In stock

An adaptor lead kit converting a standard VGA plug and 3.5mm audio to an HDMI socket. Ideal for sending analogue audio and video signals from PCs and laptops to HDMI-compatible TVs, projectors and monitors (additional HDMI cable required). The kit also comes with a Micro USB cable to provide the additional power needed to upgrade the analogue signals to High Definition. Converts standard analogue audio/visual signals to high definition Kit includes micro USB power cable Full HD 1080p compatible Max. resolution; 1080p Cable length; 15cm Dimensions; 260 x 40 x 15mm Weight; 50g

Read more less

These are the propellers used on the Emax Babyhawk II HD, and are 3.5"with a pitch of 28.

Read more less

These are the 5 inch, tri-blade Avan Flow propellers from Emax. Sold in packs of 4 The Emax Avan Flow propeller 5x4.3x3 was designed to maximize control while remaining efficient. A true constant 4.3" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. With a special PC blend the Avan Flow weighs 4.3 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 13.4 grams*square centimeter which in turn makes a very responsive prop. Best match for 2206-2207-2306 motors around 2400kv. The Avan Flow was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds. A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller. Specifications: Pack of 4 Choice of colour: black, red or transparent Geometry: 5 inch diameter 4.3 inch pitch 3 blades Inertial Properties: Weight: 4.3 grams Moment of Inertia: 13.4 g*cm^2

Read more less

The Emax Avan Long Range propeller 6x3.8x2 was designed to maximize range of flight.AAvan Long Range is optimize to operate at 50 mph with a low current consumption at that speed to maximize range. Designed to be used on a 2207 1900kv motor to maximize range on 4s and allowing aggressive flying with 5s. A true constant 3.8" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. An aggressive and thick chord at the root of the blade helps maximize thrust and efficiency at the designed speed. This thicker chord also increases durability and increases the natural frequency of the blade which in turn minimizes vibrations in the quad. This will allow jello free footage. With a special PC blend the Avan Long Range weighs 4.6 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 14.4 grams*square centimeter which in turn makes a very responsive prop. Best match for the Emax LS2207 1900kv motor on 4s. The Avan Long Range propeller was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds. A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance. Specifications: Pack of 4 Choice of colour: clear, clear black Geometry: 6 inch diameter 3.8 inch pitch 2 blades Inertial Properties: Weight: 4.6 gram Moment of Inertia: 14.4 g/cm^2

Read more less

The Emax Avan Mini propeller 3x2.4x3 was designed for Babyhawk Race 3 inch to maximize flight time and performance. This propeller is matched to Emax 1106 4500kv for 3s and 4s flight. A true 2.4" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Mini weighs 1.25 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 3.05 grams*square centimeter which in turn makes a very responsive prop. The large blade chord makes the propeller very durable. The Avan Mini was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds. A special poly-carbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance. Specifications: 3 inch diameter 2.4 inch pitch 3 blades Weight: 1.25 grams Moment of Inertia: 3.05 g/cm^2 Pack Includes: 6 x CW Avan 3 inch propeller (colour of your choice) 6 x CCW Avan 3 inch propeller (colour of your choice)

Read more less

The Emax Avan Rush propeller 2.5x1.9x3 was designed for Babyhawk Race 2.5 inch conversion kit to maximize performance and flight time. This propeller is matched to Emax 1106 4500kv for 4s or the Emax 1106 6000kv on 3s. A true 1.9" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Mini weighs 1.25 grams. Utilizing thicker airfoils greatly increases durability and stiffness. Most of the weight is centralized near the hub creating a low moment of inertia of 1.24 grams*square centimeter which in turn makes a very responsive prop. The Avan Rush was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds. A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance. Geometry: 2.5 inch diameter 1.9 inch pitch 3 blades Inertial Properties: Weight: 1.4 grams Moment of Inertia: 1.24 g*cm^2 Kit Contents 2x Avan Rush 2.5" CCW 2x Avan Rush 2.5" CW

Read more less

That Avan scimitar series of propellers are designed for the FPV freestyle pilot. With fairly low pitch angles, the scimitar propellers will give you ultra smooth feel in the air. The propellers are also very light to give you a good balance of power and efficiency. Well worth a try if you want a smoother FPV feel. Geometry: 5 inch diameter 2.8 inch pitch 3 blades Inertial Properties: Weight: 3.9 grams Moment of Inertia: 24.1 g*cm^2 Kit Contents 2x CCW Props 2x CW Props

Read more less

That Avan scimitar series of propellers are designed for the FPV freestyle pilot. With fairly low pitch angles, the scimitar propellers will give you ultra smooth feel in the air. The propellers are also very light to give you a good balance of power and efficiency. Well worth a try if you want a smoother FPV feel. Geometry: 5 inch diameter 3 inch pitch 3 blades Inertial Properties: Weight: 5.4 grams Moment of Inertia: 24.1 g*cm^2 Kit Contents 2x CCW Props 2x CW Props

Read more less

Walksnail Avatar Kit Power Cable — VTX Lifeline The Walksnail Avatar Kit Power Cable is your 4‑pin direct link to the Avatar V2 VTX — because no power, no video. Whether you're replacing a toasted wire or building fresh, this pre-terminated cable saves your soldering iron from another bad day. Yep, we're selling a cable. Blame supply chains. Why You Want It Because cutting your VTX power mid‑flight is a special kind of heartbreak. This factory-made cable delivers the right gauge, correct pinout, and peace of mind — without the "did I wire this right?" guessing game. Plus, it pairs clean with your Avatar V2 and saves you from dodgy AliExpress clones. Specifications Connector: 4‑Pin JST‑SH 1.0 mm pitch (matched for Avatar V2 VTX) Length: ~110 mm (short enough to avoid mess, long enough to reach) Wiring: Pre-crimped, plug‑and‑play power + UART signal Compatibility: Walksnail Avatar V2 VTX only (not for HD Pro/First Gen) Cable Gauge: Signal + power balanced for clean video output What's in the Box* 1× Walksnail 4‑Pin Power Cable (pre‑terminated) Disclaimer Bundle may vary by batch, but this power cable will always fit your Walksnail V2 VTX — no guesswork needed. Still Here? Yeah, you're reading a cable description — respect. Either you're a detail freak or prepping a clean build. This Avatar power cable gets you airborne (and not solder‑burned). Add it to basket and spare yourself a wiring meltdown.

Read more less

Axis Flying AE2207 1960KV Motor - High-Performance FPV Powerhouse Looking to push your FPV drone to the limit without draining your wallet? The Axis Flying AE2207 1960KV motor is engineered for top-tier performance while staying budget-friendly. This powerhouse is optimized for 5-inch props and can handle up to 6S LiPo batteries, making it ideal for pilots who crave both speed and control. Its 1960KV rating strikes the perfect balance between thrust and efficiency, allowing for smooth, responsive flights and quick accelerations. Whether you're into racing or freestyle flying, the AE2207 ensures consistent, reliable performance. The motor's build quality is top-notch, featuring a 12N14P configuration , a 1.5mm shaft diameter , and durable materials that hold up to the rigors of aggressive flying. With a total weight of just 32.1g , this lightweight motor won't bog down your quad, letting you keep things fast and nimble. Key Features: KV Rating : 1960KV, perfect for 5" props on 6S batteries. Configuration : 12N14P for high torque and smooth operation. Shaft Diameter : 1.5mm for enhanced durability. Weight : Lightweight at 32.1g with wires, keeping your drone agile. Voltage : Supports up to 6S LiPo for serious power. Specifications: KV : 1960KV Configuration : 12N14P Shaft Diameter : 1.5mm AWG : 20# 150mm Motor Dimensions : Φ27.2x33.3mm Weight (with wires) : 32.1g Cell Compatibility : 6S What's in the Box: 1x Axis Flying AE2207 1960KV Motor Accessories Disclaimer: Included accessories may vary based on stock availability.

Read more less

This is the frame used on the Airforce Pro that can be used for spares or if you want to build your very own micro X8 cinewhoop. This frame uses 20x20mm mounting hardware and supports either HD (Caddx Vista) or analog VTX. This kit includes the carbon fibre frame, motor mounts, 8x Duct Mounts, screws, and LED boards. STL 3D Print Files You can print your own, or we can do it for you via our 3D Print service. AirForce-PRO-X8-GoPro-base AirForce-PRO-X8-camera-and-antenna-mount- AirForce-PRO-X8-GoPro-6-8-9-Mount

Read more less

Specifications Propeller Diameter: 4.9 inch Pitch : 2.6 Blades : 3 Material : Poly Carbonate Weight : 3.7g Hub Thickness:6mm Shaft :5mm Includes 2 x CW Prop 2 x CCW Prop

Read more less

Axisflying C287 Cinematic Motor Series - Elevate Your FPV Filming Experience Axisflying proudly introduces the C287 Cinematic Motor, a ground-breaking addition to our C series, meticulously engineered for Cinematic FPV pilots. With the emerging trend of FPV in cinematic and commercial filming, the C287 stands as a testament to quality, efficiency, and performance, catering to the high standards of filmmakers and hobbyists alike. Why Choose the C287 Cinematic Motor? The C287 is not just a motor; it's a companion for those critical cinematic moments where every shot counts. Designed for pilots who strive for perfection in their craft, this motor is the culmination of smoothness, reactivity, and high torque, ensuring a delicate yet precise control experience. Its efficiency is paramount, extending your flight times and enhancing your creative potential. Key Features High Performance and Efficiency: Tailored for those who demand the best, the C287 offers unmatched performance, ensuring your cinematic footage is smooth and steady. Versatile Compatibility: Whether you're using 6-7" LongRange, CineLifter X8, or 5" Cinewhoop Quads, the C287 is your go-to motor. Optimized for Different Applications: 1750KV Variant: Ideal for CineLifter X8 with 7-inch props, operating at 6S, perfect for traditional cinematic shoots. 1350KV Variant: Suited for high-speed cinematic shooting like motorcycle races, compatible with 7-inch props at 6S. Choose bewtween 1350KV is for 7inch props @6S of speed cinematic shooting (such as motorcycle race) 1750KV is for cinelifter X8 7inch props @6S of cinematic shooting Specifications Configuration: 12N14P with N52H arc magnets for optimal torque and response. Stator Size: 2807.5 for a balanced blend of power and efficiency. Motor Mounting hole size: 4*M3 (Φ19mm) Cables: AWG 18#, 260MM Dimensions (Dia *Len): Φ32.9*34.5MM / M5 shaft Weight: 47g (excluding 180MM cables). Power Capabilities: Can achieve over 2.8KG thrust with a max current of about 63A. In the Box 1x C287 Motor Various Screws. Additional Accessories: 1 O-ring and 1 Washer for secure and stable setup. T he Axisflying C287 Cinematic Motor is more than just a component; it's a game-changer in the world of FPV cinematic filming. Its blend of power, efficiency, and versatility makes it a top choice for pilots who are serious about capturing breath-taking aerial footage. Ready to revolutionize your FPV experience? The C287 Cinematic Motor awaits your command.

Read more less

Axisflying C155 FPV Brushless Motor – Precision Power for 2.5″–3.5″ Cinewhoops The Axisflying C155 FPV Brushless Motor is built for creators who fly like artists and crash like scientists. Tailored for 2.5-inch and 3.5-inch cinewhoops and cinematic FPV drones, it blends buttery smooth throttle response with enough torque to lift your GoPro without cooking your ESCs. Lightweight, balanced, and quieter than your post-crash cursing — this is the motor your reels and gimbals deserve. Why You Want It Because smooth footage shouldn’t require witchcraft. The C155 delivers premium Axisflying engineering with precise stator design and dynamic balance that kills jello dead. Ideal for cinewhoops, cruisers, and indoor cinematic rigs, it offers stable low-end control and punchy mid-throttle authority. In short: cinematic calm when you want it, rip-mode torque when you don’t. Bonus — it looks so good you’ll forget to hide your wiring mess. Specifications Stator Size: 15×5 mm (C155 — the Goldilocks zone for cinewhoops) KV Options: 4800kV Input Voltage: 3 S – 4 S LiPo (cinematic flexibility, no smoke) Mounting Pattern: 9×9 mm M2 screws (standard cinewhoop fit) Shaft Diameter: 1.5 mm (secure grip, zero slip) Weight: ≈ 11.2 g (because every gram counts on whoops) Bearings: Japanese NSK precision (buttery smooth rotation guaranteed) Prop Compatibility: 2.5–3.5 inch props (freestyle or cinematic, your call) What’s in the Box* 1× Axisflying C155 FPV Brushless Motor Still Here? You clearly know your stators from your smoke. Add the Axisflying C155 FPV motor to your next build and enjoy gimbal-grade smoothness without the bulk. Perfect for 2.5″ or 3.5″ cinewhoops chasing that cinematic FPV magic — just remember, footage this clean might make your editing look lazy.

Read more less

Please Note this is the 4S, 3500KV version motor!!! Experience the New Benchmark in Cinematic FPV Flight: The Axisflying C204 Motor Discover the future of cinematic FPV flying with the latest innovation from Axisflying - the C204 Motor, a component of our renowned C series, expertly crafted for the discerning Cinematic FPV pilot. Tailored for those who pursue excellence in every frame, the C204 Motor is your ideal partner in capturing breathtaking aerial footage. Unleash Your Cinematic Vision with Precision Engineering The C204 Motor is more than just a component; it's a gateway to unparalleled cinematic expression. Designed specifically for 3-inch cinewhoops and drones demanding high power and torque, the C204 also excels in 3.5-inch cinewhoops for cruising flight. This motor is optimized for peak performance with Gemfan D76-5 and D90-3 propellers, ensuring your footage is as smooth as it is stunning. Innovative Bearing Shield Technology (BST) The C204 Motor isn't just about power; it's also about longevity and reliability. With an IP53 rating, the motor boasts a dustproof and waterproof bearing placement design. BST shields your motor from environmental elements, enhancing thrust efficiency and extending the bearing's lifespan. Technical Specifications: 3500 KV is for 4S Motor Configuration: 12N14P with N52H arc magnets. Stator Size: 2004. Mounting Hole Pattern: 4*M2 (Φ12mm). Motor Cables: AWG 20#, 150MM. Dimensions (Dia *Len): Φ26.9*28.8MM. Weight: 15g (excluding 150MM cables). Peak Performance: Over 0.85KG thrust, with an average current of about 25A. What's Included in the Box: 1x C204 Motor. Various Motor Screws. Elevate your cinematic FPV experience with the Axisflying C204 Motor, where every detail is engineered for perfection, ensuring your flights are as extraordinary as your visions.

Read more less

DJI O4 Lite Camera Case (14mm) - Protect Your FPV Vision Keep your DJI O4 Lite Camera safe and secure with this precision-engineered 14mm protective case . Designed to shield your lens and housing from impacts, dust, and debris , this lightweight yet durable case ensures that your FPV system stays in top condition, no matter how intense your flights get. Why Choose This DJI O4 Lite Camera Case? ✔ Perfect Fit for DJI O4 Lite (14mm) - Designed specifically to snugly house your O4 Lite camera. ✔ Lightweight & Durable - Provides protection without adding unnecessary weight to your quad. ✔ Impact-Resistant Construction - Helps reduce damage from crashes, hard landings, and rogue tree branches . ✔ Easy Installation - Securely mounts in seconds for a hassle-free fit. ✔ Keeps Your Lens Clean - Shields against dust, dirt, and scratches for crystal-clear FPV footage . Specifications: Compatibility: DJI O4 Lite Camera (14mm variant) Material: 6061 Aluminum Weight: Ultra-lightweight design Mounting: Secure snap-fit installation What's in the Box? 1 x DJI O4 Lite Camera Case (14mm) 1 x Mounting Hardware Set (varies based on supply) ⚠ Disclaimer: Included accessories may vary based on stock availability.

Read more less

Axisflying Manta 30 DJI O4 HD 3″ FPV Drone (PNP / ELRS + GPS) Meet the **Manta 30** — Axisflying’s 3-inch high-performance quad built around DJI O4 digital video and flexible RX options. Whether you're rocking **PNP + GPS** or **ELRS + GPS**, this rig comes ready to shred gaps, climb fast, and bring you back in one piece. Full carbon frame, stout 4 mm arms, and the latest AIO brain make this more tool than toy. (Yes, we’re selling it, because rent.) Why You Want It If your current rig’s footage looks like thermal vision and your receiver drops mid-flare, the Manta 30 is your comeback. The DJI O4 system gives you crisp 1080p video with ultra-low latency. The **PNP + GPS** version plays nice with DJI RC systems and has return-to-home safety. The **ELRS + GPS** variant gives you freedom, low latency, and choice of frequency. Under 225 g dry weight means you can push hard without feeling sluggish. Tough frame, clean integration, and no half-measures. Yep, we’re selling quads now. The Manta 30 PNP + GPS gives you DJI O4 HD + return-to-home safety in a 225 g frame. Fly deeper, risk less—add it before someone else claims your gaps. Specifications Wheelbase / Frame: 160 mm Manta 3″ design with thick 4 mm carbon arms  Flight Electronics: Axisflying Argus F745 AIO (with 55A ESC / 4-in-1)  Motors: C204 2650 KV (optimized for 6S / 3″ props)  Prop Type: 3-inch (tri-blade typical) Video System: DJI O4 Air Unit (digital HD / 60 MHz / 1080p @ up to 100 fps)  Receiver Options: — PNP + GPS (using DJI RC link) or — ELRS + GPS (using your ELRS radio) GPS Module: Pre-installed option available for RTH and telemetry features  Dry Weight: ~ 225 g (±10 g) Battery Port: XT60 (6S support)  Recommended Battery: 6S 650–850 mAh LiHV (for optimal balance of performance & flight time)  What’s in the Box* 1× Axisflying Manta 30 FPV Drone (your choice of PNP + GPS or ELRS + GPS) 1× DJI O4 Air Unit (integrated) with camera & coax wiring 1× Set of 3" propellers (CW & CCW) 1× XT60 battery strap + hardware pack 1× Manual & accessories (screws, standoffs, etc.) Disclaimer “PNP + GPS” or “ELRS + GPS” refers only to the receiver & GPS configuration. Battery and remote controller are not included (we’re not magicians). Always double-check your version before you bind. Still Here? If you’ve read this far, you’re already imagining the next gap. The Manta 30 DJI O4 (PNP + GPS or ELRS + GPS) gives you HD clarity, strong build, and the option to choose your link. Add it to your cart before someone else snatches the version you wanted.

Read more less

6 in 1 USB-C Hub Plug Play: This 6-Port Laptop USB-C Multiport Adapter (2 USB 3.0 ports, 1 HDMI port, 1 Power Delivery charging port, 1 SD card reader, 1 TF card reader). Plug and Play, no additional software and drivers required. Full HD 4K HDMI to USB C Hub: Mirror or extend the screen of your Type C device with 4K video at 30Hz HDMI output to HDTV, monitor or projectors. USB 3.0 Hub: 2 USB 3.0 ports support transfer rates up to 5Gbps, which saves you much time transferring data, pictures, or movies from your external drives to your laptop. 100W PD Docking: This hub's USB-C power delivery port provides up to 100W of power, so your laptop charges at high speed while using all the other hub functions . Please make sure the USB-C port of your device supports charging function. USB C SD / TF Adapter: This USB C dongle is made of durable aluminium alloy at a small pocket size, 5.1 x 1.1 x 0.44 inch. Compatible with SD and TF cards with capacities up to 2TB. Portable and heat resistant design is ideal for use at home, at work, or on the go.   With high cost-effective, this dual display USB C hub will bring you a whole new expansion experience of working or entertainment. All functions support simple plug -and -play.Unforgettable Clear Dual Display  Ultra HD Resolution: Absolutely more efficient and cosy for you to have such crystal picture and video up to 3840*2160/30Hz HDMI.Smooth and Vivid 4KThe HDMI port offers you full HD 4K display at 30Hz to a larger screen. Support both mirror and extend mode on Windows and macOS systems. 2*USB 3.0 transfer5Gbps fast speed, loading files, music, pictures or movies in almost seconds, reduce your time of waiting. 100W Fast ChargingWith such a versatile hub, you can also obtain a 100W PD charge port, supporting for host and 2 USB 3.0 port, convenient for smart watch or phone. SD/TF card readerThe universal card reader could also be a powerful function for video blogger and internet celebrity. Support different formats. Specifications:  2 * USB 3.0 port: data transfer speed: up to 5 Gbps  1 HDMI 4K port: up to 4K UHD (3840*2160 at 30 Hz)  1 * SD card slot: Supported memory card capacity: up to 2 TB  1 * TF cards slot: Reading speed/writing: up to 104 MB/s  1 * USB type C Female Charging PD 3.0: only for loading type C laptop or type C smartphone. Input power 20v/5a  Combability List(not all):  MacBook Pro (2021 / 2020 / 2019 / 2018 / 2017 / 2016)  MacBook Air (2021/ 2020 / 2019 / 2018 )  iPad Pro（2021 / 2020 / 2018）  Pixel Book (2019 / 2018 / 2017)  Dell XPS / Lenovo  HUAWEI Matebook X Pro 2020, Mate 20, Mate 20 Pro, Mate 10, Mate 10 Pro, P30, P30 Pro, P20, P20 Pro  Surface Pro 8, Surface pro 7, Surface pro X, Surface laptop 3. Surface Go 2, Surface Go, Surface Book 2, Surface Book 3  Samsung Galaxy Tab S7+/S7/S6 Lite/S6/S5e、Galaxy S21、S20、S20+、S10、S10+、S9、S9+、S8、S8+、Note 10、Note 10+、Note 9、Note 8

Read more less

Unleash your passion for flight with the AzurePower Dare To Scream Sticker! This brand-new, high-quality decal is the perfect way to personalize your drone, laptop, or any surface that could use a touch of aviation enthusiasm. Crafted for fans of AzurePower propellers, this vibrant sticker not only shows off your love for the brand but also your commitment to the drone community. With its durable adhesive backing, the sticker applies smoothly and stays put through your daily adventures. Whether you're at a meet-up with fellow drone enthusiasts or simply want to add some flair to your gear, the Dare To Scream Sticker is an excellent choice for expressing your daring spirit. Get it now from our bargain bin and make a bold statement without breaking the bank! ⚠️ This item is sold "as is". We will not offer any additional support for this directly. You are welcome to contact the manufacturer for further support, but this will be at their discretion and may require you to ship the goods directly to their factory. You will have 7 days to return the item as a change of mind return, assuming it is in the same condition you received it in (We will not refund shipping costs). While we try our accurately describe it as is, please note that we have not completed a complete evaluation of this product to confirm every feature, and function of this unit works. Please note that original parts/accessories may be missing, unless we explicitly mention in this description that they are included. Please understand and consider this before deciding to buy a bargain bin item.

Read more less

Open-Box, new item [Heavy Duty Backdrop Stand] The aluminum alloy backdrop stand with 35mm diameter crossbar and load-bearing capacity up to 15kg, it is stronger and more durable than ordinary ones. Easy to create professional-quality photo backgrounds. [Adjustable Photo Booth Stand] The width can be connected by a four-part crossbar, adjustable from MIN 1.8m/6ft - MAX 3.6m/12ft. Double spring cushion stand for more stability. Height adjustable MIN 1.1m/3.7ft - MAX 3m/10ft. [Useful Spring Clamps] Comes with 2 heavy-duty clamps that grip and stretch the background tightly, hold seamless paper, canvas, muslin and other backgrounds you need. Need more clamps, please search ASIN: B01G0AAEOK [Easy to Use] Portable background support system is suitable for family gatherings, video shooting, weddings, as well as for professional photography or parties Whether indoors or outdoors, no other additional hardware is required and can be assembled by one person. [What You Will Get] The photography backdrop stand kit includes: 2x10ft Adjustable Support Stand, 4x3ft Adjustable Cross Bar, 2x4.5inch Heavy Duty Spring Clamp, 1xConvenient Carrying Bag. Looking for more great deals on camera and photography accessories? 📸✨ Check out our full collection here: Cameras & Photography and find everything you need!

Read more less

Open-box, new item (was assembled) NOTE: Comes without white screen [Stable Backdrop Support System] Suitable for various photography purposes such as video recording, television broadcasting, portrait/product photography, and more [Adjustable Backdrop Stand Kit] Easy to assemble background frame with adjustable height (0.9m/3ft to 2.6m/8.5ft) and width (1.5m/5ft to 3m/10ft) for versatile use [Heavy Duty Spring Clamps] The Clamp is made of strong and durable nylon, with a sturdy spring and a rough surface that allows it to hold anything tightly in place， and effectively prevents slippage. Complete set with 2 support frames, 4 crossbars, 2 spring clamps, and 1 carry bag for easy storage and transportation Looking for more great deals on camera and photography accessories? 📸✨ Check out our full collection here: Cameras & Photography and find everything you need!

Read more less