Products

This is a little module that will fully discharge your lipo battery. This is idea if you have a bad crash and you damage your Lipo, or you have an old puffy battery. Use this device to fully discharge your lipo before disposal. Specifications Model: Lipo Killer Item Name: 0V Battery Discharger for Lipo Battery Battery Type: Compatible with Lipo Battery ( XT60 & XT30 Connector) Dischager Range: 0V Dimension: 26x16x18mm Weight: 7.8g Usage Plug your battery's XT60/ XT30 Connector into discharger's connector Then LED will keep lighting untill finishing dischage 0V LED Light goes off, which points at battery dischager to 0V. Included 1x Lipo Killer Battery Discharger

Read more less

This is a spare / replacement set of 10x2mm pins for your FTX Vantage / Carnage / Outlaw / Banzai R/C Vehicle Part Number - FTX6513

Read more less

This is a set of 10x45 plastic propellers that are ideal for most multicopters. In particular, these propellers are used for Arducopter and the Arducopter 3DR frames. These sets includes one counter clockwise and one clockwise propeller. The coloured propellers can be used to help you easily see the orientation of your multi copter/ arducopter; use different coloured propellers at the front of your flying platform to easily distinguish between the front and the rear. You have a choice of colours including green, blue, red, orange, yellow and black. CONTENTS 1x 10x45 plastic propeller clockwise rotating 1x 10x45 plastic propeller counter-clockwise rotating Set of shaft adaptors

Read more less

📦 Open-Box, new item High quality: The wood vise is made of high quality steel, corrosion resistant and durable. 2. Quick assembly: The vice for carpentry work can be easily attached to the workbench with the included clamping screw 3. Easy to use: The wood vice is easy to use. Slots in the base plate so you can attach the vise to a work table or machine table. 4. Wide Application: The carpentry vise is useful for woodworking, mechanical engineering and welding.

Read more less

Note: The current batch of Sik Telemtry Radio uses the SI1060 chip (previously SI1000) shipped with updated firmware. Older firmware without SI1060 chip support is not compatible. Please use Mission Planner 1.3.76 or QGroundControl v4.2.0 or newer if firmware upload is required. This Holybro SiK Telemetry Radio is a small, light and inexpensive open source radio platform that typically allows ranges of better than 300m "out of the box" (the range can be extended to several kilometres with the use of a patch antenna on the ground). This radio is plug-n-play all Pixhawk Standard and other Flight Controller, providing the easiest ways to setup a telemetry connection between your Autopilot and a ground station. It uses open source firmware which has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Ardupilot, QGroundControl, PX4 Autopilot. Features Open-source SIK firmware Plug-n-play for Pixhawk Standard Flight Controllers Easiest way to connect your Autopilot and Ground Station Interchangeable air and ground radio Micro-USB port (Type-C Adapter Cable Included) 6-position JST-GH connector Specification 100 mW maximum output power (adjustable) -117 dBm receive sensitivity RP-SMA connector 2-way full-duplex communication through adaptive TDM UART interface Transparent serial link MAVLink protocol framing Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle Error correction corrects up to 25% of bit errors Open-source SIK firmware Configurable through Mission Planner & APM Planner FT230X is a USB to BASIC UART IC Dimensions 28 x 53 x 10.7mm (without antenna) Electrical Data Supply voltage: 5V DC (from USB or JST-GH) Transmit current: 100 mA at 20dBm Receive current: 25 mA Serial interface: 3.3 V UART Included Radio modules with antennas *2 Micro-USB to USB-A cable *1 Micro-USB to Micro-USB OTG adapter cable *1 Micro USB to Type C Adapter JST-GH-6P to JST-GH-6P cable *1 (for Pixhawk Standard FC) JST-GH-6P to Molex DF13 6P (for Pix32, Pixhawk 2.4.6, etc.)

Read more less

1080-Piece Metric Fastener Assortment KitA comprehensive assortment of zinc-plated metric fasteners covering M3, M4, M5, and M6 sizes — everything you need for repairs, builds, and projects in one organised kit.What's Included (1080 pieces total)Phillips Round Head Screws: M3×6mm – 55pcs | M3×10mm – 55pcs | M3×14mm – 55pcs | M3×20mm – 55pcs M4×10mm – 29pcs | M4×20mm – 15pcs | M4×25mm – 11pcs | M4×30mm – 10pcs M5×10mm – 21pcs | M5×20mm – 10pcs | M5×30mm – 8pcs | M5×40mm – 5pcs M6×10mm – 13pcs | M6×20mm – 8pcs | M6×30mm – 7pcs | M6×40mm – 3pcs Flat Washers:M3 – 220pcs | M4 – 65pcs | M5 – 44pcs | M6 – 31pcsHex Nuts:M3 – 220pcs | M4 – 65pcs | M5 – 44pcs | M6 – 31pcsKey Features Zinc plated for corrosion resistance 24 different size combinations in one kit Phillips round head drive for easy installation Metric sizing: M3, M4, M5, M6 Suitable for DIY, electronics, machinery, furniture assembly, and more Warning: Not suitable for children under 36 months. Keep small parts away from babies and children.

Read more less

10m is the length most drivers settle on. It clears the front of the car, reaches a wallbox on the far side of the garage, and still works in a public bay where you cannot choose which way you park. If your charge point sits right beside the charging port, a 5m cable is cheaper and easier to store. We supply the 10m in two forms, and they do different jobs: Type 2 to Type 2: the standard cable for UK home wallboxes and public charge points, available in 16A, 32A single phase and 32A three phase. Type 2 to 3 Pin, 6 to 12A adjustable: charges from an ordinary UK 13A socket with no wallbox needed. Slower, but it plugs in anywhere. More on charging from a domestic socket. Does a 10m cable charge more slowly than a 5m? No. Voltage drop over a correctly rated 10m cable is negligible, and the charge rate is set by your car's onboard charger and the charge point, not by cable length. The full explanation is here: do longer EV cables take longer to charge? Our Type 2 to Type 2 cables are IP55 rated and our Type 2 to 3 Pin cables are IP67 rated, so both are fine to use and leave connected outdoors in British weather. What the IP rating means. Every cable is built to the IEC 62196 Type 2 standard, CE safety certified, and carries a 2 year manufacturer's warranty with free next working day UK delivery. Need more reach? We also stock a 15m charging cable and a 20m extra long EV charging cable, which is the longest length we sell. The 10m listing also carries a 10m Type 2 to Type 2 extension. That one adds reach to a cable you already own rather than replacing it, so pick it only when your wallbox lead is tethered and cannot be swapped by hand. 10m Charging Cable Speeds These are the specifications we supply in 10m. Your car will charge at whichever is lower, its own onboard limit or the figure below. Specification Max Charge Rate Range Added Per Hour Typical Use Type 2 to Type 2, 1 Phase, 16A (10m) 3.7 kW Around 12 miles Overnight home charging Type 2 to Type 2, 1 Phase, 32A (10m) 7.4 kW Around 25 miles Home wallbox and public Type 2 charge points Type 2 to Type 2, 3 Phase, 32A (10m) 22 kW Around 75 miles Three phase workplace and public charge points Type 2 to 3 Pin, 6 to 12A adjustable (10m) 2.3 kW Around 8 miles Standard UK 13A socket, no wallbox required Type 2 to Type 2 extension, 32A (10m) 7.4 kW Around 25 miles Adds 10m to a cable you already own The three phase 22 kW figure only applies if your vehicle has a three phase onboard charger and the charge point supplies three phase. Almost all UK homes are single phase, so 7.4 kW is the ceiling at home and the 32A single phase cable is the one to buy. 10m EV Charging Cable FAQs Is 10m long enough for my driveway? For most UK homes, yes. 10m covers a wallbox on the garage wall with the car parked either way round, and it leaves slack for a public bay where the post sits behind you. Measure from the charge point to your car's socket, walking round the vehicle rather than across it, then allow a metre of slack. Does the extra length cost me charging speed? It does not. The conductors are sized for the current they carry, so voltage drop over 10m is too small to matter. Your rate is capped by the lowest of three things: your car's onboard charger, the supply at the charge point, and the cable's amp rating. A 10m 32A cable still delivers the full 7.4 kW at home. Which 10m version should I order? For a home wallbox, the 32A single phase Type 2 to Type 2 at 7.4 kW. Pick 16A at 3.7 kW only if your wallbox or car is limited to 16 amps. The 22 kW three phase version is for workplace and public three phase posts, and it will not go above 7.4 kW on a single phase home supply. Can I leave a 10m cable outside in the rain? Yes, while it is plugged in and charging. The Type 2 to Type 2 cables are IP55 rated and the Type 2 to 3 Pin version is IP67 rated, so British weather is not a problem. Between charges, coil it and keep it off the ground so the connectors stay clean and dry, and avoid parking on it. Is the Type 2 to 3 Pin 10m cable worth having too? It is if you ever park where there is no wallbox. Adjustable from 6 to 12 amps, it draws up to 2.3 kW from a normal 13A socket, which is slow but plugs in almost anywhere, including a relative's garage. Many owners keep one in the boot alongside their main Type 2 cable. Should I go up to the 15m instead? Only if you genuinely need the reach. 15m suits long drives, shared parking courts and awkward corners, but it is bulkier to coil and heavier to carry. Charging speed is identical either way. If 10m reaches with slack to spare, stay at 10m, and if it is borderline, take the 15m.

Read more less

This is a pack of 10 glue sticks with a diameter of 7mm. This is used with our XT60 Glue Gun . Specification Diameter : 11mm, 7mm Quantity : 10 Pieces Material : PU resin Melt viscosity : 5300CPS Curing time : 8~10s Color : White transparent Melting temperature : 75'C +/- 5'C Operation temperature : 160'C~180'C Length : 27cm(11mm), 29cm(7mm) Compatible with 40W/60W/80W/100W hot melt glue gun Application range : Used in glass, ceramics, metal, wood, toys and packaging, the detailed information could be reference below : Use Cases 1. Toy model designed adhesive. 2. Artificial flowers, Christmas trees, holiday wreaths. 3. Decorations, metal products, leather, cloth jewelry. 4. Wood products, paper jam. 5. Electronic circuit boards, plastic products. 6. Filled glass, doors, windows, sewing, ceramics, etc. 7. Packaging sealing, the sticky candy boxes, cake boxes. 8. Home all kinds of easy maintenance bonding. Contents 10 Pcs Hot Melt Glue Sticks

Read more less

Stainless Steel Flat Washers (M2/M3/M5) Your bolts have commitment issues. They vibrate loose, they strip your carbon fibre, and frankly, they're a bad influence on your flight controller. It's time for an intervention. These simple 304 stainless steel flat washers are the low-profile backup your FPV build or DIY project desperately needs. Forget fancy coatings that chip off; this is the classic, clean silver finish that says "I build things that last longer than the latest TikTok trend." Why You Want It Let's be honest, you're not here for a life-changing washer experience. You're here because you just chewed through a £50 frame with a £0.02 screw. These unassuming metal circles spread the load, prevent bolts from pulling through, and give your stack the lockdown it deserves. They're the unsung heroes of hardware, the silent protectors against your own over-tightening enthusiasm. Think of it as cheap insurance for your very expensive plastic-and-silicon habit. Specifications Material: 304 Stainless Steel (because rust is for shipwrecks, not drones) Type: Flat Washer (the gold standard of not-messing-up-your-stuff) Finish: Standard Silver (no tactical paint job, just pure, unadulterated stainless) Sizes Available: M2, M3, M5 (pick your poison, or just admit you need all three) Quantity: 10 pieces per pack (counted by a human who can, in fact, count to ten) What's in the Box* 10× 304 Stainless Steel Flat Washers (in your chosen size) Disclaimer *These are washers, not get-out-of-CAA-paperwork-free cards. They'll secure your stack, not your flight permissions. Still Here? Wow, you've scrolled to the bottom of a page about washers. We're either SEO geniuses or you're seriously procrastinating. Look, these 304 stainless flat washers are the bits you always forget until it's too late. Save your future self from a stripped frame and a string of curse words. Toss a pack in your cart and be the hero your workbench needs.

Read more less

Black Stainless Steel Washers (M2/M3/M5) You've done it. You've achieved the perfect "murdered-out" FPV build. The frame is matte, the props are black, even the zip ties are voids of darkness. Then you see it: a glint of shameful, shiny silver from a standard washer. The horror. Fix that aesthetic crime with our black stainless steel flat washers . They're the full stop on a perfectly punctuated stealth build and, you know, they also stop your bolts from annihilating your carbon fibre. Why You Want It Sure, any old washer spreads force and prevents damage. But does a silver washer complete the all-black vibe you've spent weeks curating? No. Does it make your stack look 20% more intimidating? Absolutely not. These black-coated 304 stainless washers lock your hardware down tighter than the Raspberry Pi supply chain, all while maintaining your carefully crafted colour scheme. It's okay to admit you want them because they look cool. This is a safe space. (It's also a web page trying to sell you things). Specifications Material: 304 Stainless Steel (underneath that cool exterior is pure, rust-hating metal) Type: Flat Washer (the humble disc that stands between you and a £40 frame repair) Finish: Matte Black (because glossy shows fingerprints, and you're better than that) Sizes Available: M2, M3, M5 (grab all three to save yourself from a future "Oh, for crying out loud" moment) Quantity: 10 pieces per pack (or 7, by the time they roll off your desk into the void) What's in the Box* 10× Flat Black 304 Stainless Steel Washers (in your chosen size) Disclaimer *The black coating will not, we repeat, *not* make your quadcopter invisible to radar, the CAA, or angry park-goers. Still Here? You're deep-diving on black washers. We respect the commitment. You're clearly someone who appreciates the finer details, the person who knows that the secret to a professional build is consistency. These black M3 washers for FPV drones aren't just hardware; they're a statement. Stop reading and start building. Your quad will thank you for not making it wear mismatched socks.

Read more less

10pc 3M Gum Battery Silicone Anti-Skid Pad Adhesive Tape Keep your batteries locked down and skid-free with these 3M Gum Battery Silicone Anti-Skid Pads. This 10-piece pack is designed to keep batteries firmly in place, no matter how hard your RC drone, car, or model is pushed. Made from high-quality silicone with a 3M adhesive backing, these anti-skid pads offer strong, stable grip without leaving sticky residue behind. The flexible, durable silicone material provides a soft cushion for your batteries, protecting them from scratches while ensuring they stay secure through every twist, turn, and jump. Perfect for hobbyists and competitive RC enthusiasts, these reusable pads are quick to apply, remove, and reuse. Ideal for securing batteries in drones, cars, and any model where stable battery placement is essential. Key Features: Anti-Skid Design : Keeps batteries from slipping or moving during use. 3M Adhesive Backing : Reliable, sticky grip that holds but doesn't leave residue. Flexible & Durable : Silicone material absorbs shock and protects battery surfaces. Easy Application : Just peel and stick for secure, non-slip battery placement. Reusable : Pads maintain adhesion through multiple uses, perfect for frequent swaps. Specifications: Quantity : 10 anti-skid pads per pack Material : Silicone with 3M adhesive backing Dimensions : Compatible with standard RC battery mounts Use Case : Works with RC drones, cars, and various model types What's in the Box: 10 x 3M Gum Battery Silicone Anti-Skid Pads Note: Adhesive strength may vary based on battery surface and environmental factors.

Read more less

10pc 3M Gum Battery Silicone Pads Secure your battery with confidence using these 3M Gum Battery Silicone Pads, the ultimate solution for preventing battery slippage in RC drones, cars, and other models. This 10-piece pack of high-quality silicone pads offers a sticky, non-slip surface that keeps batteries stable and secure, even through intense maneuvers. The flexible silicone material ensures a snug fit without damaging battery surfaces, and the 3M adhesive backing provides reliable grip on a variety of materials. Perfect for hobbyists and pros alike, these reusable pads are easy to install and remove, leaving no residue on your components. Ideal for both indoor and outdoor models, these pads help maintain consistent battery placement, so you can focus on performance. Key Features: Non-Slip Surface : Silicone design with 3M gum backing keeps batteries firmly in place. Flexible and Durable : High-quality silicone material protects battery surfaces from scratches and wear. Easy to Use : Simple to install and remove, with no sticky residue left behind. Multi-Purpose : Compatible with RC drones, cars, and other models needing battery stability. Specifications: Quantity : 10 silicone pads per pack Material : Silicone with 3M adhesive backing Dimensions : Sized for standard RC battery mounts Compatibility : Suitable for drones, RC cars, and various model types What's in the Box: 10 x 3M Gum Battery Silicone Pads Note: Adhesive effectiveness may vary based on battery surface type and environmental conditions.

Read more less

The "Don't-Call-It-Velcro" Hook and Loop Tape (10-Pack) Let's face it, your LiPo is an escape artist. You need this 10-pack of... well, let's just say our solicitors get a nervous twitch if we use the V-word. You know the one. So, legally, this is premium, brand-agnostic self adhesive hook and loop tape. It's the grippy stuff you know and love, engineered to stop your battery from achieving low-earth orbit during a power loop. Think of it as the ultimate FPV battery strap foundation, minus the actual strap. You still need one of those. Why You Want It Picture this: you've just nailed a buttery smooth trippy spin, the footage is looking crisp, and then... silence. Your battery, now liberated, is enjoying its own ballistic trajectory into a puddle. Our hook and loop tape is the simple, cheap insurance against that specific brand of sadness. We could claim it's woven from unicorn hair and tested by Joshua Bardwell himself, but honestly, it's just solid adhesive and quality nylon that works, regardless of what you're legally allowed to call it. It's your wallet's best friend. Specifications Quantity: 10 Strips (5x Hook, 5x Loop, because they're not much use on their own) Dimensions: Approx. 100mm x 20mm (give or take, we're not building a satellite here) Adhesive: Industrial-strength sticky stuff (seriously, wipe the carbon dust off your frame first) Material: Woven Nylon (the technical term for the-stuff-that-isn't-Velcro) Colour: Black (matches the soul of your quad after a run-in with a gate) What’s in the Box* 5 x Self Adhesive Hook Strips 5 x Self Adhesive Loop Strips Disclaimer *The colour of the backing paper may vary, but we guarantee the business side will be sticky and the fluffy side will be fluffy. Still Here? You've read an entire product page for what is essentially posh tape with a brand name we cannot mention. Your dedication is either admirable or a sign you really need to finish that build. This is the most reliable drone battery mounting solution for pennies a strip. Go on, treat your quad. Add it to your basket and then maybe go outside for a bit. The sky is waiting.

Read more less

Pack of 10 - M3 Black Nylon Hex Standoffs (Male to Female) Your flight stack deserves better than a pile of washers and broken dreams. These M3 black nylon hex standoffs (male to female) are full-threaded, ultralight, and totally non-conductive — keeping your boards perfectly spaced and your magic smoke safely contained. Ideal for FPV drones, 3D printers, Arduino projects, or anything else you're building at 2am instead of sleeping. Available in M3x5+6, M3x6+6, M3x8+6, or M3x10+6 — because height matters. Why You Want It Because tangled wires, dodgy spacing, and fire-risk mounting are so last year. These standoffs are full-threaded for reliable grip, male-to-female for easy stacking, and made from black nylon that's both lightweight and electrically insulating. Translation: zero shorts, zero stress, and max flex when you show off that clean build pic. Function meets fashion — if fashion was hex-shaped. Specifications Thread Size: M3 (because M2 is cute, but sometimes you need serious grip) Material: Nylon (non-conductive, lightweight, anxiety-reducing) Type: Male to Female Hex Standoff (stack 'em high) Thread Type: Full Thread (no half measures here) Quantity: 10 Pieces (one for the build, nine for when gravity wins) Size Options: M3x5+6, M3x6+6, M3x8+6, M3x10+6 (pick your stack height) What's in the Box* 10× M3 Black Nylon Hex Standoffs (Male to Female, Full Thread) — your chosen size Disclaimer Size depends on your selection. Black nylon guaranteed. Sense of superiority over messy builds sold separately. Still Here? Look at you, reading standoff specs like it's the Sunday Times. Treat your flight controller (and yourself) to these M3 black nylon male-to-female standoffs. Hit Add to Cart — because clean builds are self-care.

Read more less

Pack of 10 - M2 Black Nylon Hex Standoffs (Full Thread) For when your flight stack needs a lift — literally. These M2 black nylon hex standoffs are lightweight, non-conductive, and full-threaded to keep your FC, ESC, and VTX perfectly spaced without adding grams. Ideal for FPV drones, electronics projects, or any build where "oops, shorted it" is a phrase you'd rather retire. Available in sizes from M2x5 to M2x10. No excuses left. Why You Want It Because zip ties are not structural components (no matter what your last build says). These nylon standoffs are full-threaded for maximum grip, ultralight for serious weight savings, and non-conductive to keep the magic smoke where it belongs — inside your circuits. Black finish keeps it stealthy, clean, and just a bit cooler than that pile of random hardware you were about to use. Specifications Thread Size: M2 (the FPV and maker standard) Material: Nylon (lightweight, non-conductive, stress-free) Type: Hex Standoff (all grip, no nonsense) Thread Type: Full Thread (every turn counts) Quantity: 10 Pieces (unless your floor eats one... again) Size Options: M2x5, M2x6, M2x8, M2x10 (pick your stack height) What's in the Box* 10× M2 Black Nylon Hex Standoffs (Full Thread) — your chosen size Disclaimer Size based on your selection. Colour is always black, regretfully not matching your missing Allen keys. Still Here? Either you're serious about stack clearance or just enjoy reading about nylon. Either way, these M2 black nylon hex standoffs are waiting to declutter your build and your conscience. Hit Add to Cart — you deserve organised wiring.

Read more less

Pack of 10 - 10.9 Grade Steel Allen Key/Button Cap Head Bolts (Full Thread) These high-strength 10.9 grade steel hex button head bolts offer exceptional durability and precision. Featuring a full thread design, they are ideal for a variety of engineering, mechanical, and DIY applications. Specifications: Thread Size: M2 Material: 10.9 Grade Steel Head Type: Allen Key / Hex Button Thread Type: Full Thread Quantity: 10 Pieces Available in a range of sizes: M5x5, M5x6, M5x8, M5x10, M5x12, M5x16, M5x18.

Read more less

10× Aluminium Button Head Washers - M2 (Assorted Colours) Button head washers. Tiny. Mighty. And—let's be honest—way cooler than anyone expects from a washer. This 10-pack of M2 aluminium button head washers delivers strength, precision, and enough colour options to make your frame look like it's sponsored (it's not). Built for FPV rigs, 3D printers, or whatever chaotic DIY rabbit hole you've tumbled into. Why You Want It Cracked carbon? Loose stacks? Not on this build. These featherweight M2 washers perfectly distribute load under button head screws, keeping your frame intact while adding some premium drip. Eleven anodised colours mean you can match your vibe—or just confuse everyone. Functional? Absolutely. Overkill? Maybe. Regrettable? Never. Specifications Thread Size: M2 (tiny but terrifyingly useful) Material: Aluminium (light, strong, shiny) Head Type: Button Head (fits like a glove... if your glove had a curved profile) Thread Type: N/A (they're washers, not bolts) Quantity: 10 pieces (yes, it's actually 10) Colours: Black, Sapphire Blue, Sky Blue, Red, Pink, Green, Purple, Grey, Gold, Silver, Orange (your dopamine hit, delivered) What's in the Box* 10× Aluminium Button Head Washers (M2 size) Disclaimer *Colours may vary slightly because anodising isn't an exact science. But you will get 10 legit washers. Whether you use them correctly is on you. Still Here? Washer nerd? Build perfectionist? Or just aggressively procrastinating? Either way, these M2 aluminium button head washers are ready to save your carbon—and your dignity. Toss ‘em in the cart. Your frame will thank you (silently).

Read more less

Pack of 10 - 12.9 Grade Steel Allen Key/Hex Cap Head Bolts (Full Thread) - M2 x 6mm These high-strength 12.9 grade steel hex cap head bolts offer exceptional durability and precision. Featuring a full thread design, they are ideal for a variety of engineering, mechanical, and DIY applications. Specifications: Thread Size: M2 Length: 6mm Material: 12.9 Grade Steel Head Type: Allen Key / Hex Cap Thread Type: Full Thread Quantity: 10 Pieces Available in a range of sizes: M2x5, M2x6, M2x8, M2x10, M2x12, M2x16, M2x18, M2x20, M2x25, and M2x30.

Read more less

10× Aluminium Cap Head Washers - M2 (Assorted Colours) Think washers are boring? Not these. This 10-pack of M2 aluminium cap head washers adds strength, precision, and frankly unnecessary levels of drip to your FPV rig, 3D printer, or DIY monstrosity. Available in 11 anodised colours—because black hardware is so last build. Why You Want It Protect your frame. Stop cracked carbon before it starts. These lightweight M2 washers distribute load perfectly under cap head screws—no threads, just good engineering. Bonus: they also make your builds look like you actually know what you're doing (even if you don't). Will anodised pink make you faster? No. But it will make you happier. Specifications Thread Size: M2 (tiny but mighty) Material: Aluminium (light, strong, shiny) Head Type: Cap Head (perfect fit for socket heads) Thread Type: N/A (they're washers, not magic) Quantity: 10 pieces (counted twice, you're welcome) Colours: Black, Sapphire Blue, Sky Blue, Red, Pink, Green, Purple, Grey, Gold, Silver, Orange (rainbow vibes for days) What's in the Box* 10× Aluminium Cap Head Washers (M2 size) Disclaimer *Colours may vary slightly by batch. You'll get 10 real, functional washers—not a promise of better flying skills. Still Here? Serious question: are you a washer connoisseur, or just avoiding that half-finished build on your bench? Either way, these M2 aluminium cap head washers are lighter than your excuses. Grab them before your next crash teaches you why you should've.

Read more less

10× Coloured Aluminium Countersunk Washers Your screws deserve a throne. These anodised aluminium countersunk washers don't just hold your hardware—they elevate it. Designed for flat-head bolts and maximum flair, this 10-pack is perfect for adding grip, strength, and just the right amount of "yeah, I meant to do that" to any FPV frame, 3D printer, or overengineered project. Why You Want It Flat-head screws love to chew up soft material—unless you give them a proper seat. Enter these featherweight aluminium countersunk washers: load-spreading, frame-saving, and anodised in enough colours to make your build look sponsored (it's not). Whether you're going stealth mode or full RGB, these washers slap—literally and visually. Specifications Type: Countersunk Washers (for flat-head screws) Material: Anodised Aluminium (light, strong, shiny) Finish: Mixed Colours (because black-and-silver builds are over) Quantity: 10 pieces (yep, a full colour chaos sampler) What's in the Box* 10× Countersunk Aluminium Washers (assorted anodised colours) Disclaimer *Exact colour mix may vary—what you won't get is boring. Functionality? 100%. Colour harmony? Chaos by design. Still Here? Either you really love anodised hardware (respect) or you're avoiding that ESC calibration. These countersunk washers turn basic bolts into frame-saving statements. Click buy—your flat-head screws will finally feel seen.

Read more less

Pack of 10 - M2 10.9 Grade Steel Countersunk Hex Bolts For when plastic just won't cut it. These M2 10.9 grade steel countersunk hex bolts are small, mighty, and unapologetically over-engineered. Whether you're fixing a drone frame, assembling a 3D printer, or doing some "totally temporary" repairs, these full-thread bolts are built to survive your bad decisions. Available in sizes from M2x5 to M2x16 — because one size definitely doesn't fit all. Why You Want It They're not just bolts — they're tiny stress therapists for your projects. The 10.9 grade steel laughs in the face of stripped heads and snapped threads. Full-thread design means maximum grip, minimum slippage. Oh, and unlike that mystery bolt you found under your sofa, you actually know what these are rated for. Specifications Thread Size: M2 (tiny but terrifyingly strong) Material: 10.9 Grade Steel (because mild steel is for quitters) Head Type: Hex Countersunk (flush fit, pro look) Thread Type: Full Thread (all grip, no quit) Quantity: 10 Pieces (unless you drop one... then 9) Size Options: M2x5, M2x6, M2x8, M2x10, M2x12, M2x16 (choose wisely) What's in the Box* 10× M2 10.9 Grade Steel Hex Countersunk Bolts (Full Thread) Disclaimer Sizes selected at checkout. Contents may vary by how good our coffee was when packing. Bolts guaranteed — bubble wrap not. Still Here? Either you really care about bolt specs or you just love reading disclaimers. Either way, these high-strength M2 countersunk hex bolts are waiting to upgrade your drone, printer, or sanity. Add to cart... before someone else raids the bolt bin.

Read more less