SpeedyBee F405 V5 OX32 55A 30x30 Model Aircraft FC&ESC Stack

SpeedyBee F405 V5 OX32 55A 30x30 Model Aircraft FC&ESC Stack

Product form

Delivered in 4-8 days  Contact us for availability

£90.97 Incl. VAT

    • Guaranteed secure & safe checkout.

      shop pay
    • Shipped today? Order within: Jun 28, 2026 23:59:00 +0100
    • Free shipping on all orders above £50,00
    • No hassle returns, 30 days return
    Pay whenever you want

    Easily pay within 30 days after you have received your package.
    Read more

    Description

    SpeedyBee F405 V5 55A 30x30 Flight Stack

    Let's be honest, nobody enjoys crouching over a laptop in a damp field, squinting at Betaflight while your mates are ripping packs. The SpeedyBee F405 V5 Stack is your ticket out of that digital purgatory. Packing a workhorse F405 flight controller and a beefy 55A 4-in-1 ESC with shiny new OX32 firmware, this stack's party trick is full wireless tuning. Flash firmware, move motors, and tweak your PIDs all from the SpeedyBee app on your phone. It's the "it just works" upgrade you've been threatening to buy for three builds now.

    Why You Want It

    Because your time is worth more than the tangled mess of USB cables at the bottom of your flight bag. This stack is for the pilot who'd rather spend five more minutes flying than five minutes tethered to a computer. The F405 V5 board is littered with enough BECs and UARTs to power a small Death Star, and the 55A 32-bit ESC provides power so smooth it’ll make you wonder if your props are even spinning. Yes, it costs money, but think of all the fuel you'll save not driving home in a rage to fix a minor config issue.

    Flight Controller Specifications

    • MCU: STM32F405 (The reliable engine that won the war)
    • IMU (Gyro): ICM42688P
    • Bluetooth Tuning: Full-fat, connect-and-go via the SpeedyBee App
    • Blackbox: 16MB Onboard (Because you need evidence for your mates)
    • BEC 5V Output: 9 groups, 1.5A total. Enough to light up your quad like a Blackpool funfair.
    • BEC 9V Output: 2 groups, 3A total. Perfect for your power-hungry digital VTX.
    • UARTs: 6 sets. Yes, six. No more solder-pad Tetris.
    • Mounting: 30.5 x 30.5mm (The industry standard, thank goodness)
    • Weight: 8.1g (Lighter than your existential dread about the next firmware update)

    ESC Specifications

    • Firmware: OX32 (The open-source future is now, old man)
    • Continuous Current: 55A x 4
    • Burst Current: 70A x 4 (For when you absolutely, positively have to clear that tree)
    • TVS Protective Diode: Yes (Absorbs voltage spikes so your magic smoke stays inside)
    • Input Voltage: 3-6S LiPo
    • Current Sensor: Supported (Scale=27, Offset=-2644)
    • Mounting: 30.5 x 30.5mm
    • Weight: 19.1g

    What’s in the Box*

    • 1x SpeedyBee F405 V5 Flight Controller
    • 1x SpeedyBee OX32 55A 4-in-1 ESC
    • 1x 1000µF Solid Capacitor
    • 1x Bag of assorted cables, gummies, and screws that you'll probably lose

    Disclaimer

    *The colour of the silicone wires may vary, but the 55A of 'send it' power is contractually guaranteed.

    Detailed Specifications

    Specifications
    Product Name SpeedyBee F405 V5 30.5×30.5mm Model Aircraft Flight Controller
    MCU STM32F405
    IMU (Gyro) ICM42688P
    USB Port Type New Type-C interface
    Barometer SPA06-003
    OSD Chip AT7456E
    Full-featured Bluetooth Tuning Supported. Connect via SpeedyBee App for FC firmware flashing and parameter tuning.
    Wireless FC Firmware Upgrade Supported
    DJI Air Unit Connection Supports 6-pin direct plug-in or solder connection
    Blackbox Supported, built-in 16MB storage chip
    Input Voltage 3-6S LiPo battery
    Independent 5V BEC Output 9 groups (4× +5V pads on front, 1× BZ+ buzzer pad, and 4× +5V pads at the corners for external LEDs). Total output current: 1.5A.
    Independent 9V BEC Output 2 groups (1x 9V pad on front, 1x 9V output in a connector on the back). Total output current: 3A. Supports PINIO remote on/off control.
    MCU & Gyro Power Independent LDO
    3.3V Output 1 group (1× 3.3V pad on front)
    4.5V Output 3 groups (3× 4.5V pads on front). Can power receiver and GPS when FC is powered via USB. Max output current: 1A.
    ESC Signal M1-M4 pads and 10-pin connector on the back
    Servo Signal S5-S6 pads on the front
    ESC Telemetry Input Supported (UART5)
    Betaflight Camera Tuning Pad Supported (CC pad on front)
    I2C Supported (GPS connector + pads)
    UART UART1 (Bluetooth); UART2 (front pads for receiver); UART3 (DJI VTX pads + rear SH1.0-6-pin); UART4 (GPS pads + front SH1.0-6-pin); UART5 (TLM); UART6 (receiver pads + rear SH1.0-4-pin)
    ST LED Pads Supported, on front G/5V/LED pads; controlled by FC firmware
    Meteor LED Strip Pads Supported. Switch between SB-LED and ST-LED modes via BOOT button or App. In SB-LED mode, controlled by ESP32 Bluetooth chip.
    Buzzer Pads Supported
    BOOT Button [A] Hold BOOT while powering on to force DFU mode for flashing.
    [B] When powered and in standby, short-press cycles LED display modes; long-press switches SB-LED/ST-LED. In ST-LED mode, LED1–LED4 are controlled by FC firmware.
    RSSI Pads Supported
    SmartPort Not supported
    Supported FC Firmware Betaflight, INAV, Ardupilot
    Firmware Target Name SPEEDYBEEF405V5
    Factory Firmware Version Betaflight 4.5.2
    Configurator Version Betaflight 10.10.0
    Mounting Holes 30.5 × 30.5mm (Ø4mm), side opening
    Dimensions 39mm (L) × 39mm (W) × 4.9mm (H)
    Weight 8.1g
    Product Name SpeedyBee OX32 55A 30.5×30.5 4-in-1 ESC
    Default Firmware OX32
    Continuous Current 55A (per channel) / 220A (4-in-1)
    Maximum Current 70A (per channel) / 280A (4-in-1)
    TVS Protective Diode Yes (built-in)
    External Capacitor 1000µF Solid Capacitor (included in package)
    ESC/Motor Protocol DSHOT300/600
    Input Voltage 3-6S LiPo
    Power Output VBAT
    Current Sensor Supported
    ESC Telemetry Supported
    Mounting Holes 30.5 × 30.5mm (Ø4mm), side opening
    Dimensions 40.9mm (L) × 44.9mm (W) × 8.0mm (H) (incl. heatsink)
    Weight 19.1g
    ESC Webpage https://ox32.oxbot.com/
    Current Meter Note Supported (Scale=27, Offset=-2644)

    Still Here?

    Wow, a reader. We're genuinely impressed. You've scrolled past the specs, ignored the buy button, and are now deep in the SEO-padding zone. For your dedication, here's a tip: pair this with a decent GPS and you'll have the best 30x30 FPV flight stack in the UK for long-range shenanigans. Now, for the love of Bardwell, go click "Add to Basket" before your battery finishes charging.

    Pros and cons

    • Sustainably produced
    • Ideal for everyday use
    • May discolor in direct sunlight

    Returns & Delivery

    When will my order be delivered?

    We ship worldwide. Your order will be packaged really carefully and delivered wherever you want. Delivery takes between 2-4 business days. You will receive an e-mail after ordering with more information about the delivery.

    Can I return my product?

    Orders can be returned or exchanged within 30 days of receiving the parcel, providing they are in original resalable condition.

    What can I do if my item (or part of it) is damaged?

    We work hard to deliver your items without damage. Orders can be returned or exchanged within 30 days of receiving the parcel, providing they are in original resalable condition.

    Recently viewed products

      © 2026 Trand Nova. All rights reserved.  ·  Terms of Service  ·  Privacy Policy  ·  Refund Policy  ·  Shipping Policy  ·  Legal Notice

        • American Express
        • Apple Pay
        • Google Pay
        • Klarna
        • Maestro
        • Mastercard
        • PayPal
        • Shop Pay
        • USDC
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account