180deg beam width Custom knurled RP-SMA connectors Highly compact included stubby antennas for combined directional and omnidirectional coverage Dual elements array provide 13dBic circular polarized beam of 75deg By combining the two elements onto a single feed, the gain is boosted and horizontal coverage is widened by compromising the vertical coverage which isn't used much in FPV. Low profile design, only 15mm thick. Most compact antennas of this gain level at only 15mm thickness, letting you leave them on at all the time without fear of breaking them. The included double-sided foam tape give a solid bound to your goggles's face plate and install in minutes. Custom made RP-SMA connectors, fit the DJI FPV goggles perfectly. As with all other components of X²-AIR antennas, the custom RP-SMA connector is made to the highest standards to fit your goggles perfectly and make sure every bit of RF power is transferred from the X²-AIR. A knurled finish provide easy tightening and a quality look exclusive to TrueRC. Paired with our ever popular singularity stubby. Specs (X²-air) Bandwidth: 5.1GHz-7.0GHz Gain: 13 dBic Polarization: LHCP or RHCP Beam-width Horizontal*: 150deg Beam-width Vertical*: 62deg Hor. beam @-3dB**: 75deg. Vert. beam @-3dB**: 34deg. Connector: Custom knurled RP-SMA Dimension: 72mm x 34mm x 15mm Weight: 20g each Include adhesive mount for installation onto DJI FPV goggles. *Coverage of individual antenna where reception is at least equivalent to an omni. **Coverage of individual antenna where at least 70% of the max range is obtained. Specs (stubby) Gain: 1.9dbic Polarization: RHCP or LHCP (Stock DJI is LHCP) Cross-Polar Rejection : -15 to -30dB (1.9%) Bandwidth: 5.6GHz-6.0GHz Radiation Efficiency: 99% SWR: <=1.5:1 Weight: 3.7 g Size: 12.7mm x 20mm Connector: RP-SMA US. Pat. 10,804,618 Can. Pat. 2968566 Included Two X²-air MKII antennas (one for each sides). Two Singularity stubby antennas 3D Printed Optional Parts True-SMA thumbwheel by HugeOne - Thingiverse

Read more less

reComputer Jetson series are compact edge computers built with NVIDIA advanced AI embedded systems: Jetson-10 (Nano) and Jetson-20 (Xavier NX). With rich extension modules, industrial peripherals, thermal management combined with decades of Seeed's hardware expertise, reComputer Jetson is ready to help you accelerate and scale the next-gen AI product emerging diverse AI scenarios.   reComputer Jetson is compatible with the entire NVIDIA Jetson software stack, cloud-native workflows, industry-leading AI frameworks, helping deliver seamless AI integration. Features Hand-size edge AI device with an overall dimension of 130mm*120mm*50mm, fits in everywhere. Powered by the 6-core NVIDIA Carmel ARM®v8.2 64-bit CPU 6MB L2 + 4MB L3. 384-core NVIDIA Volta™ GPU with 48 Tensor Cores delivers 21 TOPS AI performance. Rich peripherals including Gigabit Ethernet port, 4 USB 3.0 Type-A ports, HDMI port and DP ports. Pre-installed NVIDIA official JetPack software, ready for cloud native application. Able to mount on the wall with mounting holes on the back. Support wide range of AI application fast building with our ecosystem partners. Support Allxon to enable efficient remote hardware management services Application: For next-gen autonomous machine With edge AI developers can deploy machine learning models in solving demanding challenges for advanced robotics and autonomous machines in the fields: Edge AI into the Wild: UAV, Drone, Wildlife protection, Agriculture Smart City: Traffic, Retail, Healthcare Industry 4.0: Manufacturing, Logistics, Deliver, Service Power-efficient AI computer, compact rich I/Os for Endless AI possibilities: reComputer Jetson - 20 comes with Jetson Xavier NX delivers up to 21 TOPS, making it ideal for high-performance compute and AI in embedded and edge systems. You get the performance of 384 NVIDIA CUDA® Cores, 48 Tensor Cores, 6 Carmel ARM CPUs, and two NVIDIA Deep Learning Accelerators (NVDLA) engines. Combined with over 59.7GB/s of memory bandwidth, video encoded and decoded, these features make Jetson Xavier NX the platform of choice to run multiple modern neural networks in parallel and process high-resolution data from multiple sensors simultaneously. Jetson Xavier NX supports multiple power modes, including low-power modes for battery-operated systems, and delivers up to 14 TOPs for AI applications in as little as 10 W. Powerful reference carrier board: Seeed reference carrier board for Jetson-20-1-H2 is a high-performance, interface rich NVIDIA Jetson Xavier NX compatible carrier board, providing HDMI 2.0, Gigabit Ethernet, USB3.0, USB 2.0, M.2 key E wifi / BT, M.2 key M, CSI camera, CAN, GPIO, I2C, I2S, fans, and other rich peripheral interfaces Take advantage of the small form factor, sensor-rich interfaces, and big performance to bring new capability to all your embedded AI and edge systems. Prebuild system for edge AI integration All NVIDIA® Jetson™ modules and developer kits are supported by the same software stack, enabling you to develop once and deploy everywhere. Jetson Software is designed to provide end-to-end acceleration for AI applications and accelerate your time to market. We bring the same powerful NVIDIA technologies that power data center and cloud deployments to the edge. NVIDIA JetPack includes NVIDIA Container Runtime with Docker integration, enabling GPU accelerated containerized applications on Jetson platform. Jetpack also brings support for NVIDIA Triton™ Inference Server to simplify the deployment of AI models at scale. Comparison between jetson-20-1-H2 and Xavier NX dev kit NVIDIA Jetson Xavier NX Developer Kit reComputer Jetson-20-1-H2 Xavier NX (not production version) Xavier NX 16 GB (production version) 21 TOPS 384-core NVIDIA Volta™ GPU 6-core NVIDIA Carmel ARM®v8.2 64-bit CPU 6 MB L2 + 4 MB L3 8 GB 128-bit LPDDR4x @ 51.2GB/s 16 GB 128-bit LPDDR4x @59.7GB/s microSD (Card not included) 16 GB eMMC 2x 4K @ 30 | 6x 1080p @ 60 | 14x 1080p @ 30 (H.265/H.264) 2x 4K60 | 4x 4K30 | 10x 1080p60 | 22x 1080p30 (H.265) 2x 4K60 | 4x 4K30 | 10x 1080p60 | 20x 108p30 (H.264) 2x 4K @ 60 | 4x 4K @ 30 | 12x 1080p @ 60 | 32x 1080p @ 30 (H.265) 2x 4K @ 30 | 6x 1080p @ 60 | 16x 1080p @ 30 (H.264) 2x 8K30 | 6x 4K60 | 12x 4K30 | 22x 1080p60 | 44x 1080p30 (H.265) 2x 4K60 | 6x 4K30 | 10x 1080p60 | 22x 1080p30 (H.264) 1*RJ45 Gigabit Ethernet Connector (10/100/1000) 4 * USB 3.1 Type A Connectors; 1 * Micro-USB port for Device mode; 4 * USB 3.0 Type A Connectors； 1 * Micro-USB port for Device mode; 2*CSI Camera (15 pos, 1mm pitch, MIPI CSI-2 ) 1*HDMI Type A+ 1*DP 1* FAN(5V PWM) 1*M.2 Key E(WiFi/BT included) 1*M.2 Key E 1*M.2 Key M - 1*RTC Socket 1* 40-Pin header DC Jack 19V 90W 4.74A MAX 103 mm x 90.5 mm x 31 mm 130mm x120mm x 50mm(with case) Specifications Module Technical Specifications Jetson Xavier NX 16GB AI Performance 21 TOPS GPU 384-core NVIDIA Volta™ GPU with 48 Tensor Cores CPU 6-core NVIDIA Carmel ARM®v8.2 64-bit CPU 6MB L2 + 4MB L3 Memory 16 GB 128-bit LPDDR4x 59.7GB/s Storage 16 GB eMMC 5.1 Power 10 W | 15 W | 20 W PCIe 1 x1 (PCIe Gen3) + 1 x4 (PCIe Gen4), total 144 GT/s* CSI Camera Up to 6 cameras (24 via virtual channels) 14 lanes (3x4 or 6x2) MIPI CSI-2, D-PHY 1.2 (up to 30 Gbps) Video Encode 2x 4K60 | 4x 4K30 | 10x 1080p60 | 22x 1080p30 (H.265) 2x 4K60 | 4x 4K30 | 10x 1080p60 | 20x 1080p30 (H.264) Video Decode 2x 8K30 | 6x 4K60 | 12x 4K30 | 22x 1080p60 | 44x 1080p30 (H.265) 2x 4K60 | 6x 4K30 | 10x 1080p60 | 22x 1080p30 (H.264) Display 2 multi-mode DP 1.4/eDP 1.4/HDMI 2.0 DL Accelerator 2x NVDLA Engines Vision Accelerator 7-Way VLIW Vision Processor Networking 10/100/1000 BASE-T Ethernet Mechanical 260-pin SO-DIMM connector 69.6 mm x 45 mm Carrier Board Technical Specifications Connector Jetson-20-1-H2 NVIDIA® Jetson Xavier™ NX DEVELOPER KIT Jetson module connector 1*Jetson SODIMM connector, 260-pin 1*Jetson SODIMM connector, 260-pin USB 3.0 Type A 4*USB 3.0 Type-A Connector 4*USB 3.0 Type-A Connector USB Micro Type B 1*USB Micro B, RA Female 1*USB Micro B, RA Female Ethernet Port 1*RJ45 Gigabit Ethernet Connector (10/100/1000) 1*RJ45 Gigabit Ethernet Connector (10/100/1000) Display Port 1*HDMI type A and 1*DP 1*HDMI type A and 1*DP CSI Camera Connector 2*CSI Camera (15 pos, 1mm pitch, MIPI CSI-2 ) 2*CSI Camera (15 pos, 1mm pitch, MIPI CSI-2 ) M.2 Key E 1*M.2 Key E Slot (75-pin) 2230 1*M.2 Key E Slot (75-pin) 2230 M.2 Key M 1*M.2 Key M Slot (75-pin) NVME 2280 1*M.2 Key M Slot (75-pin) NVME 2280 Multifunctional Port 2.0 Pitch 40 PIN 2.0 Pitch 40 PIN Button Header 1*Button Header 1*Button Header FAN Connector 1*Picoblade Header 1*Picoblade Header CAN 1*CAN Bus Header (1x4, 2.54mm pitch, RA) Reserved RTC 1*RTC Back-up Coin Cell Socket (CR1220) Reserved Power 1*DC Input Power TE Connector 1*DC Input Power TE Connector Part List 1 x Acrylic Cover 1 x Aluminium Frame 1 x Jetson Xavier NX 16GB module 1 x Heatsink 1 x Carrier board 1 x 19V/4.74A (MAX 90W) Power Adapter (Power cable not included)

Read more less

reComputer Jetson series are compact edge computers built with NVIDIA advanced AI embedded systems: Jetson-10 (Nano) and Jetson-20 (Xavier NX). With rich extension modules, industrial peripherals, thermal management combined with decades of Seeed's hardware expertise, reComputer Jetson is ready to help you accelerate and scale the next-gen AI product emerging diverse AI scenarios. reComputer Jetson is compatible with the entire NVIDIA Jetson software stack, cloud-native workflows, industry-leading AI frameworks, helping deliver seamless AI integration. Features Hand-size edge AI device with an overall dimension of 130mm*120mm*50mm, fits in everywhere. Powered by the quad-core ARM® Cortex®-A57 MPCore processor. 128-core NVIDIA Maxwell™ GPU with 128 NVIDIA CUDA® cores delivers 0.5 TFLOPs (FP16). Rich peripherals including Gigabit Ethernet port, USB 3.0 and USB 2.0 Type-A ports, HDMI port. Pre-installed NVIDIA official JetPack software, ready for cloud native application. Able to mount on the wall, mounting holes on the back. Support wide range of AI application fast building with our ecosystem partners. Support Allxon to enable efficient remote hardware management services. Application: For next-gen autonomous machine With edge AI developers can deploy machine learning models in solving demanding challenges for advanced robotics and autonomous machines in the fields: Edge AI into the Wild: UAV, Drone, Wildlife protection, Agriculture Smart City: Traffic, Retail, Healthcare Industry 4.0: Manufacturing, Logistics, Deliver, Service Power-efficient AI computer, compact rich I/Os for Endless AI possibilities: reComputer Jetson - 10 comes with Jetson Nano delivers 0.5 TFLOPs (FP16), making it ideal for high-performance compute and AI in embedded and edge systems. You get the performance of 128 NVIDIA CUDA® Cores, quad-Core ARM CPUs. Combined with over 25.6GB/s of memory bandwidth, video encoded and decoded, these features make Jetson Nano the platform of choice to run multiple modern neural networks in parallel and process high-resolution data from multiple sensors simultaneously. Now, you can innovate at the edge with powerful and efficient AI, computer vision, and high-performance computing at just 5 to 10 watts. Powerful reference carrier board: Seeed reference carrier board for Jetson-10-1-A0 is a high-performance, interface rich NVIDIA Jetson Nano compatible carrier board, providing HDMI 2.0, Gigabit Ethernet, USB 3.0, USB 2.0, CSI camera, GPIO, I2C, I2S, fans, and other rich peripheral interfaces. It has nearly the same functional design and size as the carrier board of NVIDIA Jetson Nano 2GB Developer Kit | NVIDIA Developer . Take advantage of the small form factor, sensor-rich interfaces, and big performance to bring new capability to all your embedded AI and edge systems. Prebuild system for edge AI integration All NVIDIA® Jetson™ modules and developer kits are supported by the same software stack, enabling you to develop once and deploy everywhere. Jetson Software is designed to provide end-to-end acceleration for AI applications and accelerate your time to market. We bring the same powerful NVIDIA technologies that power data center and cloud deployments to the edge. NVIDIA JetPack includes NVIDIA Container Runtime with Docker integration, enabling GPU accelerated containerized applications on Jetson platform. Jetpack also brings support for NVIDIA Triton™ Inference Server to simplify the deployment of AI models at scale. Comparison between Nano 2GB developer kit and Jetson-10-1-A0 Comparison between Nano 2GB developer kit and Jetson-10-1-A0： NVIDIA® Jetson Nano™ 2GB Developer Kit reComputer Jetson-10-1-A0 Nano (not production version) Nano (production version) 472 GFLOPS 128-core NVIDIA Maxwell™ Quad-core ARM A57 @ 1.43 GHz 2GB 64-bit LPDDR4 25.6GB/s 4GB 64-bit LPDDR4 25.6GB/s microSD (Card not included) 16 GB eMMC 4Kp30 | 4x 1080p30 | 9x 720p30 (H.264/H.265) 4K30 | 2x1080p60 | 4x1080p30 | 4x720p60 | 9x720p30 (H.265 & H.264) 4Kp60 | 2x 4Kp30 | 8x 1080p30 | 18x 720p30 (H.264/H.265) 4K60 | 2x 4K30 | 4x 1080p60 | 8x 1080p30 | 9x 720p60 (H.265 & H.264) 1*RJ45 Gigabit Ethernet Connector (10/100/1000) 1 * USB 3.0 Type A Connector; 2 * USB 2.0 Type A Connector; 1 * Micro-USB port for Device mode; 1 * USB Type C for 5V power input 1 * USB 3.0 Type A Connector; 2 * USB 2.0 Type A Connector; 1 * USB Type C for Device mode; 1 * USB Type C for 5V power input 1*CSI Camera (15 pos, 1mm pitch, MIPI CSI-2 ) 2*CSI Camera (15 pos, 1mm pitch, MIPI CSI-2 ) 1*HDMI Type A 4-pin 5V PWM fan header (not fitted on some early units) 1* FAN(5V PWM) - 1*M.2 Key E - - - 1*RTC Socket 1* 40-Pin header USB-Type C 5V⎓3A； 100 mm x 80 mm x 29 mm 130 mm x 120 mm x 50 mm(with case) Specifications Module Technical Specifications GPU NVIDIA Maxwell™ architecture with 128 NVIDIA CUDA® cores 0.5 TFLOPs (FP16) CPU Quad-core ARM® Cortex®-A57 MPCore processor Memory 4 GB 64-bit LPDDR4 1600MHz - 25.6 GB/s Storage 16 GB eMMC 5.1 Flash Video Encode 250 MP/sec 1x 4K @ 30 (HEVC) 2x 1080p @ 60 (HEVC) 4x 1080p @ 30 (HEVC) Video Decode 500 MP/sec 1x 4K @ 60 (HEVC) 2x 4K @ 30 (HEVC) 4x 1080p @ 60 (HEVC) 8x 1080p @ 30 (HEVC) Camera 12 lanes (3x4 or 4x2) MIPI CSI-2 DPHY 1.1 (18 Gbps) Connectivity Wi-Fi requires external chip 10/100/1000 BASE-T Ethernet Display HDMI 2.0 or DP1.2 | eDP 1.4 | DSI (1 x2) 2 simultaneous UPHY 1 x1/2/4 PCIE, 1x USB 3.0, 3x USB 2.0 I/O 1x SDIO / 2x SPI / 4x I2C / 2x I2S / GPIOs -> I2C, I2S Size 69.6 mm x 45 mm Mechanical 260-pin edge connector Carrier Board Technical Specifications Connector Jetson-10-1-A0 NVIDIA Jetson Nano 2GB Developer Kit | NVIDIA Developer Jetson module connector 1*Jetson SODIMM connector, 260-pin 1*Jetson SODIMM connector, 260-pin USB 3.0 1 * USB 3.0 Type A Connector 1 * USB 3.0 Type A Connector USB 2.0 2 * USB 2.0 Type A Connector 1 * USB 2.0 Type C Connector 2 * USB 2.0 Type A Connector1 * USB Micro B, RA Female Ethernet Port 1*RJ45 Gigabit Ethernet Connector (10/100/1000) 1*RJ45 Gigabit Ethernet Connector (10/100/1000) Display Port 1*HDMI Type A 1*HDMI Type A CSI Camera Connector 2*CSI Camera (15 pos, 1mm pitch, MIPI CSI-2 ) 1*CSI Camera (15 pos, 1mm pitch, MIPI CSI-2 ) M.2 Key E 1*M.2 Key E Slot (75-pin) 2230 1*M.2 Key E Slot (75-pin) 2230 M.2 Key M Multifunctional Port 2.0 Pitch 40 PIN 2.0 Pitch 40 PIN Button Header 1*Button Header 1*Button Header FAN Connector 1*Picoblade Header 4-pin 5V PWM fan header (not fitted on some early units) CAN Micro SD card Reserved RTC Reserved Reserved Power 1* Type-C connector 1* Type-C connector Part List 1 x Acrylic Cover 1 x Aluminium Frame 1 x Jetson Nano module 1 x Heatsink 1 x Carrier board

Read more less

The ultimate drone photography backpack. Your DJI drone, cameras, lenses and travel gear in a single backpack. Features Protective Hard foam shell DSLR Camera and lenses compartment Expandable Roll Top Ample space for clothes and other travel gear Highly adjustable compartments Dedicated laptop pocket Integrated controller harness Ergonomic back padding Travel equipment rarely comes cheap, so it's always a good idea to have some type of protection for your expensive gear when you are on the go. This drone backpack from Torvol is designed to hold your DJI Phantom sized drone, DSLR camera, travel necessities, and laptop. The 15-liter expandable roll-top compartment can hold a considerable number of things, while the custom foam padding and adjustable foam dividers protect your valuable gear. This backpack is designed to deliver the most comfort in any configuration. It is fully adjustable inside for a better fit and maximum comfort. With ergonomic back padding and straps, it is perfectly weighted and so designed that it won't put any stress on your body, no matter how remote your flying destination might be. Also from our testing, this backpack easily carries 2 DJI Mavic Pro/Zoom series drones. Key Features Laptop Pocket Quick Access on the side Internal Organizer Pockets Tripod Straps on the side Modular dividers with velcro Rain Cover at the bottom Gusset Pockets on one side. With enough space to bring your drone and camera with spare lenses, we are sure you get the best content you need. With 80% of the size of the Explorer Backpack, this is the best fit for a day trip with your essentials. The padded space dividers and security straps keep all your valuable gear in place.As creators we know as no other that some moments come by once in a lifetime and we wouldn't want you to miss it. With the quick access on the side you grab your camera in no time and you are ready to capture all the best moments. Specifications Weight - 1.6 kg Dimensions - 25 × 15 × 45 cm Internal Dimensions - 24 x 10 x 35 cm Color - Torvol Graphite Grey / Yellow EAN Code - 700693501620

Read more less

Features Marvelmind Super-Beacon (19kHz, 25kHz, 31kHz, 37kHz, 45kHz) More sensitive, than Beacon HW v4.9 Dual-use beacon: Receive and Transmit ultrasonic pulses Work both as stationary and as mobile Receive several ultrasonic frequencies at once Works with regular Beacons HW v4.9, Mini-RX and Industrial-RX Used for autonomous robots, vehicles, and drones The Marvelmind Super-Beacon is a beacon for Marvelmind precise Indoor positioning and navigation system. It can work both as stationary and as mobile. The system is used for autonomous robots, vehicles, drones, and people as well as for industrial applications requiring precise positioning and localization indoor. The Super-Beacon can receive any ultrasonic frequency from the bands: 19kHz, 25kHz, 31kHz, 37kHz, 45kHz. The filter can be simply selected in the Dashboard. At the same time, the ultrasonic frequency of Beacon HW v4.9 is HW-defined by ultrasonic sensors and can't be changed. Specifications Distance between beacons Reaches up to 50 meters in lab conditions Recommended distance is up to 30 meters (RX4 to RX4) Range of stable tracking of Super-Beacon + Super-Beacon is 20-50% bigger than the range of Beacon HW v4.9 + Beacon HW v4.9 in the same conditions Coverage area Reaches up to 1,000 m2 with the Starter Set configurations Coverage for larger territories is similar to cellular networks Location precision Absolute: 1-3% of the distance to the beacons Differential precision: ±2 cm Differential precision is on par or better than in the Beacon HW v4.9, partially Location update rate Non-Inverse Architecture: 0.05-25 Hz Can be set manually or in automatic mode Depends on the distance between the mobile and stationary beacons Depends on the number of mobile beacons Depends on the radio interface profile (500 kbps vs. 38 kbps) Inverse Architecture: 0.05-25 Hz. Future SW releases are planned to support IMU fusion that will enable an update rate of up to 100 Hz Can be set manually or in automatic mode Depends on the distance between the mobile and stationary beacons Doesn't directly depend on the number of mobile beacons - all of them are receiving Depends on the radio interface profile Power supply and battery lifetime Internal: LiPo battery 1000 mAh Battery lifetime totally depends on usage Receiving beacon mode with 8 Hz update rate and 10m-sub-maps => up to 30h Transmitting beacon with 1/10 Hz update rate => several months Future power saving features may increase battery life to 1year and more External: micro USB - recommended for permanent use Weight 59 grams (including 1000 mAh battery, housing, and 50-mm antenna) 27 grams (bare board w/o battery) What's Included 1 x Marvelmind Super-Beacon (selected ultrasonic frequency) Dimensions Size 55 x 55 x 33 mm

Read more less

We are proud to introduce our Ethix Special Edition Mambo Radio. This edition has a few notable changes that are more tailored to the likings of Mr. Steele & Konasty. First and foremost we gave the front fascia a battleship grey color scheme with a more gritty texture for added grip. Next, the side grips were custom designed with a more rubbery feel for maximum comfort and traction when holding the radio. Along with these physical changes the radio also comes with a gang of upgraded accessories such as, TBS crown jewel stick ends, red and black silicone switch caps (full radio), a new Ethix V2 neck strap, Ethix Stickers, and a heavy-duty low profile retractable kickstand, not to mention the Send dial which goes to "11." All of these adjustments from the stock TBS mambo give it not only some added character and esthetic flare, but they also make it much more tailored to the pro user who wants the best quality and feels out of their radio. We know you will love it and also we would like to thank you for your continued support. Without you, we couldn't keep making cool products like this. - Steele A Class On Its Own Team BlackSheep has redefined the portable remote control with the TBS Tango 2. Now we're back with one of the most popular requests: a compact full-size remote! The TBS Mambo follows in the footsteps, but focuses on all of the things the Tango 2 tries not to have: a larger screen, traditional form factor with switches and potentiometers, JR module bay, replaceable batteries and trim buttons! But do not fear: we haven't made a cookie-cutter remote! With the built-in antenna (external antenna available as optional add-on), the 2-position and momentary gamepad buttons, and TBS Tracer built-in, we've accomplished a few "firsts" that put this radio into a class on its own! Tracer Inside The first radio with TBS Tracer built in. And it fits your existing TBS Crossfire module through the JR bay! TBS Tracer is the world's lowest latency radio link, and builds upon the rock-solid reputation of the TBS Crossfire code base. With the continued development and expansion of the TBS ecosystem, pilots will remain on the bleeding edge of capabilities paired with the ease of use and overall robustness that TBS products are known for. 1.6ms end to end latency 250Hz refresh rate Long range capable High telemetry throughput for Mavlink and long range missions TBS Cloud connectivity Features TBS Tracer built-in CRSF V3 protocol support for lowest latency and most direct response of any remote control available Range of up to 25km / 15mi Built-in antenna for ultimate ruggedness External antenna available as add-on Full size, ball bearing hall sensor gimbals Configurable resistance and tension Adjustable throttle & pitch throw (+/- 10 degrees) Spare spring set included for lower tension Ergonomic shell design with grippy rubber edges 4x 3-position switches 2x potentiometer with center notch 1x 2-position switches 1x momentary button 4x digital trim buttons Perfectly balanced lanyard mount Up to 12 channels supported Parallel 18650 x 2 (not included!) with USB-C 2A charging (2.5 hours for full charge) Speech audio output with audio jack & haptic vibration alert Open Source remote control operating system (FreedomTX, temporary fork of OpenTX) Rocker dial and 3 button menu for super simple navigation High resolution (128*64) black & white LCD screen w/ backlight 100+ model memory with included SD-card TBS Cloud compatible Specification Weight: 565g Battery: 2 x 18650 Audio: 1W speaker & 3.5mm headphone jack Display: 3.5" LCD panel (128 x 64) Antenna: Embedded antenna Switches: 4 x 3pos | 1 x 2pos | 1 x Momentary USB-C Port: Battery charging (5V, 2A), Firmware upgrades & Simulator / HID Included 1 x Ethix Mambo 1 x Springs Set (Lower Tension) 2 x Throttle limitation screws (with allen key) 1 x Custom CNC Kickstand 1 x Ethix Sticker Sheet 1 x Ethix Neck Strap V2 MORE INFORMATION TBS Mambo Manual FreedomTX source code Mambo SD Card Contents download (For Freedom TX 1.2x) TBS Cloud - Wifi Firmware TBS Agent Lite

Read more less

Get ready to enter the speed arena with the DR8 Desert Racer from FTX! (Also known as the Reely Raptor 6s) Big, brutal and fast the DR8 is sure to capture the attention of electric powered brushless fans looking for a fast performer with the added bonus of some scalerealism. Featuring the leading 6S compatible Hobbywing speed control and 4274 2000kv brushless motor, the true test will be finding enough space to unleash the DR8 to its full potential of up to 100kph! At these speeds asolid base is required and the DR8 features heavy-duty materials and a proven design, with 3mm heavy-duty aluminum front and rear braced main chassis, 5mm thick front and rear aluminium shock towers and reinforced moulded suspension components all standard to help soak up any high speed tumbles. The 4wd drivetrain features sealed oil filled metal-geared differentials coupled with spiral toothed output gear and pinion and is finished off with a hardened steelspur gear for a near bulletproof transmission. Fully adjustable pivot ball suspension, front and rear anti-roll bars and big bore adjustable oil filled shock absorbers all contribute to provide race like handling and adjustability for different terrains. The DR8 is topped off with a classic, desert buggy inspired moulded tubular roll cage frame with printed lexan panels and spare wheel. A detailed interior driver cockpit, painted fire extinguishers are all rounded off with super bright front and rear LED light bars. All that you have to do is decide if you want 4S or 6S power. Just make sure you can handle it! Please Note: A 50C rated battery or higher is required for optimal results when running on 6S FTX DR8 Features: 2.4ghz Radio system Waterproof 15kg metal geared servo Hobbywing 150Amp brushless ESC w/XT90 2000kv 4-pole brushless motor Scale moulded tubular roll cage, spare tyre & interior Super bright front & rear LED light bars Pivot ball suspension Heavy-duty Front CVD driveshafts Big bore aluminium-threaded oilfilled shock absorbers Front and rear anti-roll bars 3mm aluminium chassis with side guards 3-differential shaft drive transmission Heavy-duty steel gears Spiral-tooth diff gears Ball bearings Block tread tyres mounted on scale wheels Requires 4S or 6S battery (XT90) & charger Documents DR8 Manual Specification Length: 540mm Width: 340 mm Height: 220mm Wheelbase: 360mm Please Note: This kit in sold in RTR (Ready-to-run) format but still requires batteries for the car and radio controller.

Read more less

The Vantage was FTX's first move into Ready-To-Run RC models and has continued to be one of the most popular in the range ever since. Despite this we thought it was time to give it a small facelift by introducing the Vantage 2.0 which features a new paint scheme for the body and wing, along with black wheels for a more racey look. The latest Etronix EX3G radio is included, along with a 60A waterproof brushed speed control and USB charger. Thesame 4wd shaft drivetrain features metal diff gears and front universal driveshafts, while an integrated slipper helps protect the drive from possible damage. With adjustable turn buckles all round and large bore oil filled shock absorbers the Vantage Brushed is raring to go at a truly amazing price. In addition if you want to tune and upgrade your Vantage Brushed, FTX provide a wide range of carbon and aluminium upgrades that will bring your ride up to a whole new pro level. FTX Vantage Features: 2.4Ghz Etronix Pulse EX3G Radio 60A waterproof ESC for NiMh/LiPo 550 brushed motor Waterproof 3kg steering servo Voltz 1800mAh 7.2v NiMH battery USB charger for battery New Graphic painted body & wing Moulded tub chassis 4wd shaft drive with slipper system Unique gearbox design for low CG Lightweight high impact arms Big bore oil filled adjustable shocks Gearbox metal crown & pinion gear Front universal driveshafts Adjustable turnbuckles Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc Slipper for drivetrain damage protection Chassis accepts NiMh or LiPo battery Documents FTX Vantage 2.0 Manual Specification Length: 415mm Width: 255mm Heigh: 142mm Wheelbase:275/280mm Tyre: 88 x 39mm (rear) - 88 x 34mm )front) Gear Ratio: 8.3:1 Weight: 1710g Please Note: This kit in sold in RTR (Ready-to-run) format and requires AA batteries for completion.

Read more less

SPECIFICATIONS Bundle: Bundle 1 CRI: 95+ Color Temperature: 2500k-8500k,2500K-9000K Inbox adaptor: No Lighting Type: RGB Video Light Package: Yes Power: 6W Power Source: Other Size: 66*80*30mm Description: Upgrade your on-the-go content creation with the VL49, a powerful pocket-sized RGB LED light perfect for vlogging, photography, and video shoots. This versatile light delivers full-color RGB (16 million hues) + bi-color white light (2500K-9000K), giving you endless creative lighting options. With 800LUX brightness and a built-in 2000mAh battery (Type-C rechargeable), it provides studio-quality illumination anywhere. The strong magnetic back + 3 cold shoe mounts lets you attach it to cameras, smartphones, tripods, or metal surfaces instantly. Whether you need warm ambiance, cool daylight, or vibrant RGB effects, this mini powerhouse is ideal for portrait fill light, product shots, live streaming, and low-light enhancement. Feature: Professional RGB LED Video Light: The new version VL49 RGB LED video light adopts 60 high color rendering LED beads, with an illumination angle up to 120°, the brightness can reach 800LUX@0.5m, the highest CRI95 can completely match the perfect color of sunlight and ensure that its light is natural and lifelike.HUE & Brightness & CCT Adjustable: Hue adjustable from 0 degree -359 degree; Brightness from 0%-100% dimmable; Color temperature from 2500K(warm) to 9000K(cold) dimmable.2000mAh Large Capacity Battery: Built-in 2000mAh rechargeable lithium battery, max brightness output up to 2 hours, min brightness output up to 10 hours. With a Type-C charging port on the camera video light, it can also be used while charging.Magnetic Attraction Design: Back Side Magnet Adsorption Design, adsorbs on most metal surfaces, and sets up the scene easily. Mini pocket size, lightweight, portable photography light, making your video creation easier.Small Size & Standard 1/4 Screw: The pocket light size is about 66mm*80mm*30mm, easy to carry with one hand, and is a must-pack item for your camera bag. It is very small but puts out a decent amount of light. The standard 1/4 screw is suitable for the tripod, also with a 3 cold shoe mount.  

Read more less

SPECIFICATIONS Working Temperature: -25 ° ∽ +40 °  Power: 18/24/35/45w Voltage: AC12V, 50-60Hz Material: ABS+PC cover Emitting Color: RGB/White/Warm White Diameter: 12W 230X58MM,18W 25W 35W 45W 295X70MM Wire Length: 1.5m Body Material: ABS Choice: yes Installation Method: Self-Contained Is Bulbs Included: No Item Type: Underwater Lights Light Source: LED bulbs Power: 12W 18W 25W 35W 45W Power Source: AC Protection Level: IP68 Size: Dia230mm/Dia295mm Usage: HOLIDAY Voltage: 12 V,12VAC Description: Transform your pool into a mesmerizing oasis with these energy-efficient, high-power LED underwater lights! Designed for inground/above-ground pools, fountains, and spas, these RGB color-changing lights create vibrant aquatic ambiance with 16 million color options and dynamic lighting modes. The IP68 waterproof rating ensures durability in harsh conditions, while the remote control lets you adjust colors, brightness, and effects from the poolside. Feature: Multi-Color RGB LEDs – 16 million colors + static, fade, flash, and smooth transition modes. High Wattage Options – Choose from 12W/18W/25W/35W/45W for different brightness needs. IP68 Waterproof – Fully submersible, resistant to corrosion and pool chemicals. Remote Control – Wireless operation up to 10m range (battery included). Low Voltage (12V AC) – Safe for pool use with included transformer. Easy Installation – Compatible with standard pool niches or surface mounting. Long Lifespan – 50,000+ hours of maintenance-free operation. The lamp is filled with resin inside, 100% waterproof. Low power consumption, high stability. Application: Swimming pool, fountain, pond, spring, water view, artificial waterfall, etc. Noted: It have the memory , it can keep the memory of last color selection It can work for DC/AC 12V Package:1X LED Pool Light1X Plastic bracket1X Explosion Screw Sets1X Remote Controller(Only RGB style includes remote control)(Not include battery) 

Read more less

SPECIFICATIONS Type: Ultra bright Star LED String Lights LED Color: Warm White/White/Multicolor Length: 10M/20M/30M/50M/100M Number of LEDs: 100LED/200LED/300LED/500LED/1000LED Waterproof Level: IP65 Control: Keys Working mode: 8 Mode Work voltage: EU Plug (220V)/US Power Plug (110V) Plug Type：EU/US Base Type: Festoon Body Material: Plastic Features: Hight Brightness Head Number: > 200 Is Batteries Included: No Is Bulbs Included: No Is Dimmable: No Length: 10000 Light Source: LED bulbs Lighting Distance: >30m Luminous Flux: 249-2000 Model Number: Christmas Light Decoration Music: None Occasion: Garden Plug The Tail: No Power Source: DC Remote Control: No Voltage: 24 V Description: Transform any space into a twinkling wonderland with these enchanting fairy lights! Perfect for Christmas, weddings, parties, or year-round decor, these ultra-long LED string lights (10-100 meters) create a dreamy, romantic glow for trees, gardens, balconies, and indoor settings. The waterproof design ensures durability in rain or shine, while the warm white or multicolor options set the perfect mood. Feature: 【Why Choose This String Lights】: Longer Working Time, Super Bright 24V LED String Lights, IP65 Waterproof Performance, High Quality Flexible PC Wire.Upgraded Durable outdoor Lights,make this lights more durable than others.The outdoor fairy string lights with unique ultrabright and big LED Chips. 【Widely Used Decoration String Lights】: With IP65 waterproof performance, can withstand any weather when used outdoors. This outdoor solar lights is a great choice for Party Decorations, Wedding Decorations, Holiday Decorations, Home Decor, Patio, Garden, Yard, Fence, Porch, Tree, Roof and so on. Ideal for:🎄 Christmas trees & holiday displays💒 Wedding backdrops & aisle decor🎉 Birthday parties & festivals🏡 Bedroom, patio, or café lighting  

Read more less

SPECIFICATIONS Name:LED FLOODLIGHT Power: 50W/100W/150W Voltage: AC220~240v LED Chip Type: SMD 2835 Color Temperature: Cold White / Warm Light Base Type: None Body Material: Aluminum Choice: yes Finish: Paint Spraying Is Bulbs Included: Yes Item Type: flood lights Light Source: LED bulbs Luminous Flux: 249-2000 Model: LED Floodlight Model Number: LED Floodlight Occasion: Outdoor Wall Power Source: AC Protection Level: IP65 Shade1: Led Flood Light Shade12: Spotlight LED Reflector Street Lamp Style: Modern Style Voltage: 220 V Waterproof: IP65 Description: Upgrade your outdoor lighting with this high-power LED floodlight, available in 50W, 100W, or 150W options for bright, energy-efficient illumination. Designed for commercial and residential use, this IP65 waterproof fixture withstands rain, dust, and extreme temperatures, making it perfect for street lighting, building facades, stadiums, parking lots, and garden security. Its wide beam angle (90°-120°) ensures broad coverage, while the durable aluminum housing provides superior heat dissipation for long-lasting performance. Feature: ✔ High-Efficiency LEDs – Bright output (5000-15000 lumens) with low power consumption.✔ IP65 Waterproof – Fully sealed against dust and heavy rain for all-weather use.✔ Wide Voltage (AC 85-265V) – Stable performance even with voltage fluctuations.✔ Adjustable Brackets – Rotate ±90° for precise beam direction.✔ Durable Aluminum Body – Corrosion-resistant with built-in heat sinks for longevity.✔ Instant On/Off – No warm-up time, flicker-free lighting.✔ Long Lifespan – 50,000+ hours of maintenance-free operation. Ideal for: Street & road lighting Warehouse & factory yards Parking lots & gas stations Building façade & architectural lighting Garden, backyard & security lighting

Read more less

SPECIFICATIONS Blade Size: 22 Body Material: ABS Choice: yes Control Method: REMOTE CONTROL Finish: None Installation Method: Self-Contained Is Bulbs Included: No Is Dimmable: Yes Item Type: Ceiling Fans Light Source: LED Luminous Flux: 249-2000 Number of Blades: 3 Number of Lights: 1 pcs Power Source: AC Style: Modern Style Switch Type: REMOTE CONTROL Weight: 2.6KG Description: Upgrade your home comfort with this multi-functional ceiling fan light, designed for bedrooms, living rooms, and dining areas. Combining powerful airflow and energy-efficient lighting, this household integrated ceiling fan keeps your space cool while providing bright, adjustable illumination. Its sleek, modern design blends seamlessly with any decor, making it a practical and stylish addition to your home. Feature: ✔ High Wind Power – Strong airflow for fast cooling in large or small rooms.✔ Integrated LED Light – Bright, energy-saving lighting with dimmable options (warm/white light).✔ 3-Speed Settings – Adjust fan speed for customized comfort.✔ Quiet Motor – Ultra-low noise for undisturbed sleep or relaxation.✔ Remote Control – Easily adjust fan speed, light brightness, and timing modes.✔ Reversible Blades – Switch between summer (cooling) & winter (air circulation) modes.✔ Easy Installation – Fits standard ceiling mounts for hassle-free setup. Perfect for: Bedrooms, living rooms, dining rooms, nurseries, and home offices.

Read more less

SPECIFICATIONS Laser Colors: Red (650nm) + Green (520nm) + Blue (450nm) Laser Power: <100mW (Class IIIA, eye-safe) Control Modes: Voice, sound-activated, remote, auto Rotation: 360° horizontal / 90° vertical Power Supply: AC 110V-240V / DC 5V (USB option) Dimensions: ~6.3 x 4.7 x 3.1 inches Weight: 1.1 lbs Installation Method: Self-Contained Item Type: Stage Lighting Effect Model Number: AL-001 Power (W): 9W Voltage: 5V 4 Lens 72 Pattern: disco lights has 4 lenses, 2 LED background lights, 2 pattern lights compose 72 patterns, the latest upgrade, more patterns and more functions. Remote Control and Sound Activation Easy-To-Use Remote Control, Fully Control The Party Laser With Your Fingers. Use The Remote Control To turn On/Off, Select Any Of 6 Background Colors, Stroboscopic Lighting, Turn On/Off Red/Green Or Two Lasers, Control 3 Sound Activation Modes And an Automatic Mode That Automatically Changes Colors. Description: Turn any space into a pulsing dance floor with this professional RGB laser projector! Perfect for clubs, home parties, DJ stages, weddings, and holiday events, this dynamic light combines high-intensity red, green, and blue lasers with strobe, sound activation, and voice control for an immersive light show. Whether you're hosting a Christmas party, rave, or karaoke night, this compact yet powerful projector syncs to music or responds to voice commands for hands-free operation. Feature: ✔ Bi-Color & Dimmable – Switch between warm and cool lighting with adjustable brightness.✔ Bluetooth Remote – Wirelessly control your smartphone camera from up to 10m away.✔ Universal Phone Holder – Fits all smartphones (4-7 inches) in portrait or landscape.✔ Sturdy Tripod – Extendable up to 60” for standing or desktop use.✔ High CRI ≥95 – Natural, flicker-free lighting for true-to-life colors.✔ 3 Lighting Modes – Steady/Strobe/Pulse effects for creative shots.✔ USB Powered – Works with power banks, laptops, or wall adapters. Perfect for: TikTok, YouTube, makeup tutorials, product photography, Zoom calls & more! Packing list: 1. Party light*12. Power adapter with cable *13. Extra USB cable*14.360 degree adjustment bracket*15. Screw rubber plug bag*16. User Manual*1  

Read more less

SPECIFICATIONS Wattage: 60W Battery Type: 3.7V Lithium-ion battery Battery Capacity: 4200mAh Input &amp output Voltage/Current: 4.2V DC, 1A Waterproof rating: IP65 Material: Aluminum + ABS + PC Dimensions: 6.5*5.7*9.8in Weight: 2.55LB Three kinds of power supply methods:1. 2/3* 18650 lithium batteries (External Battery is not included)2. DC charger3. Car charger Base Type: Wedge Beam Angle: 360° Choice: yes Item Type: Portable Spotlight Light Source: LED bulbs Lumen: 2400LM Model Number: 65131 Model of LED Beads: COB Switch Mode: Side Light/Full Brightness/Low Brightness Use: Outdoor Light /Lighting /Emergency Wattage: 60W   Descriptions: Extreme Brightness & Power Saving: Super bright led work lights rechargeable, 64 LED with 3 brightness level. you can adjust the brightness from 30W to 15W by switch according to the requirements of different conditions. replace 500W traditional halogen bulb by 30W COB LED and 80% less electricity bills for lighting.3 Modes & IP65 Waterproof: Press the switch on button turn on the portable work light: 3000lumen(60W),)2000 lumen(30W), 1000 lumen(15W) brightness and blue & red emergency flashing modes. the best gear in a roadside emergency. IP65 Waterproof rating, ensure the rechargeable work light works fine in rainy days. Feature: ✔ 60W High-Brightness LED – Powerful illumination for wide-area coverage.✔ Rechargeable Battery – Long-lasting power with USB/Li-ion charging (no cords needed).✔ Waterproof & Durable – IP65-rated for rain, dust, and outdoor use.✔ Adjustable Stand & Hook – Freestanding, hanging, or magnetic mounting options.✔ 360° Rotatable Head – Direct light where you need it.✔ Portable & Lightweight – Easy to carry for on-the-go use.✔ 3 Lighting Modes – High/Medium/Low brightness settings.✔ Emergency Ready – Ideal for blackouts, repairs, or roadside fixes. Perfect for:  Camping, garages, construction, emergencies, and outdoor adventures! Easy to Use:  Easy to install and mounted / hang in anywhere what you like. Led work light battery powered, equipped with a high quality power cable and DC plug. Battery charging is more efficient, saving time to replace the battery. Portable & Flexible: Portable and lightweight work light, hanging on truck or hand held. Even on the ground, in the basement, garage or garden at night. adjustable knobs also provides you with the ability to rotate the light by up to 90 degrees vertically and 360 degrees on axis, meet more requirements. Widely Used: Camping, Hiking, Fishing, Barbecue, Car Repairing, Truck, Workshop, Exploring and more Outdoor Activities. Package included: 1* Portable Emergency Work Light1* DC charger ( UK/EU PLUG )1* Car charger 

Read more less

SPECIFICATIONS Body Material: ABS,Copper,Iron Choice: yes Control Method: REMOTE CONTROL Features: Invisible Ceiling Fan with LED Light Finish: None Installation Method: Assembly Is Bulbs Included: No Is Dimmable: Yes Item Type: Ceiling Fans Light Source: LED Luminous Flux: 2000-82000 Number of Blades: 4 Number of Lights: >8 Power Source: AC Style: Modern Style Switch Type: REMOTE CONTROL Description: Upgrade your home comfort with this sleek invisible ceiling fan, combining powerful airflow and modern aesthetics. When turned off, the blades retract seamlessly into the housing for a minimalist look. The energy-efficient DC motor delivers a large air volume while operating whisper-quiet, perfect for bedrooms, dining rooms, and living spaces. Integrated LED lighting provides bright, flicker-free illumination, eliminating the need for separate fixtures. Control everything effortlessly with the included remote (3-speed settings + light dimming). Feature: ✔ Invisible Retractable Blades – Discreet design when off, expands to 42-56 inch when on.✔ High-Speed DC Motor – 30% more airflow than traditional fans with 70% energy savings.✔ Built-in LED Light – Adjustable color temperature (3000K-6000K) + dimmable brightness.✔ 6-Speed Remote Control – Change fan speed, light settings, and timer (1-8 hrs) from anywhere.✔ Ultra-Quiet Operation – As low as 20dB, ideal for light sleepers.✔ Reversible Airflow – Summer (cooling) & Winter (warm air circulation) modes.✔ Easy Installation – Fits standard ceiling junction boxes. Ideal for: Modern homes, apartments, offices, and smart home setups.  

Read more less

SPECIFICATIONS Base Type: Wedge Body Material: Aluminum Choice: yes Color: White/Black/Gray Diffuser: Tempered Glass Features: Outdoor Motion Sensor Waterproof Wall Lamp Finish: Aluminium Baking Installation Method: Self-Contained Is Bulbs Included: Yes Is Dimmable: No Item Type: Wall Lamps Light Source: LED Luminous Flux: 249-2000 Model Number: LP-0629 Power Source: AC Protection Level: IP65 Style: Modern Style Use: Home Lighting Voltage: 85-265V Description: Enhance safety and visibility around your home with this sleek, energy-efficient LED outdoor wall lamp. Equipped with advanced human body sensing technology, it automatically turns on when motion is detected, providing bright illumination for pathways, gardens, courtyards, garages, and entryways. Its IP65 waterproof rating ensures durability against rain, snow, and dust, making it ideal for 24/7 outdoor use. Feature: ✔ Smart Motion Sensor – Detects movement up to 5-8 meters and lights up instantly (adjustable sensitivity).✔ Energy-Saving LED – Bright, long-lasting lighting with low power consumption.✔ IP65 Waterproof – Rust-resistant, durable construction for all weather conditions.✔ Auto On/Off – Illuminates for 15-30 seconds (adjustable) after detecting motion.✔ Modern Slim Design – Sleek black/white finish blends with any exterior decor.✔ Dusk-to-Dawn Mode – Optional setting to activate only in low-light conditions.✔ Easy Installation – Wall-mounted with standard wiring (110V-240V compatible). Perfect for: Driveway & porch security Backyard & garden pathways Apartment corridors & stairwells Garage & shed entrances

Read more less

SPECIFICATIONS Product color: Black Lamp bead model: COB wick Product lens: ABS Product material: ABS Battery specification: built-in rechargeable lithium battery Switch gear: strong light/low light/strobe flash Charging method: USB charging Product color: Black Focusing method: no focus Brightness lumens: 500 lumens Waterproof grade: life waterproof Switch Mode: High/Middle/Low Waterproof: Yes Wattage: 10W Beam Angle: 60° Light Source: LED bulbs Model Number: TM-G14 Model of LED Beads: COB Packing size: 15*5.5*4cm/5.9*2.56*1.57in Net weight: 97g Gross weight: 125g Purpose: Camping/Hunting/Working/Fishing  Description: Light up your outdoor adventures with this ultra-bright COB LED headlamp, designed for hands-free illumination during fishing, camping, hiking, and night work. Featuring a high-lumen COB LED + spotlight dual light source, it delivers wide-area lighting + focused beams for versatile use. The built-in rechargeable battery (Type-C charging) ensures long runtime, while the IPX4 waterproof rating keeps it working in rain or splashes. Adjustable head straps and a lightweight design make it comfortable for extended wear. It is small in size, easy to use and easy to carry. Adjustable headband for ergonomic design. Each headlight is equipped with an adjustable base that tilts back and forth.  Suitable for outdoor activities such as camping, hiking, hiking, night fishing, cave exploration, etc. Feature: ✔ Dual Light Modes – COB LED (floodlight) for wide-area lighting + spotlight for long-distance visibility.✔ Type-C Fast Charging – Built-in 2000mAh battery (4-8 hrs runtime, depending on mode).✔ 3 Brightness Levels – Adjustable intensity (High/Medium/Low) + SOS strobe mode for emergencies.✔ IPX4 Waterproof – Resists rain and splashes for all-weather use.✔ Comfortable & Adjustable – Soft headband with 90° tiltable lamp head for perfect angle.✔ Lightweight & Portable – Only 150g, ideal for long-term wear.✔ Multipurpose Use – Perfect for fishing, camping, cycling, repairs, and night runs. Ideal for: Outdoor enthusiasts, campers, anglers, mechanics, and emergency preparedness. Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-3cm measuring deviation due to manual measurement.      

Read more less

SPECIFICATIONS Brightness Adjustment Range: 0 - 100 Choice: yes Color Temperature: 2500k-8500k Color Temperature Version: Bi-color Version Lighting Type: On-Camera Video Lights Model Number: NA-U800+ Operating Voltage: 110 - 220 Package: Yes Description: Transform your photography and videography with the U800+ LED Video Light, a high-performance lighting solution designed for content creators, YouTubers, photographers, and filmmakers. This bi-color LED panel offers adjustable color temperature (2500K-8500K) and dimmable brightness, ensuring perfect lighting for any scene. Whether you're shooting interviews, product videos, portraits, or live streams, this light delivers soft, flicker-free illumination with professional precision. Feature: ✔ Bi-Color Adjustment – Seamlessly shift from warm (2500K) to cool (8500K) tones to match ambient light or creative needs.✔ High Brightness & Dimming – Ultra-bright LEDs with 0-100% dimmable control for precise lighting levels.✔ Remote Control – Adjust settings wirelessly for hassle-free operation during shoots.✔ Sturdy Tripod Stand – Includes a height-adjustable tripod (up to 7ft) for flexible positioning.✔ CRI ≥95 & TLCI ≥97 – True-to-life color accuracy for professional-grade results.✔ Lightweight & Portable – Easy to transport for on-location shoots or studio setups.✔ Multiple Power Options – Compatible with AC adapter or NP-F batteries (battery not included).✔ Bowens Mount Compatible – Attach softboxes, diffusers, or modifiers for customized lighting.

Read more less

SPECIFICATIONS Base Type: E27 Size: 42 inch：105*105*22 CM 52 inch：132*132*22 CM Color: white, wood, black Material: lron + ABS + Acrylic Color temperature: three colors of light (warm light, neutral light, cold light) Fan speed: 6 levels of adjustment (light wind, medium wind, strong wind) Dual mode: summer/winter Input voltage (volts): 90-220 V Applicable area: 10-25㎡ Control Method: REMOTE CONTROL Features: Ceiling Fan With Light Finish: None Installation Method: Assembly Is Batteries Included: No Is Bulbs Included: No Is Dimmable: Yes Item Type: Ceiling Fans Light Source: LED Luminous Flux: 2000-82000 Model Number: CY01-FAN Number of Lights: >8 Power Source: AC Style: Modern Style Switch Type: REMOTE CONTROL Description: Upgrade your home comfort with this sleek, high-performance ceiling fan, designed for year-round airflow and customizable lighting. Featuring a powerful yet whisper-quiet DC motor, it offers 6 adjustable speeds and a reversible function (downdraft for summer, updraft for winter). The integrated dimmable LED light provides 3 color temperatures (warm/neutral/cool white) to match any mood. With easy installation and a timeless design (available in black, white, or wood finish), it blends seamlessly into living rooms, bedrooms, or covered patios. Stay cool, save energy, and illuminate your space in style! 🌬️💡 Features: This is a modern and simple lighted fan that uses high-quality LED lights and provides 3 color temperatures. Silent DC motor ensures quiet operation. ABS fan blades are safe, non-toxic and environmentally friendly. 6 levels of wind speed can be set to meet the needs under different conditions. Dual mode, in summer, downward airflow quickly cools the room; in winter, upward airflow quickly spreads heat. Suitable for rooms, kitchens, study rooms, living rooms, dining rooms, balconies, etc. It is the best product and gift for you and your children and loved ones. Package includes 1×Fan light; 1×Remote control; 1×Instruction manual Note: There is a small error in product size due to manual measurement, the actual size shall prevail.  

Read more less

SPECIFICATIONS Battery Capacity: 18Wh 7.2V 2500mAh CCT: 2700K-6500K Charging: Type-C Color Temperature: others Color Temperature Version: Bi-color Version Inbox adaptor: No Lighting Type: On-Camera Video Lights Material: TPU Package: Yes Power: 12W Power Source: DC,DC Runtime: 75min(at 100% brightness) Description: The UA12 Portable Air Tube Light is a versatile, ultra-lightweight lighting solution designed for photographers, videographers, and content creators. With its bi-color adjustable range (2700K-6500K), this 12W LED tube provides soft, flicker-free illumination perfect for fill lighting, portraits, product shots, and on-the-go setups. Its flexible silicone body and magnetic base allow for creative positioning—stick it to metal surfaces, wrap it around objects, or mount it on stands for dynamic lighting effects. Ideal for both indoor studio work and outdoor shoots, the UA12 is a must-have tool for achieving professional lighting in any environment. Feature: ✔ Bi-Color Adjustable (2700K-6500K) – Seamlessly shift from warm to daylight tones.✔ Ultra-Portable & Bendable – Silicone body for flexible positioning and easy transport.✔ Magnetic Base + 1/4" Screw Mount – Attach to metal surfaces, tripods, or light stands.✔ High CRI ≥95 – True-to-life color accuracy for professional results.✔ Dimmable Brightness (10%-100%) – Precise control over light intensity.✔ USB-C Powered – Works with power banks, laptops, or AC adapters (great for travel).✔ Durable & Splash-Resistant – Lightweight yet rugged for indoor/outdoor use.   

Read more less

SPECIFICATIONS Power Supply:100 ~240 VAC, 50~60Hz Current Load: 3A (water heating, gas boiler), 16A (electric heating) Sensor: NTC, 10K Accuracy: ±1°C Set Temp. Range: 5-35°C Limit Temp. Range: 5-60°C Power Consumption: <1. 5W Shell Material: PC +ABS ( Fireproof) Installation Box: 86 * 86mm Square or European 60mm Round Box Wire Terminals: Wire 2 x 1.5 mm2 or 1 x 2.5 mm2 Protection Class: IP20 APP:Tuya Smart life Floor Heating Part Type: Floor Heating Thermostats Material: Anti-flammable PC Model Number: M4A Type: Floor Heating Parts Voltage: 220 V Model Type:  GB: Electric floor Heating, 16A (with both internal sensor and floor external sensor) GE: Water Heating / Gas Boiler, 3A (with internal sensor) Description: Upgrade your home’s comfort with the HEAT M4A Smart Thermostat, a versatile and energy-efficient solution for electric underfloor heating, gas boilers, and water heating systems. Compatible with Tuya Smart and voice assistants (Alexa/Google Home), this thermostat lets you remotely control your heating via WiFi from anywhere using your smartphone. Its 3A/16A dual-mode supports both low and high-power systems, while the programmable schedules and temperature curves optimize energy usage. The large LCD display and intuitive interface make adjustments effortless, ensuring a cozy home while reducing utility costs. Ideal for: Modern smart homes, radiant floor heating, HVAC systems, and energy-conscious users. Feature: - 1. Memory Function: Power off protection, save all your settings safely. - 2. Programmable Function: Programmable function only for WiFi type, only Programmable on mobile phones. - 3. Insert and external two sensors. External sensor cable is included for 16A Electric Floor Type. - 4. Suit for various kinds of electric heating system: The thermostat is suitable for heating cable, heating mat, heating film and other electric heating devices. - 5. Wifi function:The wifi thermostat can be controlled by Mobile App wherever you are. - 6. Support to be voice control by Alexa/Google Home   Package Includes: 1 X thermostat 1 X external sensor (only for Electric Floor Heating 16A Thermostats) 2 X screws 1 X English user manual      

Read more less

SPECIFICATIONS Name: Car Chassis Lights / Car Underbody System Lights Material: Silica gel+LED+ABS Light Length: (60cmX2 90cmX2) / (90cmX2 120cmX2) Type: Remote control / App control Item Type: Atmosphere lamp Item Weight: 1 Material Type: ABS+Silica gel+other Size: 60cm Voltage: 12 V Description: Revolutionize your ride with these ultra-bright, waterproof LED underglow lights, designed to give your car, truck, or motorcycle a head-turning custom look. The flexible, high-density LED strips deliver vibrant RGB color-changing effects, controllable via wireless remote or smartphone app. With multiple lighting modes (static, flash, fade, music sync), these lights create an immersive ambient glow for night drives, car meets, or parties. Features: ✔ Full RGB Spectrum – 16 million colors + adjustable brightness.✔ Wireless Control – Change modes via remote or Bluetooth app (iOS/Android).✔ IP67 Waterproof – Resists rain, mud, and car wash sprays.✔ Easy Installation – Self-adhesive strips + durable mounting clips.✔ Music Sync Mode – Pulses to your playlist’s beat.✔ Universal Fit – Works on cars, trucks, SUVs, bikes, and boats.✔ Low-Voltage Safety – 12V DC compatible (includes fuse protection). Note:Please contact us to better resolve any issue before leaving any neutral or negative feedback.Thanks a lot!Package: 1 set  

Read more less

SPECIFICATIONS Name: LED Digital Wall Clock Material: ABS + Acrylic ABS Display: LED Version: common/bluetooth version (white color only) Power supply: Plug-in use Functions: time, date, temperature, day of the week with the screen display, timing, countdown Size: 33*3*22 cm Color: green/blue/red/orange/white Battery Included: No Choice: yes Form: Single Face Is Smart Device: Yes Length: 33 Style: Modern Style Type: Wall Clocks Applicable places: living room, bedroom, study, office Description: Upgrade your space with this Large Digital Wall Clock, featuring a clear LED display with 10 brightness levels for optimal visibility day or night. It includes a dual alarm function, week + week number display, and a timing feature for added convenience. Perfect for bedrooms, offices, or kitchens, its sleek design ensures easy readability from a distance. Stay organized and punctual with this versatile, user-friendly alarm clock that combines functionality with modern style. Feature: * LED digital clock with week and day of the week display, more intuitive and clearer. * Fahrenheit and Celsius switching. * Time, date, temperature and day of the week are displayed on the same screen. * Positive time, countdown function. The maximum length is 99 minutes and 59 seconds. * Ten levels of brightness manual adjustment, automatic light sensitivity. * Dual alarm clock   Package Includes  1 * LED electronic clock   Notes 1. Due to manual measurement and slight color differences, please allow 1-3 cm (0.4-1.18 inches) for different display settings. 2. Due to lighting and screen differences, the color of the item may be slightly different from the picture. Please understand. 3. The product is always on and needs to be plugged in for use

Read more less

SPECIFICATIONS Product name: LED plant grow light Size: 1/2/3/4 head LED Quantity: 20 LED 40 LED 60 LED 80LED Beam angle: 360 Grow LEDs: 80leds (52 red and 28 blue) Body material: PVC PVC Service life: 50000 hours Plug USB plug Dimmable 10 modes (10% to 100%) Timing: 3/9/12 hours Switch: 3 modes (red light, blue light and mixed light) Automatic memory On/Off and cycle memory timer Adjustable 360 degree adjustment Body Material: ABS Choice: yes Installation Method: Self-Contained Is Dimmable: Yes Item Type: grow lights Power Source: DC Voltage: 5V The grow light of this LED light consists of 80 high efficiency grow LEDs (52 red and 28 blue). It meets the needs of plants growing in the absence of sunlight. Red light promotes photosynthesis, germination, flowering and fruiting. Description: Nurture your indoor plants to thrive year-round with this energy-efficient full-spectrum LED grow light. Designed for houseplants, hydroponics, seedlings, and greenhouse setups, it provides sunlike wavelengths (380nm-800nm) to boost photosynthesis. The 10 adjustable brightness levels and 3 timer settings (3H/9H/12H) let you customize light cycles for herbs, succulents, or flowering plants—all powered via USB for convenience. Features: 1.USB power supply, can be easily powered by computer, laptop, notebook, mobile power, USB hub and other 5V USB interface, safe to use. 1.1 For 1/2 head, please select 5V 2A USB adapter, for 3/4 head, please select 5V3A USB adapter. (USB adapter needs to be prepared by yourself) 2. Mini size, easy to carry, plug and play, easy to use. 3. Helps plant growth, high color rendering, increase vividness. 4. Applicable places: all kinds of plant growth at all stages of growth For example: nurseries, seed cultivation, flowers, aquariums, breeding and greenhouses, greenhouses, horticulture and so on. Packing List:  1/2/3/4 Head x Plant Grow Light  

Read more less

SPECIFICATIONS Average Life (hrs): 50000 Choice: yes Features: 405nm Is Batteries Included: No Is Bulbs Included: Yes Item Type: Ultraviolet lamps Luminous Flux: 249-2000 Power Source: AC Voltage: 85-265V Description: Achieve fast, professional-grade curing with this 405nm UV LED lamp, designed for gel nail polish, SLA/DLP 3D resin printing, and industrial adhesive hardening. With 10W/30W power options, it delivers high-intensity ultraviolet light for rapid curing, while the 1.5m switch wire plug ensures convenient operation. Compact yet powerful, it’s a must-have tool for nail technicians, 3D printing enthusiasts, and crafters. UV LED Lamp uses 405nm UV LEDs to quickly cure 405nm UV resin prints, which can effectively cure items in less time than usual. Note: It can not be used directly to cure liquid resins, nor can it cure silkscreens. The resin can be cured within 10-15 seconds within 5 cm of the lamp. NOTE: Thicker parts will take more time to cure. Feature: ✔ 405nm UV Wavelength – Optimized for curing gel nails, SLA/DLP resins, and UV-sensitive adhesives.✔ Adjustable Power (10W/30W) – Switch between modes for different curing needs.✔ Fast Curing Time – Cures gel polish in 30-60 seconds and 3D prints efficiently.✔ Portable & Lightweight – Easy to carry for salon, home, or workshop use.✔ 1.5m Power Cord – Flexible reach with an on/off switch for safety.✔ Durable LED Beads – Long lifespan with stable UV output.✔ Wide Coverage – Uniform light distribution for even curing. Ideal for: Nail salons & DIY gel manicures SLA/DLP 3D resin printing Jewelry making & UV glue curing Industrial small-part bonding Please Notice: There are only 3 kinds of plugs for this uv lamp, EU/US/UK plug. Lamp not include Solar Turntable 360°Rotating Stand, turntables are for display purposes only. Due to the strong UV output, please protect your eyes when using this lamp. Application: UV curing, resin curing (SLA DLP printing curing). This light can be used for DIY curing packs or handheld applications.

Read more less

SPECIFICATIONS Base Type: Wedge Battery Type: LITHIUM ION Body Material: ABS Choice: yes Is Batteries Required: No Item Type: Portable Lanterns Light Source: LED bulbs Lighting Period (h): 8 Model Number: KXK-686 Power Source: Rechargeable Battery Features: Double Color Lights, the metal frame, Long Endurance, with magnetic suction  Key Function: A key: press the white light, press the second warm white light, press the third white light + warm white light, long-press each file for infinitely dimming B key: press the white light, press the second red light, press the third red and white light burst flash, in any working condition, long press XPE for dual-lamp strong light, long press XPE for infinitely dimming Lamp beads: 5730 white light 60pcs + warm white light 48pcs + red light 6pcs, XPE 2pcs  Lumens: 5730 1000LM or so                     XPE 200LM or so Color temperature: 6500-7000K  Using time:4-24H  Battery capacity:18650*2 4000mAh Range: irradiation distance 100 meters Waterproof grade: IP44 Material: ABS + PC + metal aluminum + magnet Product Size: 136*96*32.5 mm Charging mode: 5V 1A Type-C charging port Output: USB output charging treasure function Use: Hiking, Camping, Daily Carry, Night Fishing Description: Light up your adventures with this versatile LED camping light, designed for outdoor enthusiasts, survivalists, and emergency preparedness. This ultra-bright, waterproof lamp serves as a portable searchlight, tent lantern, and emergency beacon, with 360° illumination for campsites, hikes, power outages, or roadside emergencies. Its rechargeable battery ensures long-lasting light, while the hanging hook and magnetic base offer flexible placement in any situation. Feature:  ✔ 3-in-1 Lighting Modes – Switch between high beam (searchlight), warm lantern glow, and strobe (SOS).✔ 10,000mAh Rechargeable Battery – Powers up via USB-C (works with power banks/solar chargers).✔ IPX5 Waterproof – Resistant to rain, splashes, and outdoor humidity.✔ Magnetic Base + Hanging Hook – Attach to tents, metal surfaces, or backpacks.✔ Dimmable Brightness – Adjust from 100-5000 lumens for energy-saving or max visibility.✔ Emergency Ready – Includes SOS strobe and red night vision mode.✔ Rugged & Compact – Shockproof design fits in any gear bag. Ideal for: Camping, fishing, blackouts, hurricanes, car repairs, and survival kits. Package List: 1 * LED lamp 1 * Type-C charging cable   Notice: 1.In order to ensure the service life of the product, please minimize the collision and friction. 2.The product has its own waterproof function, which can prevent normal water droplet spraying, and has a built-in rechargeable battery.  

Read more less

SPECIFICATIONS Installation Method: Self-Contained Is Bulbs Included: No Item Type: Stage Lighting Effect Luminous Flux: <60 Model Number: 7007 Occasion: Home Entertainment Power (W): 15W Power Source: DC Style: Mini Voltage: 90-240V Description: Turn any space into a pulsing dance floor with this multifunctional Party Lights DJ Disco Ball! Perfect for birthdays, weddings, Christmas, bars, karaoke nights, or club-style events, this dynamic light projector combines rotating disco ball effects, vibrant laser patterns, and sound-activated sync to electrify your party. With 360° coverage and 16+ color modes, it creates a strobe, flash, or smooth gradient ambiance to match the beat of your music. Feature: ✔ All-in-One Party Lighting – Projects disco ball reflections + laser patterns (dots/stars/waves) for immersive effects.✔ Sound-Activated & Music Sync – Automatically changes colors/patterns with bass and rhythm (adjustable sensitivity).✔ 16+ Dynamic Modes – Switch between strobe, fade, flash, or smooth transitions via remote control.✔ 360° Rotation – Covers entire rooms with dazzling light beams.✔ Compact & Portable – Easy to mount on ceilings, tripods, or tabletops.✔ Built-in Timer (1/3/6H) – Auto-shutoff for energy saving. 🎉 Perfect For: House parties & nightclub vibes Wedding dance floors Christmas/New Year celebrations Karaoke bars & stage performances Birthday/graduation surprises

Read more less

SPECIFICATIONS Base Type: E27 Body Material: Wood Color: Ivory Features: wood wall led lamps Installation Method: Assembly Installation Type: Wall Mounted Is Bulbs Included: Yes Is Dimmable: No Is Smart Device: No Item Type: Wall Lamps Light Source: LED bulbs Lighting Area: 3-5square meters Luminous Flux: 60-249 Material: Metal Model Number: 241207 wall lights Number of light sources: 1 Power Source: AC Shade Direction: Up & Down Shade Type: Frosted Glass Style: Vintage Switch Type: Knob switch Technics: Plated Use: Daily Lighting Voltage: 220 V,90 - 260 V is_customized: Yes wall sconce: wall led sconce Material:Metal+acrylic lampshade,F style glass lampshade Bulbs Base: E27 Description: Modern Indoor Wall Light Lamp – Elevate your home’s ambiance with this stylish wooden vintage LED wall lamp, designed to add warmth and sophistication to any space. Perfect for bedrooms, bedside lighting, living rooms, hallways, and entryways, this fixture combines rustic charm with modern functionality. The soft, energy-efficient LED glow creates a cozy atmosphere, making it ideal for relaxation and accent lighting. Features: 🌿 Elegant Wooden & Vintage Design – Natural wood finish with a timeless aesthetic for a rustic yet modern look.💡 Energy-Saving LED – Long-lasting brightness with low power consumption (warm white/cool white options available).✨ Soft & Eye-Friendly Lighting – Dimmable options for adjustable brightness to suit any mood.🛏️ Perfect for Bedside & Ambient Lighting – Compact yet bright enough for reading or creating a relaxing atmosphere.🔧 Easy Installation – Simple wall-mount design with all necessary hardware included.🏡 Versatile Placement – Complements bedrooms, living rooms, corridors, and even cafes or boutique spaces.🌙 Modern Yet Cozy – Adds a touch of nature-inspired decor while providing functional illumination. Package: 1pcs*wall lamp

Read more less

SPECIFICATIONS Choice: yes Item Type: Atmosphere lamp Item Weight: 0.6 Material: ABS Model Name: car dynamic devil eyes lights Special Features: Remote Control Voltage: 12V Size: 3 Inch Voltage: 12V Power supply: Wire power supply(The red wire connects to the positive , the black wire connects to the negative Description: Upgrade your ride with these eye-catching Devil Eye & Eagle Eye LED Car Headlights, designed to give your vehicle a fierce, customized look. Featuring dynamic LED illumination, these headlights create a striking halo or demon eye effect, perfect for car enthusiasts who want to stand out. The high-intensity LEDs ensure bright, long-lasting visibility, while the sleek, aggressive design adds a sporty or futuristic vibe to your car’s front end. Easy to install and compatible with most car models, these modified headlights are ideal for show cars, tuner builds, or night-driving style. Turn heads on the road with this bold automotive upgrade! Features: 1. Material: Eye LED lights are made of ABS material, which is good and ensures performance even in bad weather. 2. Remote control: 33 low light modes control the atmosphere in the car! Use the remote control to simply switch colors and patterns in real time, and show your mood and style anytime and anywhere. 3. Devil eye lights on the car: These eyeball headlights have an eye-catching demon effect, which makes everyone on the road charming and impressive when flashing. 4. Simple installation: Eye LED lights can be installed on various vehicles such as SUVs, cars, trucks, motorcycles, etc. 5. Applicable plots: demon eye headlights can be used for small cars, trucks, and are suitable for various vehicle sizes. They can be used for birthdays, restaurants, shops, cars, roadside stands, parties, concerts, wedding decorations, etc. immediately. Note: You can change the animation mode freely (33 modes can choose) Package Included: 1/2pcs Car Devil Eyes Lights  

Read more less