SkyRC e4S 60W 2-4S Multi-Chemistry Charger
SkyRC e4S 60W 2-4S Multi-Chemistry Charger
$23.00 不含增值税
快点!库存中仅剩 5 件商品!
-
Guaranteed secure & safe checkout.
- 有任何疑问?我们很乐意为您提供帮助
- 退货无忧,30天内可退货
随时付款
收到包裹后30天内轻松付款。
阅读更多
$23.00 不含增值税
快点!库存中仅剩 5 件商品!
Guaranteed secure & safe checkout.
收到包裹后30天内轻松付款。
阅读更多
A straightforward charging bench need not mean one charger for every battery chemistry. The SkyRC e4S combines mains power, up to 60W charging output and four selectable current settings for 2–4S LiPo, LiHV and LiFe packs, plus 6–8-cell NiMH batteries. Buttons and status LEDs handle the essentials without making charging feel like a spreadsheet exercise.
The e4S suits a bench with supported 2S–4S lithium packs and 6–8-cell NiMH packs, where selectable charging current matters more than a display full of advanced settings. Its AC input means no external DC supply is needed. It is not suitable for 1S whoop batteries or 6S flight packs, and SkyRC does not document a storage or discharge mode for this model.
Yes, 4S LiPo is within the supported range. Use the correct chemistry setting, suitable main and balance connections, and a current allowed by the battery manufacturer.
Check your battery's main and balance connections against the instruction manual before ordering. This listing does not promise an included battery lead or adapter.
No. Output is limited to 60W, and actual charging current also depends on battery voltage and the charging stage. Select a safe current, not simply the biggest number.
Storage mode is not documented in SkyRC's e4S page or manual. Choose a charger with an explicitly supported storage function if that is part of your routine.
Select battery type and current, then use the start/stop control as shown in the manual: hold for two seconds to start and short-press to stop charging. The battery-status LED blinks green while charging and remains green when complete.
Read the SkyRC e4S instruction manual before use. Charge only supported rechargeable chemistries and cell counts; do not charge non-rechargeable, damaged or defective batteries. Follow the battery manufacturer's charging limits and connect leads correctly. Never leave charging unattended. Use a safe, well-ventilated location away from moisture and excessive heat, keep charger and batteries out of children's reach, and stop immediately if abnormalities occur. A damaged AC cord must be replaced by the manufacturer, its service agent or a similarly qualified person.
Match the cell count, chemistry, charging current and leads to your packs. If your bench lives in the e4S's supported range, it covers the basics without a complicated setup ritual.
我们支持全球配送。您的订单将被精心包装,并配送至您指定的任何地点。配送时间为5-11个工作日。下单后,您将收到一封包含更多配送信息的电子邮件。
在收到包裹后30天内,您可以办理退货或换货,前提是商品须保持原包装且处于可二次销售的状态。
我们尽最大努力确保您的商品完好无损地送达。在收到包裹后的30天内,您可以办理退货或换货,前提是商品须保持原包装且处于可二次销售的状态。