If you are looking for a solid, top performing motor, you need look no further. TheFPV's "The Motors" are what you're after.

The 2208 size has been specifically chosen for the higher efficiency and torque over more conventional sizes, and for the smooth yet snappy in-air feel. Whether you're after technicality or flow, you can nail it with a set of The Motors.

A hollow titanium shaft allows for maximum strength with minimum weight - a no brainier. Following this trend, 7075 aluminium was selected for the bell as this grade of aluminium is comparable in strength to steel, but is also comparably much lighter. On the inside, super-high-quality NSK bearings are used in tandem with N52SH Arc magnets and a minuscule air gap to ensure highly optimised, reliable and just plain stupid crazy fun performance. The core is made using 0.15 silicone sheet steel lamination to minimise magnetic loss, furthering the refined, meticulous nature of our efforts to make these motors worthy of being "The Motor, Full stop."

Other small features include low profile prop nuts and the motor motor bottom guards ensure the motor wires cannot get jammed into the coils or rotor during installation.

Putting all of these things together into a motor with true top tier performance for a lower than top price makes this the only motors you will ever need, hence the name; "The Motors."

To learn more, check out our full write-up of the motors

https://www.unmannedtechshop.co.uk/2019/04/11/meet-the-motors/

Key Features (TL;DR) :

• 2208 Stator Size
• Available in multiple kV variations:
  • 1650Kv - ideal for 6S (5 inch) Builds
  • 2150Kv - ideal for 5S (5 inch) Builds
  • 2400Kv - ideal for 4S (5 inch) Builds
• 7075 aluminum bell
• High-Quality NSK bearings
• N52SH Arc magnets
• Hollow Titanium shaft
• 0.15 silicone steel sheet lamination
• Low profile nuts
• "Naked Bottom" ;)
• Retaining bar to keep motor wires from rubbing against rotor
• Super sweet looks, if we do say so ourselves (and we do)

Enjoy!

-TheFPV team <3