Electronics Accessories

This Maplin Twin 1/4" 6.35mm 2 Pole Jack Plug to Twin RCA Phono Cable carries stereo sound across a variety of audio devices. It is a highly versatile cable and commonly used when connecting equipment in the home and DJ audio systems, musical instruments, and passive/active speaker systems.The Twin Phono and 1/4" Jack terminals on this cable carry two mono signals across each connector, which are combined in audio equipment for stereo sound.

Read more less

A highly versatile Maplin HDMI to HDMI V2.0 4K Ultra HD 60fps Braided Cable with Ethernet that is fully compatible with HDMI 2.0 and supports resolutions up to 4K Ultra HD @60fps. 8K can be transferred at 30fps. Combines high definition video and multi-channel audio into one cable. Commonly used for connecting TVs to Sky boxes, streaming devices, Blu-ray/DVD players and game consoles, as well as for PC connectivity. This cable has a fabric braided outer to ensure both durability and flexibility.This cable also supports HDMI Ethernet channel, Audio Return Channel (ARC) & 3D over HDMI support.

Read more less

Use the Maplin USB-C to HDMI V3.1 Adapter (Supports 4K Ultra HD @30Hz) to connect a smartphone, PC, notebook or tablet to an HDMI compatible monitor, TV or projector. HDMI cable sold separately. No Power or external driver needed

Read more less

The SanDisk 32GB Ultra MicroSDXC Card Class 10 100MB/s gives you the freedom to shoot, save and share more than ever before. The 32GB capacity card has room for hours of Full HD video and delivers transfer speeds of up to 100MB/s to help you move that content fast.Works with Android Smartphones and TabletsSanDisk cards are compatible with Android smartphones and tablets.Capture and Store Even More Hours of Full HD VideoWith a capacity of 32GB, you can store even more hours of Full HD video on the card without worrying about running out of room for the videos, photos, music, movies and other files you want to shoot, save and share.Transfer Speeds of up to 100MB/sBlazing transfer speeds mean you’ll spend less time waiting to move your content.Full HD Video CaptureClass 10 speed rating allows you to shoot Full HD video and high quality photos. Product FeaturesWorks with Android™ smartphones and tabletsUp to 512GB to store even more hours of Full HD videoClass 10 for Full HD video recording and playbackSanDisk® Memory ZoneTM app for easy file management CompatibilityCompatible with all microSDHC, microSDXC supporting host devices SpecificationsCapacity: 32GBForm Factor: microSDHC™ / microSDXC™Sequential Read Performance: Up to 100MB/sWarranty: 7-Year Limited WarrantyDimensions (L x W x H): 1.02mm x 14.99mm x 10.92mmWeight: 4.54gModel Number: SDSQUNR-032G-GN3MAOperating Temperature: -25°C to 85°CNon-Operating Temperature: -40°C to 85°CCertifications: CE, FCC, C-Tick/RCM, UKCA, EAC, ICES

Read more less

This Maplin Power Lead IEC C7 Fig 8 2 Pin Plug to UK 3 Pin Mains Plug, also known as a figure 8 lead, is commonly used for low powered appliances such as portable TVs, set-top boxes, and some laptop power supplies. The PVC connectors are moulded to provide a high-quality cable that is perfect for home and office use. Most of the SKY boxes currently use this figure of 8 cable for power. The plug is pre-fitted with a fuse.

Read more less

5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a 100W PD-IN port. Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.   Model Number: A8355 Anker 332 USB-C Hub (5-in-1) The Compact and Easy-to-Use Hub Turn one of your device's USB-C ports into 5 ports, allowing you to transfer data in seconds, stream media in unrivalled clarity, and enjoy high-speed pass-through charging. 4K External Display, Connect to the HDMI port to mirror or extend your display to an external monitor at up to 4K@30Hz, making it easier to multitask across several apps.   Access Files at Speed Transfer movies, photos, and music at speeds of up to 5 Gbps via the USB-C and USB-A data ports.         1 Ultra-Thin Design 2 Simplify with 5-in-1 3 Hassle-Free Connectivity     1 Enhance Your Fun 2 Boost Work Efficiency     Note: For an optimal experience, we recommended connecting the wall charger when using the following devices with the hub: 1. Surface Go 2. ASUS CM3 Tablet 3. Galaxy S23 Ultra 4. Galaxy Tab S7+ 5. LG V60 Comparison Table

Read more less

What are 3.5mm jack leads used for? This Maplin Pro 3.5mm Aux Stereo 3-Pole Jack Plug to Twin RCA Phono Braided Cable carries Stereo sound across a variety of audio devices. It is a highly versatile cable and commonly used when connecting audio equipment to smartphones and MP3 players, tablets, computers, TVs and gaming consoles. It is also used in many in-car audio and DJ audio systems. What is Twin Phono used for? Twin Phono is also known as an RCA connection and carries two mono signals across each Phono connector, which are combined in audio equipment for stereo sound.

Read more less

This Maplin Power Lead IEC C13 Female Plug to UK 3 Pin Plug, also known as “kettle lead”, is most commonly used in high powered applications such as computer monitors, TVs, Audio systems, Desktop PCs, printers and many more. As these cables are built to carry heavy current through them, the cable jacket is slightly thicker than conventional power cables and heavy-duty connectors.

Read more less

Reliable Drone Connections: 2 Pack UFL to SMA Female Antenna Pigtail Cable (RG178, 100mm) Ensure clear signals and robust connections in your drone build with this essential 2-pack of UFL (IPEX/IPX) to SMA Female pigtail cables. Measuring 100mm and using flexible RG178 coax, these cables are perfect for connecting components like VTXs, receivers, or GPS modules with UFL connectors to standard SMA antennas. The durable construction and precise connectors provide a secure link for optimal performance. Keep a spare or equip multiple builds! Key Features: Connector A: UFL (IPEX/IPX) - Common on mini VTX/RX/GPS modules Connector B: SMA Female (Standard thread, center pin) - Connects to most standard drone antennas Cable Type: RG178 - Low loss and flexible for tight installations Length: 100mm (approx. 4 inches) - Versatile length for many drone frames Quantity: 2 Cables per Pack Ideal for: FPV VTX, Radio Receivers, GPS Modules, Custom Drone Builds & Repairs.

Read more less

Are you tired of ESCs (Electronic Speed Controllers) that act like stubborn mules? Say hello to the NeutronRC USB ESC Link, your go-to gadget for taming these tech beasts. It's like having a universal translator for your ESCs, but without the awkwardness of talking to extraterrestrials. What's This Gizmo All About? Universal Compatibility : The NeutronRC USB ESC Link plays nice with a variety of ESCs like AM32/BL32, among others. It's like the Swiss Army knife for ESCs, minus the tiny scissors. Plug, Play, Tame : Connect your ESC, plug in the USB Type-C (cable not included, because we know you have a million of them), and let your computer do the rest. It's easier than teaching your grandma to text. Petite Powerhouse : At a minuscule 20x10x8mm, this little wizard is more portable than your excuses for not going to the gym. In the Box : 1 x USB Link (Note: Wires not included. We trust you can handle that part.)

Read more less

Sleek, Lightweight, and Designed for Precision The DJI FPV Remote Controller 3 isn't just an update; it's a complete overhaul designed to make your drone piloting smoother and more intuitive than a psychic reading your palm. With a form factor that's lighter than its older sibling, this controller doesn't just fit in your hands comfortably—it feels like it was born there. We've extended the control sticks by 2mm (because size matters in control precision), allowing both single and double-fingered drone pilots to maneuver with the grace of a ballet dancer. Whether you're weaving through tight spaces or soaring across the sky, this controller responds with the kind of sensitivity that would make a high-end sports car jealous. Modes for Every Pilot Why limit yourself? The DJI FPV Remote Controller 3 is packed with three modes: Normal Mode: For those who like their flying straightforward and stress-free. Sport Mode: Adds a bit of spice to your flights without going full Maverick. Manual Mode: Perfect for the adrenaline junkies wanting to push their skills to the limit (helmets not included). Pro Tips for Supreme Control Customize Your Grip: Use the included L-shaped screwdriver to tweak the control sticks. It's like adjusting your chair before a long gaming session—comfort is key! Simulator Compatibility: Practice makes perfect, and with support for top-tier simulators like Liftoff and DCL, you'll be mastering the skies without risking a real crash. Virtual crashes are less heartbreaking! In the Box: DJI FPV Remote Controller 3 × Accessories Specifications: The Nitty-Gritty Weight: Approx. 240 g Dimensions: 165×119×62 mm (L×W×H) Operating Time: Approx. 10 hours Charging Time: Approx. 2 hours Compatibility: DJI Avata 2 DJI Goggles 3 The DJI FPV Remote Controller 3 is not just a tool; it's your ticket to an unmatched flying experience. Get ready to pilot your drone like never before, with precision so sharp it could cut through air.

Read more less

This is a single SMA female to SMA male adaptor—perfect for when your VTX or FPV goggles don't quite match your antenna, or if you need to angle a patch antenna just right without resorting to duct tape and desperation.

Read more less

ExpressLRS Recovery Dongle is an FTDI USB to TTL module based on the CP2102 bridge controller, which is applied to the firmware upgrade for the ESP32&ESP8XX chip. The ExpressLRS Recovery Dongle is compatible with many ELRS receivers in the market such as ELRS Lite Receiver, ELRS Nano Receiver, ELRS Micro Receiver, and FPV goggles backpack. It will be a good choice to unbrick the ELRS receiver when failed in updating or flash firmware by UART. Features Unbrick and recover the ELRS receiver when having a failed update such as the missing bootloader. Soldering Free! It features spring probe pins for more convenient use. Connecting it with the ELRS receiver directly does not need to solder. ExpressLRS Recovery Dongle FTDI USB to TTL module is covered by the case and is more durable and portable compared with the naked board version on the market. Support many computer systems in the market like Windows, MAC, and Linux. This module uses a Type-C USB port for connecting the computer. Specification USB Interface: Type-C USB male connector Operating Voltage: 5V. Logic Voltage: 5V. 3.3V power supply output current: 400mA Pins output method: 2*4P-2.54mm pin header Serial baud rate: Up to 921600bps. Support USB1.1, USB2.0 USB to Serial chip (CP2102) supports XP, win7 / win8 32bits, 64bits, win10 / 11 32bits, 64bits, Linux, MAC Know More About FTDI Module ExpressLRS Recovery Dongle (FTDI Module) is mainly used to unbrick the ELRS receiver when having a failed update by Wifi upgrading or passthrough but also provides the UART way to upgrade the ELRS receiver or backpack. This FTDI module features spring probe pins and a connector for non-soldering use, which is more convenient for users. Besides, it is very durable and portable with a shell. Included 1 * ExpressLRS Recovery Dongle 1 * 4 Pin Cable 1 * Probe Converter Board

Read more less

The default antenna included with the TBS Tracer is the Immortal T 2.4GHz antenna, manufactured by TBS. It is made from lightweight, multi-strand stainless steel wire in an injected rubber enclosure, RF balanced with a balun between active element and ground. The combination of weight, durability, expected range, and performance bar none with this antenna, and it is ideal for race and freestyle mini quad use. Specifications Cable length: 80mm Antenna width: 60mm Weight: 0.84g Gain: 2dBi VSWR: < 1.4 Expected range: Full range (15mi+/25km+ with TBS Tracer) Includes 1x TBS Tracer Immortal T Antenna

Read more less

This is a 30cm long, super soft-shielded HDMI to micro HDMI conversion cable that is suitable for Panasonic GH4, the GoPro series and more. The super soft cable makes this cable extra durable and extra lightweight. Specifications: Connector type: Micro HDMI to standard HDMI Wire length: 30cm Weight: 5.7g

Read more less

Specifications Weight: 1.8grams Length: approximately 102mm (include shrink tube) Width: 1.79mm Includes 1 x TBS 5G8 MMCX Linear Antenna

Read more less

For more challenging installations where performance is crucial (such as long-range foam planes), we recommend this 2.4GHz sleeve dipole antenna for the TBS Tracer receivers. They are lightweight and not T-shaped, so easier to install on flat or curved surfaces. Specifications Total length: 136mm Weight: 1.00g Gain: 1.5dBi Connector: IPEX / u.FL Expected range: Full range (15mi+/25km+ with TBS Tracer) Includes 2x TBS Tracer Sleeve Dipole RX Antenna

Read more less

Male Long Deck Connector - Expand Your Crazyflie Setup Designed for use with the Crazyflie 2.X expansion deck system , the Male Long Deck Connector allows you to stack and connect up to three expansion decks , making your Crazyflie even more versatile. Whether you're adding sensors, communication modules, or custom extensions, these long male expansion headers ensure a secure and reliable connection while maintaining a compact and lightweight design. Key Features: ✅ Supports Multi-Deck Stacking - Enables the use of up to three expansion decks on your Crazyflie. ✅ Precision Fit - Designed for seamless integration with the Crazyflie 2.X deck system. ✅ Lightweight & Durable - Minimal impact on flight performance while providing strong connections. ✅ 10-Pin Configuration - Ensures a stable electrical connection for various expansion decks. ✅ Easy to Install - Plug-and-play design makes setup quick and hassle-free. Specifications: Number of Positions: 10 Pin Spacing: 2mm Pin Thickness: 0.5mm Pin Lengths: 15mm (top) / 6mm (bottom) Plastic Section Height: 4mm Overall Size: 20mm x 25mm x 2mm Weight: 0.7g What's in the Box? 4 x Long Male Expansion Headers

Read more less

TrueRC Canada 45-Degree RP-SMA Male to SMA Female Adapter So, you've got those sleek DJI FPV Goggles, but your favourite high-performance antennas are all stubbornly SMA? Or maybe your current antenna setup feels less like an ergonomic masterpiece and more like an antenna trying to give you an eye exam? Enter the TrueRC Canada 45-Degree RP-SMA Adapter - the tiny titan of connectivity you didn't know you needed. This nifty little adapter is your golden ticket to bridging the RP-SMA world (looking at you, DJI) and the vast universe of standard SMA antennas. The crucial 45-degree angle isn't just for show; it helps get those antennas pointing optimally without awkwardly jutting out or interfering with head straps. Perfect for cleaning up your goggle setup and achieving that perfect signal reception angle. Crafted by the signal wizards at TrueRC, this adapter boasts ridiculously low loss - less than 0.1dB at 5.8GHz! That means you're converting connector types without sacrificing precious signal strength, unlike some questionable adapters dredged from the depths of the internet. Keep your link quality high and your connection solid. Stop wrestling with incompatible connectors or awkward antenna angles. Get the clean, low-loss connection you deserve. Search Terms You Might Have Used (Hey there!): RP-SMA to SMA Adapter, 45 Degree SMA Adapter, DJI Goggle Antenna Adapter, TrueRC Adapter, Low Loss SMA Adapter, Right Angle SMA Adapter, FPV Goggle Adapter, RP-SMA Male to SMA Female, Antenna Angle Adapter. Specifications: Connector A: RP-SMA Male (Reverse Polarity - Male housing, center pin receptacle) Connector B: SMA Female (Standard - Female housing, center pin) Angle: 45 Degrees Signal Loss (@ 5.8GHz): < 0.1dB (Ultra Low Loss) Manufacturer: TrueRC Canada What's In The Box: 1 x TrueRC Canada 45-Degree RP-SMA Male to SMA Female Adapter Disclaimer: It's usually just the adapter in a tiny bag. Packaging might evolve, shrink, or grow slightly depending on cosmic alignments and supply chain moods. The essential, high-quality, low-loss adapter functionality remains constant!

Read more less

This is a pack of 2 SMA female to SMA male adaptors, ideal if you have a VTX or some goggles with a connector that doesn't match your antenna, or you want to mount your patch antenna at a slight angle.

Read more less

This dipole antenna gives you enhanced reception on your R9 mini and R9MM receivers to get the best long range performance. This is the EU 868Mhz version. Brand: FrSky Item Name: FrSky Ipex4 Dipole T Antenna Specification Frequency Range: 860-868MHz (LBT) / 900-930MHz (FCC) Peak Gain: 2.7dBi@864Mhz / 2.6dBi@915Mhz Feed Impedance: 50ohm RF Cable: RF 1.13 Connector: Ipex4 Compatible with receivers: R9 Mini / R9 MM Receiver Features High efficiency Quick integration Package Included 1 x FrSky Ipex4 Dipole T Antenna

Read more less

This is a cable designed to interface Pixhawk 2 Autopilots to the RFD series telemetry modems. The longer length of this cable gives more options in positioning the modem for tidy installations. It makes connection simple, with JST-GH 6 way to, 0.1" pitch socket. Length : 5.9" (150mm)

Read more less

This is a cable designed to interface Pixhawk v1 Autopilots to the RFD series telemetry modems. The longer length of this cable gives more options in positioning the modem for tidy installations. It makes connection simple, with DF13 6 way to, 0.1" pitch socket. Length : 5.9" (150mm)

Read more less