Unique Gifts

Features1. Comes with SIM8202G-M2 core module, based on Qualcomm snapdragon X55 platform, supports 5G NSA and SA networking, supports multi-mode multi-band 2. Multi-constellation dual-band positioning: GPS, Beidou, Glonass, Galileo, and QZSS 3. Operating system support: Windows/Linux/Android 4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication 5. Standard M.2 B KEY slot, compatible with different 5G modules: SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 series 6. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino 7. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply 8. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status 9. 4x SMA to IPEX antenna connectors, with pre-soldered SMA terminals for connecting antennas 10. 2x SIM card slot, dual card single standby, switchable via AT command 11. Onboard audio jack and audio decoder, allows audio operation like making phone call 12. High efficiency power supply circuit, up to 3A output currentSpecificationsFrequency band: 1. Sub-6G (SA): n1, n2, n3, n5, n7, n8, n12, n20, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 2. Sub-6G (NSA): n41, n77, n78, n79 3. LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 4. LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48 5. WCDMA: B1, B2, B3, B4, B5, B8 6. GNSS: GPS, GLONASS, Beidou, Galileo, and QZSS Data rate 1. Sub-6G: 2.4 Gbps (DL) / 500 Mbps (UL) 2. LTE: 1 Gbps (DL) / 200 Mbps (UL) 3. HSPA+: 42 Mbps (DL) / 5.76 Mbps (UL) Software functions 1. Operating systems: Windows/Linux/Android 2. Communication protocols: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0 3. SMS: Supports MT, MO, CB, Text, PDU 4. Firmware upgrade: Supports firmware upgrade via USB port Applications 1. Applicable regions: Regions with 5G Sub-6G signal coverage including China, US, Japan, South Kor, Europe, the Middle East, Latin America, etc. 2. Application examples: CPE, Smart gateway, Drone, Live streaming, Remote treatment, Intelligent securityPackage List1. M.2 TO 4G/5G HAT x1 2. SIM8202G-M2 x1 3. Antenna 4pcs x1 4. IPEX adapter cable 4pcs x1 5. 2 x 20PIN pin header x1 6. Passive GPS antenna x1 7. Dual plug USB3.0 cable x1 8. USB 3.0 adapter x1 9. USB 2.0 adapter x1 10. SMA protective cap 4pcs x1 11. Screws pack x1Specification: Package Weight One Package Weight 0.34kgs / 0.74lb One Package Size 20cm * 16cm * 4cm / 7.87inch * 6.3inch * 1.57inch Qty per Carton 40 Carton Weight 11.00kgs / 24.25lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 40 pcs = 22640 pcs40HQ: 1314 cartons * 40 pcs = 52560 pcs

Read more less

featureThe device is standardized and accurate and easy to read. Digital displays are fast and easy to read.Product specifications1. Apply sugarSodium chloride NaClsalinitysalinityproportionRefractive index2. Measurement range:Salinity: 0.0~28.0%Salinity: 0~280‰Proportion: 1.000~1.217Refractive index: 1.3330-1.4200nD3. Salt absorptionSalinity: 0.1%Salinity: 1‰Specific gravity: 0.001Refractive index: 0.0001nD4. AccuracySalinity: ±0.2%Salinity: ±2‰Specific gravity: ±0.002Refractive index: ±0.0003nDSpecification: Package Weight One Package Weight 0.34kgs / 0.75lb One Package Size 17cm * 10.5cm * 5cm / 6.69inch * 4.13inch * 1.97inch Qty per Carton 88 Carton Weight 30.00kgs / 66.14lb Carton Size 75cm * 46cm * 22cm / 29.53inch * 18.11inch * 8.66inch Loading Container 20GP: 351 cartons * 88 pcs = 30888 pcs40HQ: 815 cartons * 88 pcs = 71720 pcs

Read more less

Add instant glamour and sophistication to your space with this large silver sparkly crystal vanity mirror. Surrounded by dazzling crushed diamond rhinestones, this frameless wall mirror delivers a luxurious, eye-catching look while enhancing light reflection and visual depth. Its elegant design blends seamlessly with modern, contemporary and luxury interior styles, making it a stunning focal point in any room. Crafted with a 5mm HD silver mirror and a premium MDF backboard, this wall-mounted dressing mirror offers a clear, distortion-free reflection for daily grooming or décor enhancement. The generously sized mirror surface brightens rooms and creates the illusion of more space, making it ideal for bedrooms, bathrooms, hallways, living rooms, hotels and dressing areas. Key Features Luxury crushed diamond rhinestone design for a glamorous look High-definition 5mm silver mirror with clear, distortion-free reflection Large reflective surface enhances light and visual space Anti-rust, waterproof and anti-mould construction Smooth, polished edges for added safety Easy wall mounting with reinforced D-ring hooks Suitable for home, hotel, salon and commercial use Secure packaging tested to prevent damage during transit Specifications Product Type: Wall Mounted Vanity / Decorative Mirror Material: 5mm HD Silver Mirror + MDF Backboard Colour: Silver Product Dimensions: 1200 × 600 mm / 47.2 × 23.6 inches Thickness: 2.8 cm / 1.1 inch Net Weight: 16.4 kg / 36.2 lbs Package Size: 136.5 × 70 × 10 cm Shipping Weight: 19.2 kg / 42.3 lbs Mounting Type: Wall Mounted Perfect for elevating both residential and commercial interiors, this silver crystal vanity mirror combines stunning luxury with reliable craftsmanship. Easy to install and designed to last, it’s an ideal choice for anyone looking to add elegance, brightness and refined style to their space with confidence.

Read more less

Bring hotel-style luxury into your bathroom with this elegant oval LED illuminated mirror, finished with a sleek gold aluminium frame. Designed to combine modern aesthetics with everyday practicality, this mirror enhances your space with soft ambient lighting while providing a clear, distortion-free reflection. Its refined oval shape and slim profile make it a perfect statement piece for contemporary bathrooms, dressing rooms or vanity areas. Equipped with advanced LED technology, this illuminated bathroom mirror features three adjustable light colours - warm, neutral and cool white - to suit different moods and tasks. The built-in demister pad ensures a fog-free surface even after hot showers, while the memory function conveniently saves your last lighting preference for effortless daily use. Key Features Luxury oval LED bathroom mirror with gold aluminium alloy frame Built-in LED illumination with three colour modes: warm, neutral and white Memory function retains last-used light setting Integrated demister pad for clear, fog-free reflection Smooth sanded edges for safety and refined finish Energy-efficient LED light strip with bright, even illumination Wall-mounted design suitable for bathrooms and vanity spaces Specifications Type: LED Bathroom Mirror Model: Illuminated Bathroom Mirror Shape: Oval Frame Material: Aluminium Alloy Mirror Material: Glass Frame Colour: Gold Features: Defog (Demister), Memory Function, 3 Light Colours Lighting & Power Lumen Output: 4800 lm Power: 20W (UK/EU/AU) Output Power: 12V Input Voltage: 110V–220V Lighting Colours: White / Warm / Neutral Colour Temperature: 3000K / 4500K / 15000K Inner LED Strip Length: 2 meters Power Cable Colour: White Dimensions & Weight Product Size: 50 × 80 cm (19.68 × 31.49 in) Thickness: 4 cm (1.57 in) Demister Pad Size: 200 × 300 mm (7.87 × 11.81 in) Net Weight: 6.75 kg (14.88 lbs) Load Bearing Capacity: 30 kg Stylish, functional and thoughtfully engineered, this luxury oval LED bathroom mirror offers the perfect balance of elegance and innovation. From its adjustable lighting and fog-free performance to its premium gold frame, it is an ideal upgrade for modern bathrooms seeking both beauty and everyday convenience.

Read more less

Bring both comfort and organization to your entryway with this stylish shoe storage bench. Designed with a modern farmhouse aesthetic and rustic wood grain finish, it blends effortlessly into hallways, bedrooms, and closets while keeping footwear neatly stored and easy to access. Featuring a high-density padded seat cushion, this bench provides a comfortable place to sit while putting on or removing shoes. The flip-top hidden storage compartment offers extra space for scarves, bags or everyday essentials, making it a practical and elegant solution for clutter-free living. Key Features Flip-top hidden storage compartments for discreet organization 2-tier shoe rack design with a tall 14.9" boot cubby Comfortable high-density padded seat cushion Durable engineered wood construction for long-term use Premium metal hardware enhances stability and strength Modern farmhouse style with rustic wood grain finish Multipurpose use as an entryway bench, shoe rack or closet bench Easy, tool-friendly assembly with clear instructions Specifications Overall Size: 39.3" x 11.8" x 22.4" (100 x 30 x 57 cm) Colour Options: Brown / White Material: Engineered Wood, Sponge, Fabric This shoe storage bench combines seating comfort, smart storage and timeless design into one versatile piece of furniture. Perfect for busy entryways or compact spaces, it helps keep your home tidy while adding a warm, welcoming touch to your décor.

Read more less

SPECIFICATIONS Active Noise-Cancellation: Yes Battery Capacity[mAh]: 1000 Battery life up to[hours]: 100H Bluetooth Version: 5.3 Category: Earphones & Headphones Certification: CE,FCC Choice: yes Codecs: AAC Communication: WireLess Control Button: Yes Driver Diameter: 40 Features: Waterproof,With microphone,Active Noice Cancelling,Dual Connection Frequency Response Range: 20 - 20000 High-concerned chemical: None Impedance Range: from 33 to 100 Ω Line Length: 1.5 Material: Plastic Package List: User Manual,Charging Cable,USB Type-C Adapter Plug Type: Line Type Resistance: 32 Sensitivity: 98 Sound Isolating: Yes Style: Wired in-ear headphones Vocalism Principle: Dynamic Volume Control: Yes Waterproof: Yes Wireless Type: Bluetooth With Microphone: Yes

Read more less

Indulge in everyday luxury with this generously sized recliner chair, designed to deliver exceptional comfort and support for your home theatre or living space. Featuring three reclining positions at 90°, 120° and 160°, it’s perfect for sitting upright, watching TV, or enjoying a relaxing afternoon snooze. The plush padded cushions and supportive lumbar design ensure long-lasting comfort, while the robust metal frame provides reliable durability. Upholstered in your choice of soft faux leather or breathable linen fabric, this recliner blends elegance with practicality. A handy side storage pocket keeps essentials like remotes, magazines or e-readers within easy reach, while anti-slip foot pads offer stability on all floor types. With its spacious dimensions and high weight capacity, this recliner is built for comfort, relaxation and everyday use. Key Features 3-Position Reclining Design: Adjustable backrest with 90°, 120° and 160° positions Comfortable Upholstery: Available in faux leather or breathable linen fabric Lumbar & Padded Support: Soft, resilient cushions for enhanced comfort Sturdy Construction: Durable metal frame for long-lasting support Convenient Side Pocket: Ideal for storing remotes, books or magazines Anti-Slip Foot Pads: Ensures stability and protects flooring Multi-Use Design: Suitable for living rooms, bedrooms, home theatres, hotels and lounges Specifications Product Type: Recliner Chair Reclining Angles: 90° / 120° / 160° Frame Material: Metal Upholstery Options: Faux Leather / Breathable Linen Fabric Seated Dimensions: 106 × 81 × 68 cm (H × D × W) Fully Extended Dimensions: 82 × 152 × 68 cm (H × L × W) Weight Capacity: Up to 150 kg Additional Features: Side storage pocket, anti-slip foot pads Whether you’re enjoying a movie night, reading or simply unwinding, this recliner chair offers the perfect balance of comfort, functionality and style. Its adjustable reclining positions, supportive padding and thoughtful details make it an ideal addition to any modern home or leisure space. Please note we are currently unable to deliver to Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands and Northern Ireland.

Read more less

Add timeless style and everyday comfort to your space with this Set of 4 DELUXE Retro Dining Chairs. Designed with a classic mid-century aesthetic, these armless chairs combine a sleek polypropylene shell with sturdy wooden legs and a soft padded seat for a perfect balance of form and function. Crafted from high-quality polypropylene plastic with a smooth matte finish, these chairs are durable, easy to clean and suitable for daily use. The ergonomic curved backrest supports your spine, while the cushioned seat pad provides lasting comfort whether you’re dining, working or relaxing. Thanks to their versatile design, these chairs effortlessly complement a wide range of interiors - from modern and minimalist to retro and Scandinavian-inspired spaces. Ideal for dining rooms, kitchens, lounges, bedrooms, offices or conservatories, these chairs are both practical and stylish, making them a smart addition to any home or workspace. Key Features Stylish Retro Design: Mid-century inspired look with a modern matte finish Comfortable Seating: Ergonomic curved backrest with a soft cushion pad Sturdy Construction: Strong wooden legs with reinforced PP backrest Easy to Clean: High-quality polypropylene shell and faux leather cushion Versatile Use: Suitable for dining rooms, lounges, offices, bedrooms and more Floor Protection: Non-slip leg pads reduce noise and prevent floor scratches Easy Assembly: Tools and instruction leaflet included Specifications Product Type: Dining Chair Set Set Includes: 4 Chairs Material: HQ Polypropylene Plastic, Wooden Legs, Faux Leather Cushion Finish: Matte Seat Height: 46 cm Overall Dimensions (per chair): 56.5 cm (L) × 49 cm (W) × 82 cm (H) Seat Area: 48 × 42 cm Backrest Height: 40 cm Weight Capacity: 120 kg Chair Weight: 4 kg Available ColoursBlack / Grey / White / Orange / Yellow / Red / Green / Pink / Blue / Brown Delivery NoticePlease note we are currently unable to deliver this product to the Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands and Northern Ireland. A perfect blend of comfort, durability and retro elegance, this Set of 4 DELUXE Dining Chairs is designed to elevate both your home and office interiors with effortless style.

Read more less

Add modern comfort and style to your kitchen or bar area with this set of 2 backless saddle bar stools. Designed with a gently curved saddle seat, these stools provide ergonomic support while maintaining a sleek, minimalist profile that fits neatly under counters when not in use. The clean lines and contemporary look make them a versatile addition to both modern and classic interiors. Crafted with a sturdy metal frame and upholstered in durable PU leather, these counter stools are built for everyday use. The smooth, easy-to-clean surface makes maintenance effortless, while the compact 61cm counter height is ideal for kitchen islands, breakfast bars, cafés and home bars. Simple to assemble and practical in design, they offer a perfect balance of comfort, durability and style. Key Features Set of 2 backless saddle-style bar stools Ergonomic curved seat cushion for added comfort Upholstered in durable, easy-care PU leather Strong and stable metal frame construction Modern and stylish design suitable for various spaces Compact counter height, ideal for kitchen islands and bars Easy to assemble with simple structure Specifications Colour Options: Black / Brown / Gray / White Material: PU leather, metal Size: 50 × 32 × 61 cm (19.7" × 12.6" × 24") Seat Type: Backless saddle seat Height Type: Counter height Package Includes 2 × Bar Stools With their modern saddle design, durable materials and compact counter-height build, these backless bar stools are a smart and stylish seating solution for kitchens, bars and dining spaces. Whether used for daily meals or casual entertaining, they deliver comfort, stability and contemporary appeal in one practical set.

Read more less

Looking for high-quality blank greeting cards in bulk? This 1,000 pack of 6x6 white card blanks and envelopes is perfect for trade buyers, professional printers, and craft businesses who need a premium, large-scale supply of 300gsm card blanks. Each pre-creased card blank is made from thick, durable 300gsm crisp white cardstock, ideal for printing, embellishing, and custom card making. The included 100gsm white envelopes provide a professional finish, making this set perfect for greeting cards, wedding invitations, and commercial printing. Why Choose This Bulk Pack? ✔️ 1,000 Blank Greeting Cards & Envelopes – Perfect for bulk buyers & businesses✔️ High-Quality 300gsm Cardstock – Sturdy, professional-grade thickness✔️ Pre-Creased for Efficiency – Clean folds save time & improve workflow✔️ Compatible with Inkjet & Laser Printing* – Ideal for printing or drawing✔️ Great for Foiling, Stamping & Die-Cutting – Versatile for craft & commercial use✔️ 100gsm White Envelopes Included – Premium quality for a professional finish *Printing compatibility varies by printer. We recommend testing before bulk printing. Product Specifications: 📌 Card Blanks: Colour: White Quantity: 1,000 Size (Flat): 149 x 298mm (5.87 x 11.73 inches) Size (Folded): 149 x 149mm (5.87 x 5.87 inches) Weight: 300gsm Finish: Pre-Creased for easy folding Printing: Compatible with inkjet, laser & copier printers* Manufactured in the United Kingdom 📌 Envelopes: Colour: White Quantity: 1,000 Size: 155 x 155mm (6.10 x 6.10 inches) Weight: 100gsm Flap: Diamond Gummed Printing: Compatible with inkjet, laser & copier printers* Manufactured in the United Kingdom Ideal for trade buyers, greeting card printers, and craft businesses, this wholesale pack of blank greeting cards is designed for professional use, offering outstanding quality at a cost-effective price.

Read more less

Create a warm and inviting dining space with this modern farmhouse square dining table, designed for comfort, durability and everyday living. Finished in a classic grey wood grain, it delivers a cosy countryside charm while blending effortlessly with both modern and traditional interiors. With its compact 31.5-inch square design, this table comfortably seats up to four people, making it ideal for apartments, kitchens, dining rooms or smaller homes. The size encourages closer conversation and a more intimate dining experience - perfect for family meals or casual gatherings with friends. Beyond mealtimes, this versatile table works beautifully as a breakfast table, coffee table, board game station, or casual workspace, adapting easily to your lifestyle needs. Built to last, the thick tabletop is waterproof, scratch-resistant and easy to clean, while the heavy-duty pedestal base offers excellent stability and supports substantial weight without wobbling. It’s designed for frequent daily use while maintaining its stylish appearance. Assembly is simple and stress-free, with clearly labelled parts, included hardware and easy-to-follow instructions, so you can enjoy your new table without hassle. Key Features Rustic grey wood finish with farmhouse charm Square tabletop ideal for seating four people Space-saving design perfect for small rooms Strong pedestal base for enhanced stability Durable, easy-care surface for everyday use Suitable for dining, coffee breaks, games or work A practical yet stylish centrepiece that makes every meal feel a little more special.

Read more less

This versatile Professional Makeup Train Case is perfect for both personal and professional use, offering a spacious and organized solution for storing your cosmetics, skincare products and nail polish. Featuring four detachable and customizable modules, the top layer acts as a removable suitcase-style compartment with a sponge handle for comfortable carrying. Three adjustable trays with sponge dividers allow you to neatly organize items of various sizes, making it ideal for makeup artists, beauty enthusiasts, or anyone who loves keeping their cosmetics in order. Designed for convenience, this rolling makeup case is equipped with smooth-rolling wheels, allowing for easy transport wherever you go. Whether you're traveling, using it at home, or taking it to school, this professional trolley organizer ensures your beauty essentials are secure, accessible and stylishly stored. Key Features Four Detachable Modules: Customizable compartments for efficient organization. Removable Top Compartment: Suitcase-style with sponge handle for easy carrying. Adjustable Trays with Dividers: Store cosmetics, skincare, and nail polish of all sizes. Smooth-Rolling Wheels: Effortless mobility for travel and daily use. Durable Construction: Sturdy design ensures long-lasting performance. Specifications Dimensions: 61 × 38.5 × 31 cm (24 × 15 × 12 in) Weight: 7.1 kg (15.7 lb) Material: High-quality, durable ABS and metal components Use: Makeup, skincare, nail polish, travel, home, school Keep your cosmetics perfectly organized and easily transportable with this Professional Makeup Train Case on Wheels, combining practicality, style and durability in one essential beauty accessory.

Read more less

Designed to enhance modern bedrooms, this LED bedside table combines sleek storage with ambient lighting for both style and functionality. Happening to accommodate everyday bedside essentials, its two spacious drawers provide convenient storage while the built-in LED lighting creates a soft, customizable glow ideal for relaxing evenings and night-time use. Featuring smart app control, this modern nightstand allows you to adjust lighting effortlessly with 16 colour options and a timer switch to suit your mood or routine. Available in white, black, or grey finishes, it blends seamlessly with contemporary décor while adding a modern tech-forward touch to your sleeping space. Key Features 52 x 49 x 35cm Built-in LED lighting with 16 colour options Smart app control for easy lighting adjustment Timer switch for automated on/off settings Two drawers for practical bedside storage Modern design suitable for contemporary bedrooms Available in white, black and grey colour options A perfect blend of storage and atmosphere, this LED bedside table brings modern convenience and stylish lighting to your bedroom.

Read more less

Power Source:ACFeatures:Modern Ceiling Fan Crystal ChandelierBody Material:PLASTIC,Aluminum,ABS,CrystalSwitch Type:Remote ControlNumber of Lights:>8Light Source:LED Bulbs1. Fan leaf material: Acrylic2. Voltage: 220V3. Color rendering index: greater than 704. Appearance process: crystal5. Can dimming: can6. Expanded diameter:108cm7.Weight: about 12kgSpecification: Package Weight One Package Weight 14.20kgs / 31.31lb One Package Size 55cm * 55cm * 39cm / 21.65inch * 21.65inch * 15.35inch Qty per Carton 1 Carton Weight 15.50kgs / 34.17lb Carton Size 57cm * 57cm * 41cm / 22.44inch * 22.44inch * 16.14inch Loading Container 20GP: 200 cartons * 1 pcs = 200 pcs40HQ: 464 cartons * 1 pcs = 464 pcs

Read more less

1. Fan like 3D hologram LED display, very creative 2. Connects the LED display via WiFi, control the display from App or remote control 3. Display Resolution: 512 x 512 Pixels 4. Support JPG, GIF, MP4, AVI, RMVB, MPEG, etc format 5. Less than 18W power consumption 6. App language: Chinese / English onlySpecification: General Sheathing Material Metal Product Size 46.9*9.5*6.5cm Weight 510g Package Weight One Package Weight 2.20kgs / 4.85lb One Package Size 57cm * 18cm * 20cm / 22.44inch * 7.09inch * 7.87inch Qty per Carton 5 Carton Weight 8.80kgs / 19.40lb Carton Size 62cm * 42cm * 42cm / 24.41inch * 16.54inch * 16.54inch Loading Container 20GP: 243 cartons * 5 pcs = 1215 pcs40HQ: 566 cartons * 5 pcs = 2830 pcs

Read more less

Collapsible Transparent Storage Box with Lid & Wheels - Multi-Layer Portable Organizer Bin Maximize your space with this collapsible transparent storage box, designed for versatile and convenient organization. Featuring a clear design for easy visibility, secure lid and built-in pulley wheels, this storage bin is perfect for organizing clothes, toys, office supplies or household items. Available in 1, 2 or 3 stackable layers, it’s ideal for home, dorm, closet or office use. When not in use, simply fold it down to save space. Durable, portable and easy to access - this is the smart solution for tidy living. Feature: On wheels Material: Plastic

Read more less

Bring the party anywhere with the TRIBIT StormBox Blast 2 Bluetooth Speaker, delivering a massive 200W of power with an 80W subwoofer, dual mid-range drivers, and crisp tweeters for explosive bass and immersive 2.1 channel stereo sound. With 30 hours of nonstop playtime, a built-in power bank, and cutting-edge Bluetooth 5.4, this portable party speaker ensures uninterrupted beats wherever you go. Designed for fun and durability, the StormBox Blast 2 offers customizable dynamic LED lighting, a built-in karaoke mode with mic support, and seamless TWS pairing for even bigger sound. With its rugged IP67 waterproof rating, it’s perfect for pool parties, outdoor adventures, and family gatherings. Key Features 200W output with subwoofer + dual amplifiers Karaoke mode with wired/wireless mic input 30H playtime + built-in power bank RGB dynamic lighting synced to music Bluetooth 5.4 with TWS pairing Rugged IP67 waterproof design Get ready to power your party anywhere with deep bass, vibrant lights and all-day energy.

Read more less

1. Fan like 3D hologram LED display, very creative 2. Display resolution: 450 x 224 Pixels 3. Support GIF, MP4, JPG format 4. Less than 12W power consumption 5. Play: rotate the displaySpecification: General Lamp Beads(pcs) 224 LEDs Material ABS Voltage (V) AC 100-240V Product Size 42*13*11cm Package Weight One Package Weight 1.70kgs / 3.75lb One Package Size 52cm * 15cm * 20cm / 20.47inch * 5.91inch * 7.87inch Qty per Carton 6 Carton Weight 10.50kgs / 23.15lb Carton Size 62cm * 42cm * 42cm / 24.41inch * 16.54inch * 16.54inch Loading Container 20GP: 243 cartons * 6 pcs = 1458 pcs40HQ: 566 cartons * 6 pcs = 3396 pcs

Read more less

1. Fan like 3D hologram LED display, very creative 2. Connects the LED display via WiFi, control the display from App or remote control 3. Display Resolution: 512 x 512 Pixels 4. Support JPG, GIF, MP4, AVI, RMVB, MPEG, etc format 5. Less than 18W power consumption 6. App language: Chinese / English onlySpecification: General Sheathing Material Acrylic, Metal Product Size 51.2*51.2*9.7cm Weight 2616g Package Weight One Package Weight 5.20kgs / 11.46lb One Package Size 58.2cm * 57.3cm * 17.3cm / 22.91inch * 22.56inch * 6.81inch Qty per Carton 2 Carton Weight 11.00kgs / 24.25lb Carton Size 61cm * 60cm * 37cm / 24.02inch * 23.62inch * 14.57inch Loading Container 20GP: 196 cartons * 2 pcs = 392 pcs40HQ: 457 cartons * 2 pcs = 914 pcs

Read more less

Elevate your outdoor space with the Smart Wall Light, a modern, colourful LED lamp designed for porches, patios and festive decorations. Crafted with durable iron and featuring a sleek black finish, this wall light is both stylish and built to withstand the elements with an IP65 waterproof rating. Easily control vibrant RGB lighting effects and brightness levels via the Tuya Smart app or included remote control, making it perfect for holiday parties, outdoor gatherings, or everyday ambiance. Available in multiple sizes ranging from 9W to 60W, this energy-efficient LED lamp delivers bright illumination (up to 2000 lumens) with a lifespan exceeding 50,000 hours. Its wide voltage compatibility (AC 85-265V) ensures reliable operation worldwide, while the dimmable function allows you to customize lighting moods effortlessly. Installation is simple with a self-contained design, making this smart wall light a versatile and intelligent choice for modern home lighting. Key Features Smart Control: RGB colours adjustable via Tuya app or remote control Durable Construction: Iron body with IP65 waterproof rating for outdoor use Multiple Sizes & Power: From 9W to 60W to fit any space or need Bright LED Lighting: Up to 2000 lumens with long lifespan over 50,000 hours Dimmable Function: Customize brightness and colour moods easily Wide Voltage Range: Compatible with AC 85-265V power sources Modern Black Finish: Sleek, contemporary style for any exterior décor Easy Installation: Self-contained design for quick mounting Perfect for Outdoor & Holiday Use: Ideal for porches, patios, parties and decorations The Smart Wall Light combines durable construction, vibrant customizable colours, and smart app control — perfect for adding modern style and festive ambiance to your outdoor spaces.  

Read more less

Plain, highly polished and without ornament, this set is the most understated way to give a blazer a classic gilt finish. Every button goes through more than a dozen stages of making and inspection, and the design is one of the long-standing classics of the Benson & Clegg range. Made from gilding metal, the traditional alloy for military and blazer buttons, it is finished in polished gold plate. The large button is 2.0cm across and the small button 1.5cm. A single breasted set holds three large and eight small buttons, and a double breasted set six large and eight small. It suits any blazer and is a sound choice when a club or regimental crest would be out of place. Presented in a Benson & Clegg box, ready to give.

Read more less

Are you looking for a unique present? Treat yourself or someone special to this luxury bamboo sock gift box filled with fifteen pairs of our bamboo socks. Each pair is knitted from our unique breathable bamboo blend offering the subtle touch of stand out style. Featuring a reinforced heel and toe as well as hand linked seams for added comfort, no sock on the market comes close in terms of softness, fit and durability.

Read more less

Craft Resin 8L Table Top Epoxy is an ultra-clear, self-levelling coating resin designed for large dining tables, full kitchen worktops, bar tops and high-volume workshop projects. The larger 1:1 kit is ideal for wide surfaces and multiple coatings, creating a smooth, durable, high-gloss finish in thin layers up to 3 mm. Self-leveling, bubble-release formula — optimized viscosity for controlled flow, smooth leveling, and fewer defects. Easy 1:1 mix by volume — consistent results for flood coats, clear coating, and pigment-rich designs. Around 25 minutes of working time at 25°C — plan the pour sequence before mixing. Larger mixed volumes reduce the working time further. Durable finish for daily use — cures hard and scratch-resistant with a water-resistant surface that’s easy to clean. Yellowing resistance — formulated for higher yellowing resistance than standard coating grades (manufacturer statement, no test method given). Cure and heat rating — hard cure 36–48 hours at 25°C; heat resistant up to 90°C; full mechanical strength develops over about 21 days. The heat figure is a material property, not a rating for what may be set down on the surface — hot cookware goes on a trivet or mat. Low-odour — comfortable to use indoors with normal ventilation. Wear gloves: uncured resin can irritate skin and, with repeated contact, cause an allergic skin reaction. Food contact — Suitable for incidental food contact once fully cured. This does not extend to food storage, prolonged contact, cutting surfaces, drinking vessels, serving hot food or dishwasher use. Kit includes: 8L total (4L resin + 4L hardener).

Read more less

Craft Resin 6L Deep Pour Epoxy is a crystal-clear casting resin designed for medium-to-large river tables, timber projects, deep moulds, encapsulation and decorative wood castings. This versatile size is ideal for substantial home and workshop projects, supporting layers up to 5 cm deep with smooth, depth-rich, glass-like results. Up to 5 cm per layer — in wide, open moulds with good heat dissipation. Reduce to 3–4 cm in narrow or enclosed moulds, and for large projects mix in 2–3 kg batches rather than one large mass. Smooth self-leveling, bubble-release formula — optimized low-viscosity (600 cps) resin pours smoothly and helps reduce trapped bubbles. Easy, consistent mixing — simple 2:1 ratio by volume with extended working time (approximately 1 hour) for deep and large projects. Durable cure — cures in 48–72 hours (depending on temperature and mass). Full mechanical strength develops over about 21 days. Heat resistance — withstands heat up to 80°C once fully cured. This is a material property, not a guarantee against direct hot-pan contact — use a trivet for very hot items. Yellowing resistance — formulated for higher yellowing resistance than standard coating grades (manufacturer statement, no test method given). Low odour — like virtually all two-part epoxy systems, Deep Pour is not VOC-free. Work in a well-ventilated space and follow the applicable Safety Data Sheet (SDS) for full handling guidance. Do not torch Deep Pour — avoid adding external heat to a deep reactive mass. Wear gloves: uncured resin can irritate skin and, with repeated contact, cause an allergic skin reaction. Food contact — in its uncured, liquid state Deep Pour should not come into contact with food or drink. Kit includes: 6L total (4L resin + 2L hardener).

Read more less

Craft Resin 12L Deep Pour Epoxy is a crystal-clear casting resin developed for large river tables, wide wood slabs, oversized moulds and professional workshop projects. The larger-volume kit is suited to substantial castings and multiple pours, supporting layers up to 5 cm deep with smooth, durable, glass-like results. Up to 5cm per layer — in wide, open moulds with good heat dissipation. Reduce to 3–4 cm in narrow or enclosed moulds, and for large projects mix in 2–3 kg batches rather than one large mass. Smooth self-leveling, bubble-release formula — optimized low-viscosity (600 cps) resin pours smoothly and helps reduce trapped bubbles. Easy, consistent mixing — simple 2:1 ratio by volume with extended working time (approximately 1 hour) for deep and large projects. Durable cure — cures in 48–72 hours (depending on temperature and mass). Full mechanical strength develops over about 21 days. Heat resistance — withstands heat up to 80°C once fully cured. This is a material property, not a guarantee against direct hot-pan contact — use a trivet for very hot items. Yellowing resistance — formulated for higher yellowing resistance than standard coating grades (manufacturer statement, no test method given). Low odour — like virtually all two-part epoxy systems, Deep Pour is not VOC-free. Work in a well-ventilated space and follow the applicable Safety Data Sheet (SDS) for full handling guidance. Do not torch Deep Pour — avoid adding external heat to a deep reactive mass. Wear gloves: uncured resin can irritate skin and, with repeated contact, cause an allergic skin reaction. Food contact — in its uncured, liquid state Deep Pour should not come into contact with food or drink. Kit includes: 12L total (8L resin + 4L hardener).

Read more less

Craft Resin 16L Bulk Epoxy Resin is designed for resin artists, frequent makers and creative studios working on multiple craft projects and larger batches. The clear, low-viscosity two-part epoxy is ideal for creating multiple coasters, trays, moulds, decorative pieces and resin art with a glossy, transparent finish. With a simple 1:1 mix ratio, the 16L size provides a practical bulk supply for repeat projects, batch crafting, workshops and frequent resin use. Made for Art Coating and Creative Pieces. This is the resin to choose for coating canvas art, flat artwork and small boards, and for coasters, trays, jewellery and small craft pieces. Pour up to 6 mm per layer — a flood coat over flat artwork is usually 1–2 mm, well inside that. Easy 1:1 Mix Ratio for Beginners. Measure equal parts resin and hardener by volume, mix slowly, and pour. The simple 1:1 ratio makes this resin easy to use for beginners while still giving experienced makers reliable results. Low-Bubble, Low-Viscosity Formula. The smooth, low-viscosity formula flows easily into silicone molds, corners, and fine details. It helps air bubbles rise and release more easily, making it ideal for clean, detailed craft pours. Cure Time & Pour Depth. You’ll have around 35 minutes of working time at 25°C. The resin reaches a hard cure in 24 hours. For best results, pour up to 6 mm per layer. Low-Odour Formula. Made for home and studio use, this formula is low-odour. Always wear gloves, protect your workspace, and work in a well-ventilated area. Not for Deep Pours. This resin is made for thin creative pours. For river tables, deep molds, or flower preservation blocks, use Deep Pour resin. For large tabletops or heavy protective coating, use Table Top resin.

Read more less

Craft Resin 8L Clear Epoxy Resin for Arts & Crafts is designed for larger resin art projects, multiple coaster and tray sets, jewellery, moulds and repeat creative work. The low-viscosity two-part epoxy flows easily into moulds and fine details, creating a crystal clear, glossy finish that showcases colours, pigments and embedded elements. With a simple 1:1 mix ratio, the 8L size provides more resin for larger craft projects, multiple pieces and frequent use by resin artists and makers. Made for Art Coating and Creative Pieces. This is the resin to choose for coating canvas art, flat artwork and small boards, and for coasters, trays, jewellery and small craft pieces. Pour up to 6 mm per layer — a flood coat over flat artwork is usually 1–2 mm, well inside that. Easy 1:1 Mix Ratio for Beginners. Measure equal parts resin and hardener by volume, mix slowly, and pour. The simple 1:1 ratio makes this resin easy to use for beginners while still giving experienced makers reliable results. Low-Bubble, Low-Viscosity Formula. The smooth, low-viscosity formula flows easily into silicone molds, corners, and fine details. It helps air bubbles rise and release more easily, making it ideal for clean, detailed craft pours. Cure Time & Pour Depth. You’ll have around 35 minutes of working time at 25°C. The resin reaches a hard cure in 24 hours. For best results, pour up to 6 mm per layer. Low-Odour Formula. Made for home and studio use, this formula is low-odour. Always wear gloves, protect your workspace, and work in a well-ventilated area. Not for Deep Pours. This resin is made for thin creative pours. For river tables, deep molds, or flower preservation blocks, use Deep Pour resin. For large tabletops or heavy protective coating, use Table Top resin.

Read more less

Features1. Replacement LCD screen + touch screen digitizer assembly for iPad Pro 12.9 / A1584 / A1652. 2. Replace the old, broken, cracked, damaged LCD screen with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with Apple: iPad Pro 12.9 inch 2015 Types LCD Screen + Touch Screen Digitizer Assembly Size 33 * 21.8 * 0.4 cm Weight 313 g Package Weight One Package Weight 0.91kgs / 2.01lb One Package Size 40cm * 3cm * 9cm / 15.75inch * 1.18inch * 3.54inch Qty per Carton 10 Carton Weight 9.50kgs / 20.94lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 10 pcs = 3810 pcs40HQ: 885 cartons * 10 pcs = 8850 pcs

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for iPad Pro 12.9inch 4th Gen 2020 A2069 A2232 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Apple: iPad Pro 12.9 inch (2020) Package Weight One Package Weight 0.74kgs / 1.63lb One Package Size 27cm * 22cm * 2cm / 10.63inch * 8.66inch * 0.79inch Qty per Carton 30 Carton Weight 19.00kgs / 41.89lb Carton Size 50cm * 36cm * 37cm / 19.69inch * 14.17inch * 14.57inch Loading Container 20GP: 400 cartons * 30 pcs = 12000 pcs40HQ: 929 cartons * 30 pcs = 27870 pcs

Read more less

Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly for iPad Pro 12.9 inch 2021 2022 A2378 A2461 A2379. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Apple: iPad Pro 12.9 (2021) Package Weight One Package Weight 0.73kgs / 1.61lb One Package Size 40cm * 30cm * 9cm / 15.75inch * 11.81inch * 3.54inch Qty per Carton 10 Carton Weight 8.00kgs / 17.64lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 10 pcs = 3810 pcs40HQ: 885 cartons * 10 pcs = 8850 pcs

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for iPad Air 5/Air 2022 A2589 A2591 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Apple: iPad Air 2022 Package Weight One Package Weight 0.59kgs / 1.31lb One Package Size 40cm * 30cm * 9cm / 15.75inch * 11.81inch * 3.54inch Qty per Carton 10 Carton Weight 8.00kgs / 17.64lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 10 pcs = 3810 pcs40HQ: 885 cartons * 10 pcs = 8850 pcs

Read more less

LCD Screen Features1. Super Retina XDR display 2. 6.7-inch (diagonal) all-screen OLED display 3. Dynamic Island 4. ProMotion technology with adaptive refresh rates up to 120Hz 5. Always-On display 6. HDR display 7. 2796-by-1290-pixel resolution at 460 ppi 8. 2,000,000:1 contrast ratio (typical) 9. True Tone display 10. Wide color display (P3) 11. Haptic Touch 12. 1000 nits max brightness (typical) 13. 1600 nits peak brightness (HDR) 14. 2000 nits peak brightness (outdoor) Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for iPhone 14 Pro Max 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch Loading Container 20GP: 333 cartons * 40 pcs = 13320 pcs40HQ: 773 cartons * 40 pcs = 30920 pcs

Read more less

🔥 Bring a damaged iPhone 12 Pro Max display back to life with a repair-focused replacement screen.Designed for compatible iPhone 12 Pro Max repair work, this display assembly gives repairers a practical replacement option for a damaged or unusable screen.🎯 Problem → SolutionCracked, damaged or unusable display? Replace the compatible display assembly as part of your repair workflow and test it before final installation.✅ Key Benefits For compatible iPhone 12 Pro Max 6.7-inch display assembly HDR and wide-colour display support True Tone and Haptic Touch support Useful for display repair and replacement work Test before installation 🛍️ Ready for the repair? Check exact compatibility and test the screen before installation. Professional installation is recommended.📸 More Product Photos

Read more less

MIRA SALES • PREMIUM PRODUCT For iPhone 13 Pro Original LCD Screen, For iPhone 13 Pro (Original) Professional replacement display solution for the compatible model listed in the title and available variant. Designed for repair and replacement applications where the existing display or touch assembly needs replacing. ✨ PRODUCT HIGHLIGHTS 01 • FEATUREReplacement display / digitizer assembly 02 • FEATUREDesigned for the compatible model 03 • FEATURESuitable for repair work 04 • FEATURECareful connector handling recommended 🔎 PRODUCT OVERVIEW A dedicated replacement component intended to restore the display and touch assembly of the compatible device. Please confirm the exact model and variant before ordering. 📋 KEY DETAILS Compatibility: Use the exact device/model and variant shown on this page.Application: Display / digitizer replacementFormat: Product-specific design shown in the photographs. ⚠ Installation Note: Test before final installation and handle flex cables/connectors carefully. Professional installation is recommended. 📸 MORE PRODUCT PHOTOS 💡 MIRA SALES TIP Check the exact model, variant, connector and compatibility before ordering. For specialist repair components, professional installation is recommended.

Read more less

1. Strap material: silicone2. Battery capacity: 292mAh3. Positioning system: GPS/GLONASS/BeiDou/Galileo/QzSS4. Sensor: 9-axis inertial sensor (acceleration sensor/gyroscope sensor/geomagnetic sensor), optical heart rate sensor5. Bluetooth: 2.4 GHz, Bluetooth 5.2, low power Bluetooth support6. Speaker: support7. Link interface width: 20mm8. Display: size about 1.74 inches, AMOLED color screen, resolution: 336 x 480, PPI 3369. Support languages: Simplified Chinese, American English, European Spanish, European Portuguese, French, German, Russian, Italian, British English, Polish, etc.10. Strap size: width of about 20mm, fit wrist circumference of about 130-210mm11. Size: about 46 x 33.5 x 10.8mm12. Weight (without the weight of the strap): about 30gInstruction:1. The application must be downloaded through the Huawei Sports Health App watch application market, not supported when connected to iOS phones2. Bluetooth call function requires normal connection between Huawei Sports Health App and the watch to use3. Supported by Android 7.0, HarmonyOS 2 and above4. iOS phones do not support music import and watch music management function5. HarmonyOS/Android/iOS phones already support a variety of NFC traffic cards and support simulated non-encrypted access cards with a frequency of 13.56 MHz. After copying the physical access card information into Huawei's wearable device chip, the wearable device can be used as an access card. More NFC access cards can be simulated through the cell phone super access card function, and then migrated to the same account wearable device synchronously, currently supporting more than 90% of NFC access cards. iOS phones support access card function6. Need to customize the plan in Huawei Sports Health App7. Support the replacement of 20mm EasyFit strap (pink/black/blue need to purchase HUAWEI WATCH FIT Link separately; white/grey already standard with link, can directly replace the strap)8. More dials need to be downloaded from the dial market, some dials are paid dials9. Through Huawei Sports Health App, you can set the photos in your phone as album dials, and you can also set album dials conveniently and quickly through One Touch Transfer. One-touch transfer function is only supported by EMUI10.0, HarmonyOS 2 and above with NFC function.10. Smart message push function is only supported by EMUI 9.1, Harmony OS 2 and above.11. Smart voice assistant requires EMUI 10.1, HarmonyOS 2 and above version of Huawei cell phones, and install Huawei Sports Health App12. Remote photo function is only supported by EMUI 8.1, HarmonyOS 2, iOS 9.0 and above13. 7 common sports modes: outdoor running, indoor running, outdoor cycling, indoor cycling, swimming pool, open water, rope skipping14. Need to open the heart rate too high and too low alert in Huawei Sports Health AppPacking list:- Watch x 1- Charging dock (including charging cable) x 1- Quick start x 1- Safety information x 1Specification: General OS System iOS 9.0+, iOS 9.0, iOS 10, iOS 12, Android 9.1, Android 11, iOS 10.3.2, HarmonyOS 2.0, Android 12, HarmonyOS 3.0 Sensor Acceleration sensor, Gyroscope, Optical heart rate sensor, Geomagnetic sensor Network BT Yes, V5.2 Display Screen Type AMOLED Battery Standby time about 10 days Charging Power 5V 1A Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 47cm * 5cm * 2cm / 18.5inch * 1.97inch * 0.79inch Qty per Carton 160 Carton Weight 19.00kgs / 41.89lb Carton Size 49cm * 42cm * 42cm / 19.29inch * 16.54inch * 16.54inch Loading Container 20GP: 308 cartons * 160 pcs = 49280 pcs40HQ: 716 cartons * 160 pcs = 114560 pcs

Read more less

1. Powerful wireless radio system, which can achieve a wireless radio distance of up to 250 meters2. The transmitter can record, regardless of human voice, ambient sound or instrument sound, it can be recorded clearly, and it has built-in storage, which can be used as a recording pen alone, and can also back up the sound during recording to ensure the integrity of the recording data3. The charging box can quickly pair the receiver and the transmitter, and charge them in real time. It can also store some accessories in one piece. It is easy to carry and fully charged after opening the cover.4. The two transmitters can record at the same time, and have built-in storage, which can record independently, and you can use it as a recording pen; it also supports sound backup to ensure the integrity of the recording data to the greatest extent5. The transmitter adopts a clip-back design and is equipped with magnetic accessories, which can be easily fixed on clothes. The receiver can also be mounted on the cold shoe/hot shoe with the help of the hot shoe conversion plate, and the installation is very flexible6. The receiver supports USB-C, Lightning and 3.5mm TRS interface output, compatible with mainstream mobile phones, various cameras and computers7. Standard charging box (optional), with a sense of security, the charging box can charge the receiver and transmitter in real time, the battery life is up to 15 hours, and the creation is not limitedLauncher:1. Dimensions: Length 47.32mm, Width 30.43mm, Height 20.01mm2. Weight: 30g3. Wireless mode: GFSK 1 Mbps and 2 Mbps4. Operating frequency: 2400 MHz to 2483.5 MHz5. Battery type: LiPo 1S6. Battery capacity: 320mAh7. Battery power: 1.23 Wh8. Battery voltage: 3.85 volts9. Charging time: 1 hour 10 minutes10. Working time: 5.5 hoursReceiver:1. Dimensions: Length 47.44mm, Width 32.21mm, Height 17.35mm2. Weight: 24.9 grams3. Wireless mode: GFSK 1 Mbps and 2 Mbps4. Operating frequency: 2400 MHz to 2483.5 MHz5. Battery type: LiPo 1S6. Battery capacity: 320mAh7. Battery power: 1.23 Wh8. Battery voltage: 3.85 volts9. Charging time: 1 hour 10 minutes10. Working time: 5 hoursCharging case:1. Dimensions: Length 103.06mm, Width 61.87mm, Height 41.50mm2. Weight: 162.2 grams3. Battery type: LiPo 1S4. Battery capacity: 2600mAh5. Battery power: 10 Wh6. Battery voltage: 3.87 volts7. Charging time: 2 hours and 40 minutes8. Working time: 3 charges at the same time, about 1.8 times of charging9. General: microphone directivity10. Low cut off: 50 Hz to 20 kHz11. Low cut function on: 150 Hz to 20 kHz12. Sound pressure level (MAX): 114 dB SPL13. Input level (3.5mm): -17 dBV14. Equivalent noise: 23 dBA15. Output power (MAX): 22 mW@1 kHz, 32 Ω16. Transmission distance (MAX): 250 meters (FCC); 160 meters (CE) measured in an open outdoor environment without interferenceSpecification: Package Weight One Package Weight 0.21kgs / 0.47lb One Package Size 20cm * 20cm * 8cm / 7.87inch * 7.87inch * 3.15inch Qty per Carton 226 Carton Weight 47.01kgs / 103.63lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 226 pcs = 40002 pcs40HQ: 412 cartons * 226 pcs = 93112 pcs

Read more less

1. It can heat up instantly, just pick it up and use it 2. Electric heating elements are cheap and of good quality, requiring only a small expenditure each year 3. Hang up and hibernate immediately 4. The user can set the sleep temperature 5. Small solder joints can be soldered 6. The two handles work completely independently, and different welding heads can be used 7. Do not use switching power supply, but use a stable and powerful traditional transformerSpecification: Package Weight One Package Weight 25.85kgs / 56.99lb One Package Size 60cm * 60cm * 36cm / 23.62inch * 23.62inch * 14.17inch Qty per Carton 1 Carton Weight 26.70kgs / 58.86lb Carton Size 62cm * 62cm * 38cm / 24.41inch * 24.41inch * 14.96inch Loading Container 20GP: 182 cartons * 1 pcs = 182 pcs40HQ: 423 cartons * 1 pcs = 423 pcs

Read more less

1. The 37050 adopts a new appearance design and a new generation of optical imaging system, which makes the imaging clearer. 2. 7X-50X magnification, observation more detailed, the effect is more real. 3. With 2.0X auxiliary mirror, the maximum observation multiple can be 100 times. 4. 37050 binocular microscope 5. Microscopes are widely used in education, lab research, biology, metallurgy, engineering, chemistry, manufacturing, and in the medical, forensic science, and veterinary industries.Specification: Package Weight One Package Weight 4.62kgs / 10.19lb One Package Size 39cm * 25cm * 37cm / 15.35inch * 9.84inch * 14.57inch Qty per Carton 1 Carton Weight 5.60kgs / 12.35lb Carton Size 42cm * 27cm * 39cm / 16.54inch * 10.63inch * 15.35inch Loading Container 20GP: 602 cartons * 1 pcs = 602 pcs40HQ: 1399 cartons * 1 pcs = 1399 pcs

Read more less

1. Model: TBK-578 2. LCD freezer Machine, just connect with power, no need liquid nitrogen 3. For all phone screen, OLED cruved screen glass separation is workable as well 4. Separator temperature: -185 degree 5. New appearance design, easy to use, more convenient to separate 6. Supply : AC 110~220V 7. Power: 800W 8. Product Size: 69 x 45 x 32cm 9. Working areas: 250 x 190 mm, can use for Straight screen /curved screen /tablet screen separating 10. Intelligent temperature control 11. Mini size with touch panel 12. Fast separation by 90 secondsSpecification: General Certificate CE Package Weight One Package Weight 55.20kgs / 121.69lb One Package Size 77cm * 53cm * 50cm / 30.31inch * 20.87inch * 19.69inch Qty per Carton 1 Carton Weight 56.00kgs / 123.46lb Carton Size 80cm * 55cm * 52cm / 31.5inch * 21.65inch * 20.47inch Loading Container 20GP: 116 cartons * 1 pcs = 116 pcs40HQ: 270 cartons * 1 pcs = 270 pcs

Read more less

1. Use with laser machine 2. No noise, strong suction 3. Can filter multiple smoke 4. Smoking hood 4A paper adsorption area 5. The smoking pipe can be flexibly bent 6. Working voltage: 220V 7. Product power: 150W 8. Noise: <55db 9. Smoking pipe length: 100cm 10. Product size: 25x25x33.5cm 11. Product net weight: 9.6kgSpecification: General Certificate EMC, LVD Package Weight One Package Weight 10.69kgs / 23.56lb One Package Size 32cm * 32cm * 53cm / 12.6inch * 12.6inch * 20.87inch Qty per Carton 1 Carton Weight 8.95kgs / 19.73lb Carton Size 32cm * 32cm * 53cm / 12.6inch * 12.6inch * 20.87inch Loading Container 20GP: 491 cartons * 1 pcs = 491 pcs40HQ: 1140 cartons * 1 pcs = 1140 pcs

Read more less

1. Perfect coordination under different temperatures and air volumes. 2. Spiral wind/straight wind can be switched at any time. 3. Digital control. 4. The four-segment memory and storage functions meet the needs of daily work. 5. Super large air pump, air volume up to 200 levels of output, allowing your working range to be wider. 6. Large function display screen. 7. Unique air gun nozzle bracket. 8. Pure copper voltage transformer, high-speed heating. 9. Embedded nozzle. 8. Power: 1200W. 9. Temperature range: 100~500 celsius.Specification: General Certificate ROHS Package Weight One Package Weight 23.03kgs / 50.77lb One Package Size 71cm * 41cm * 49cm / 27.95inch * 16.14inch * 19.29inch Qty per Carton 1 Carton Weight 24.00kgs / 52.91lb Carton Size 72cm * 43cm * 73cm / 28.35inch * 16.93inch * 28.74inch Loading Container 20GP: 117 cartons * 1 pcs = 117 pcs40HQ: 273 cartons * 1 pcs = 273 pcs

Read more less

1. Intimate pen holder hole and bracket design to improve the portability of the product. 2. The leather case is made of environmentally-friendly high-quality fabric, non-slip, wear-resistant and dirt-resistant. 3. 1080P+HDR can bring more light and dark details to the picture, the contrast and layering are improved, and the sharpness, brightness and color are significantly improved. 4. 178-degree wide viewing angle, from the front and side, the color is also full. 5. No splash screen technology to reduce the harmful blue light effect and improve viewing comfort. 6. Full-featured Type-C interface, support for power supply, signal transmission, first-line connection to screencast movies, play games, one line to achieve laptop split screen / mobile screen cast (two mode switch). 7. Adapt to a variety of game consoles, suitable for game consoles such as PS4/XBOX ONE/Switch. 8. 9.5mm slim body, not only can be placed on the bed to play games, watch movies, but also to travel, travel. Specification: 1. Screen size: 15.6 inches. 2. The best resolution: 1920RGBx1080P. 3. Screen ratio: 16:9 (widescreen). 4. HD standard: 1080P (Full HD). 5. Panel type: IPS full view. 6. Backlight type: W-LED backlight. 7. Product size: 356x224x9mm 8. Product weight: 746 grams (without leather case).Specification: Package Weight One Package Weight 1.18kgs / 2.59lb One Package Size 40cm * 27cm * 8cm / 15.75inch * 10.63inch * 3.15inch Qty per Carton 10 Carton Weight 12.10kgs / 26.68lb Carton Size 42cm * 56cm * 42cm / 16.54inch * 22.05inch * 16.54inch Loading Container 20GP: 269 cartons * 10 pcs = 2690 pcs40HQ: 626 cartons * 10 pcs = 6260 pcs

Read more less