Products

TBS Lucid H7 FC - Your Drone's New Brain on Steroids Push your drone to its limits with the TBS Lucid H7 FC —a flight controller built for high-octane performance and unparalleled flexibility. With a lightning-fast 480MHz processor and dual gyro sensors, this FC is engineered for everything from freestyle maneuvers to precision racing. Whether you're rocking Betaflight, ArduPilot, or INAV, the Lucid H7 has your back. Plus, with dual camera inputs, DJI FPV OSD support, and seamless compatibility with modern peripherals, this compact powerhouse fits snugly into any build. If you're the type who thinks "stock settings" is a dirty phrase, the Lucid H7 will make your tuning dreams come true. Key Features and Specifications Processing and Memory MCU: STM32H743VIH6 running at 480MHz with 1MB RAM and 2MB Flash Gyro: Dual ICM42688 sensors for precise data tracking Barometer: Infineon DPS310 (I2C2) Connectivity and Interfaces UARTs: Seven total, ready for signal inversion (ports 1, 2, 3, 4, 6, 7, 8) CAN Bus: One available for advanced peripherals I2C Buses: Two accessible USB Interface: USB Type-C for hassle-free connections Power and Output Input Voltage: 6-36V (2-8S LiPo) BEC Outputs: 5V @ 2A (3A max) and 9V @ 2A (3A max) ADC Voltage Support: Up to 36V with a 1K:10K voltage divider Extras and Design Dual Camera Inputs: Easily switch between two camera feeds DJI FPV OSD: Fully compatible via spare UART LED Indicators: Blue (FC Status), Green (FC Status), Red (3.3V Power) What's in the Box 1 x TBS Lucid H7 FC 1 x FC-to-ESC cable (plug & play) 1 x DJI O3 cable (plug & play) 4 x M3 rubber dampers 4 x M3x8 screws Disclaimer: Accessories and connectors may vary depending on stock availability.

Read more less

TBS Lucid H7 Stack 8S 60A: The Ultimate FPV Flight Control and ESC System Take your drone builds to the next level with the TBS Lucid H7 Stack , a powerful combination of a lightning-fast STM32H743VIH6 flight controller and a durable 8S ESC system. Designed for demanding pilots, this stack delivers unmatched control, stability, and efficiency, even in high-performance FPV racing and freestyle environments. Flight Controller (FC) Features Processor: STM32H743VIH6 running at a blazing 480MHz. Dual Gyros: Equipped with 2x ICM42688 for unparalleled precision. OSD: AT7456E chip for clean, crisp visuals. Barometer: Infineon DPS310 for accurate altitude readings. PWM Outputs: 13 channels, including a dedicated LED pad for RGB magic. Blackbox: MicroSD slot for detailed flight data logging. Connectivity: UARTs: 7 ports ready for signal inversion. I2C Buses: 2 available. CAN Bus: Fully supported. Camera Input: Switchable dual-camera support. Power Control: Filtered 5V/Vbat switch ensures stable power output. Indicators: Tri-color LED feedback for quick diagnostics. USB Port: Type-C for easy configuration. Electronic Speed Controller (ESC) Specifications Rated Current: 70A per motor for 60 seconds. Peak Current: 85A bursts for 30 seconds. ESC Software: Runs on AlkaMotors32 (AM32). Input Power: 3-8S LiPo compatibility. Protocol: Bi-directional DShot 300/600 with KISS ESC Telemetry. Propeller Compatibility: Supports up to 11" props (ensure good airflow for sizes over 7"). Mounting Options: Gorilla Mount (39.5 x 16.0mm). Standard 30.5x30.5mm with adapters for 20x20mm frames. Weight: Just 17.58g (22g with brackets). What's in the Box? 1x TBS Lucid H7 Flight Controller. 1x 8S 4-in-1 ESC. Mounting hardware including Gorilla brackets for frame compatibility. Cables and connectors for installation. Note: Accessories may vary based on supply. Gorilla mounting pattern Frame developer pack for Gorilla mounting pattern AM32 Online Configurator AM32 Firmware TBS Lucid Manual

Read more less

TBS Lucid H7 Wing Flight Controller Let's be real. You're not building a foamie to just potter around the park. You're building a serious, long-range fixed-wing aircraft, and the last thing you need is a flight controller that runs out of processing power or, heaven forbid, UARTs. Enter the TBS Lucid H7 Wing FC. This is the brain Team BlackSheep built for pilots who run ArduPilot with complex scripts, demand dual-gyro redundancy, and want enough connectivity to launch a small satellite. It's overkill for most, but for you, it's the bare minimum. Why You Want It This is peace of mind, etched in silicon and solder mask. The ridiculously powerful STM32H7 processor, running at a blistering 480MHz, ensures that even the most demanding ArduPilot or INAV setups run flawlessly. The dual gyros mean a sensor failure won't send your £1000 build into an unrecoverable death spiral. With a beastly BEC system ready for 3-12S input and enough ports to connect every conceivable gadget, this is the last wing flight controller you'll need to buy for a very long time. It’s an investment in not having to pick up a bin bag full of carbon fibre and regret. Features and Highlights A Processor with Ludicrous Speed: The 480MHz STM32H743 MCU has enough horsepower to calculate your complex flight path, manage your peripherals, and still have cycles to spare. Dual Gyro Redundancy: Featuring two ICM42688 gyros. If one decides to take an unscheduled holiday mid-flight, the other is ready to take over. Because gravity is relentless. Power It With Anything: A massive 3-12S input range and a selectable 8A/10A main BEC means you can power massive servos and peripherals without a second thought. Connect Literally Everything: With 13 PWM outputs, 7 UARTs, a CAN bus port, dual I2C, and 6 ADC inputs, you will run out of things to connect before you run out of ports. FPV System Agnostic: Perfect for analog pilots with its dual camera switching and beefy 5A VTX BEC. Perfect for digital pilots with its dedicated DJI-style connector. You choose. Built for Builders: This FC arrives with its header pins unsoldered. This isn't a flaw; it's a feature. It gives you the freedom to create the clean, custom, direct-soldered build your aircraft deserves. Ardupilot Wiki Info Full Specifications Core Components MCU: STM32H743VIH6, 480MHz, 2MB Flash Gyros: 2x ICM42688 (SPI1 & SPI4) Barometer: DPS310 (I2C2) OSD Chip: AT7456E BlackBox: MicroSD card slot Power System Input Voltage: 8V - 50.4V (3S - 12S LiPo) Main BEC: 8A continuous / 10A peak (Selectable 5V, 6V, 8.4V output for servos) FC BEC: 5V @ 3A continuous (For the FC and essential peripherals) FPV BEC: 5A continuous (Selectable 9V or 12V for VTX and camera) Current Sensor: 165A continuous / 240A peak Connectivity PWM Outputs: 13 (including LED) UARTs: 7 I2C Ports: 2 CAN Bus Port: 1 ADC Inputs: 6 (Vbat, Current, CB2, CU2, RSSI, AirSpeed) FPV Inputs: 2 switchable analog camera inputs Digital FPV: "DJI"-style connector with SBUS and OSD communication Physical Dimensions: 54 x 36 x 13 mm The Nitty-Gritty Setup Details Battery Voltage Sensor: 1K:20K Resistor Divider (Set Scale to 2100 in INAV, or BATT_VOLT_MULT to 21.0 in ArduPilot) ADC VB2 Voltage Divider: 1K:20K ADC AirSpeed Voltage Divider: 20K:20K ArduPilot Target: TBS_LUCID_H7_WING INAV Target: TBA (Coming Soon!) Betaflight Target: TBA (But why would you?) What's in the Box* 1x TBS Lucid H7 Wing FC & PDB (sandwiched boards) 1x USB (Type-C) / Buzzer Extender Board 1x 10cm JST-SH-6P Cable (for USB Extender) 1x 25cm JST-SH-6P Cable (for HD Systems like DJI) 2x 20cm JST-GH-4P Cable (for CAN & I2C) 1x 330uF 63V Electrolytic Capacitor 120x 2.54mm Pin Headers (pointy end goes in the hole, hot end of the iron goes on the pin) Disclaimer *TBS provides the cutting-edge hardware. Your ability to solder without creating a short circuit that blacks out the entire neighbourhood is entirely on you. Still Here? Good grief, you actually read every last spec. You're not just building a plane; you're building a private UAV with an existential purpose. This is, without a doubt, the best flight controller for ArduPlane you can get your hands on today. It has the power, the redundancy, and the legendary TBS quality you need. Stop staring at the specs and add it to your basket. Your masterpiece of a wing is waiting for its brain.

Read more less

Dive into the realm of FPV drones with the TBS M10 GPS GLONASS Module, your ultimate sidekick for not getting utterly lost while navigating the skies (because, let's face it, asking for directions mid-flight is a bit of a challenge). Equipped with the ublox UBX-M10050 chipset, this little wizard ensures that your drone knows where it's at, even when you don't. Let's break down the specs in a way that won't have you snoozing: Chipset Enchantment: ublox UBX-M10050, because only the best for your high-flying escapades. Memory Skills: Flash memory onboard to remember your configurations, because who has time to reset every time? Frequency Finesse: L1, 1575.42MHz; L2,1561.10MHZ; L3,1602.00MHZ - it's like tuning into your favorite radio station, but for precise locations. Baud Rate Brio: 4800bps-921600bps. Default at 38400bps - faster than your drone's gossip about the neighboring quadcopters. Sensitivity Saga: Tracking at -166dBm, Capture at -160dBm, and a Cold Start at -148dBm - because this module is more sensitive to its surroundings than a teenager to criticism. Start-Up Speeds: Cold, Warm, and Hot starts faster than you can say "Where the heck am I?". Accuracy Acumen: Autonomous <2m average, because approximations are for horseshoes and hand grenades, not drone flying. Maximums Madness: Altitude, speed, and acceleration limits that laugh in the face of gravity. Refresh Rate Rave: 0.25Hz-18Hz. Because who doesn't love options? Tiny but Mighty: 18 x 18 x 6.1 mm and weighs less than a paperclip (4.9g, to be exact). Power Prowess: Just 5V. It's low-maintenance, just like your ideal date. In the Box: 1 x TBS M10 GPS GLONASS Module 1 x "Where Am I?" Quick Start Guide A newfound sense of location confidence (priceless) Whether you're dodging trees or navigating through the urban jungle, the TBS M10 is your not-so-secret weapon for keeping your drone in the know, so you can focus on the flying (and the fun). Get your hands on this GPS module and elevate your FPV drone experience from "Where are we?" to "Here we are!".

Read more less

TBS M10N Multi-GNSS GPS Module Finally, a GPS module that doesn’t make your quad feel like it’s navigating with a blindfold and a paper map. The M10050 packs GPS, BDS, Galileo, QZSS, and SBAS support into a 3-gram, matchbox-sized brain. Translation: it’ll lock satellites faster than your flying buddy can say “where am I?”. Bonus points for surviving -40°C winters and +85°C soldering-iron-left-on-the-bench summers. Why You Want It Because “close enough” isn’t what you want to hear when your £500 rig is somewhere in a field. With 2.0 m CEP horizontal accuracy and 0.05 m/s velocity precision, this thing nails position like Bardwell nails tutorial pacing. And yes, we profit off your paranoia about flyaways — but you’ll thank us when you’re not climbing a tree at 11 pm. Specifications Chip: M10050 (the tiny genius inside) Receiver Type: GPS, QZSS, BDS, Galileo, SBAS (basically a UN summit in silicon) Default Systems: GPS, BDS, Galileo Sensitivity: -166 dBm tracking (hears satellites whispering) Accuracy: 2.0 m CEP position, 0.05 m/s velocity, 0.3° heading (your ex wishes they were this precise) Acquisition: 27 s cold, 1 s hot (coffee-level wake-up times) Data Output: 4800–921600 bps (default 115200), NMEA + UBX protocols Update Rate: 0.25–18 Hz (default 10 Hz — smooth tracking, not seizure mode) Memory: FLASH config retention (no amnesia after battery pull) Limits: 80,000 m altitude, 500 m/s velocity (rocket-class bragging rights) Power: 3.6–5.5 V input, 15 mA typical (your LiPo won’t even notice) Size: 16.5 × 12.3 × 6.0 mm (smaller than your patience) Weight: 3 g (aka negligible) Connector: 1.00 mm 4-pin (don’t lose the cable, seriously) Temperature Range: -40°C to +85°C operating (yes, even in UK winters) Indicator: PPS LED flashes blue when locked (instant pilot serotonin) What’s in the Box* 1× M10050 GNSS Module 1× Blue LED that validates your life choices Disclaimer Accessories may vary, but the tiny 3-gram GPS wizard is always included — no, we don’t supply lost-quad insurance. Still Here? Congrats, you actually read specs longer than your ESC manual. Here’s your prize: this GNSS GPS module is ideal for FPV drones, robotics, and anything needing reliable position tracking. If you’re still on the fence, just buy it now — or enjoy explaining “flyaway mode” to your mates later.

Read more less

Unleash Next-Generation Navigation with the ublox UBX-M10050 Chipset Embark on a journey of unmatched accuracy and efficiency with the TBS M10Q GPS GLONASS. Equipped with the formidable ublox UBX-M10050 chipset, this powerhouse of a GPS module does more than just point north. It's like having a mini-supercomputer guiding you through the shortest queues at the coffee shop! Triple Frequency for Triple the Fun Who needs a simple dual-band GPS when you can have triple frequencies? With L1 at 1575.42 MHz, L2 at 1561.10 MHz, and L3 at 1602.00 MHz, this device ensures you're never lost, even if you find yourself in the Bermuda Triangle. Speedy Starts and Stellar Sensitivity Forget the days of staring at your device waiting for a signal. The TBS M10Q boasts a hot start time of approximately 1 second — yes, almost as fast as your reaction to a dropped ice cream. With tracking sensitivity at -166dBm and a cold start of merely 26 seconds, it's ready faster than you can say "Where am I?" Pinpoint Precision Navigate with confidence as the TBS M10Q delivers stunning horizontal position accuracy under 2 meters. Whether you're hiking, flying, or diving (okay, maybe not diving), it keeps you on track. And with a timepulse signal accuracy of RMS 30 ns, even time travelers would nod in approval. Built for the Bold This module isn't just about getting you from point A to B. It thrives up to a maximum height of 50,000 meters — where eagles dare. And with a top speed of 500 m/s and a max acceleration of ≤ 4G, it's virtually unshakeable, no matter the adventure. Compact, Yet Mighty With dimensions of merely 25 x 25 x 7.7 mm and weighing in at a featherlight 13.5 grams, the TBS M10Q could very well be mistaken for a postage stamp that knows exactly where it's going. Energy Efficient Running on a mere 5V input voltage and with a configurable refresh rate from 0.25Hz to 18Hz, this GPS module is as energy-efficient as it gets. It's like having an eco-friendly co-pilot. Magnetic Personality Not to forget, it includes a built-in QMC5883 magnetometer, because why not add a compass into the mix? It's like the cherry on top of this navigational sundae. Optimize your travels, elevate your adventures, and never get lost (unless you want to) with the TBS M10Q GPS GLONASS. Where will it take you next? Specifications Chipset - ublox UBX-M10050 Flash memory for saving configuration. Frequency - L1, 1575.42MHz ; L2,1561.10MHZ；L3,1602.00MHZ Baud Rate - 4800bps-921600bps, default 115200bps Channel - N/a Sensitivity - (Tracking: -166dBm) | (Capture: -160dBm) | (Cold Start - 148dBm) Cold start - Average 26 seconds Warm start - Average 24 seconds Hot start - Average 1 second Accuracy - (HorizontalPosition:Autonomous<2m average) | (SBAS < 2.0m average) | (Timepulse signal: RMS 30 ns) Maximum height - 50000m Maximum speed - 500 m/s Maximum acceleration - ≦ 4G Refresh Rate - 0.25Hz-18Hz, default 1Hz Size - 25 x 25 x 7.7mm Weight - 13.5g Input Voltage - 5V Magnetometer: QMC5883 Included 1x TBS M10Q GPS GLONASS

Read more less

TBS Mojito FPV Flying Wing - High-Speed Efficiency Meets Ultimate Endurance The TBS Mojito is not just another FPV wing—it's an aerodynamic masterpiece engineered for maximum efficiency and speed . With a forward-swept design , this high-performance FPV flying wing slices through the sky at speeds exceeding 200 km/h (125 mph) while cruising comfortably at 90-120 km/h (60-75 mph) on minimal power. That means longer flights, greater distances , and rock-solid tracking —perfect for pilots who want precision without compromise. And when you're done shredding the sky? The quick-release three-piece design lets you pack it up in seconds. Whether you're an FPV racer, long-range explorer, or just a speed demon  , the Mojito outperforms anything in its class. Optimized for Analog & Digital FPV Systems Designed for both analog and digital FPV setups , the Mojito supports a variety of cameras and video systems . Free 3D print files are available for front noses and camera mounts, so you can customize your setup with ease. Aerodynamic Excellence - Designed for Pure Speed High-Efficiency Airfoil: Inspired by dynamic soaring gliders, built for extreme endurance. Minimal Drag: All control surfaces and electronics are internally housed for a streamlined profile. Injection-Molded Leading & Trailing Edges: Optimized airflow for precise handling. High-Density Foam Construction: Ultra-thin airfoil cuts through the sky effortlessly. Optional Airbrake Servos: Enables pinpoint landing accuracy. Built to Last - And Easy to Customize 90% Pre-Assembled Kit: Get flying in no time—just install electronics and optional LED strips. DIY Version for Enthusiasts: Fuselage and wings arrive as separate halves for total customization. Premium Materials: Engineered with top-tier components for minimal build tolerances. Modular Plastic Components: Leading edge covers and stabilizers are removable for LED integration. What's in the Box? TBS Mojito flying wing pre-assembled 2 servos installed for elevons TBS Mojito sticker sheet Carbon fiber reinforcement strips ⚠ Disclaimer: Accessories and included parts may vary depending on supply. Motors/props and other electronics shown in photos are not included. Manual 3D Print TPU Nosecone 3D Print TPU O3/O4 Mount 3D File Nose (blank) iNav CLI suggestions

Read more less

The TBS MPM, designed in collaboration with RadioMaster, features the four main RF chipsets (CC2500, NRF24L01, A7105 and CYRF6936) all integrated in a single product. Thanks to OpenSource developers, compatibility with most common R/C protocols is provided through a single module, powered by OpenTX / FreedomTX. With an integrated RF amplifier, the module provides competitive range. Specifications Input voltage: 6-9v Current: ~100mA Operating frequency: 2.4GHz ISM band RF power: +20DBM (100mW) Main Chipset: STM32 Opensource Repo: Github Model compatibility: Alphabetical List (external) Firmware updatable via USB-C port

Read more less

Ethix Mr Steele Silk Motor V6 - White Gold Another year, another motor. But wait, this one's different. After a full decade of yeeting drones into the stratosphere (and occasionally, the dirt), Mr. Steele has distilled his wisdom into the Ethix Mr Steele Silk Motor V6. This isn't just another shiny part; it's the culmination of five generations of R&D for the perfect freestyle drone motor. If you're looking to upgrade your 5-inch build, you've stumbled into the right corner of the internet. Why You'll Want It Because you're tired of motors that scream like a banshee but deliver power like a wet noodle. Steele designed the V6 for one thing: ridiculously smooth and linear power delivery. It gives you the resolution to nail those tiny throttle corrections mid-gap, without the twitchiness that sends your quad into an unrecoverable death wobble. We're not saying it'll make you fly like Steele—that requires selling your soul—but it might just be the upgrade your wallet has been crying out for. Features and Highlights Motorsports-Inspired Bell: The new bell design isn't just for looking pretty on Instagram. It's modelled after a lightweight, high-durability motorsports wheel, meaning it can take a hit from a gate (or a tree, or the ground) and ask for more. Two Flavours of Fast: Choose your weapon. The 1750KV is Steele's personal choice for all-around silky freestyle on quads from 550-750g. The 1950KV is for those who need more grunt—perfect for heavier rigs, cinematic car chases, or just showing off at the park.  This listing is for the 1750KV version! Lightweight & Tough: Built to be as light as possible without sacrificing the durability needed for, let's face it, your inevitable "learning experiences." Less magic smoke, more flight time. Specifications Stator Size: 2306 (The sweet spot) KV Options: 1750KV Silky smooth Weight: ~31.5g with wire (Lighter than your sense of regret after that last crash) Prop Compatibility: Perfect for Ethix 5”/5.1” props, because synergy is a thing. Mounting Pattern: 16x16mm (Like, you know, everything else) What’s in the Box* 1x ETHIX Mr Steele Silk Motor V6 (The main event) 1x Prop Nut 4x Mounting Screws (The small bits you will definitely lose in the grass) Disclaimer *Box contents may vary slightly based on what the factory elves felt like including. The motor itself, however, is 100% guaranteed. Still Here? Good. About The Mr Steele V6 Motor... Look, you've read this far, so you're clearly a spec-nerd, and we respect that. You've seen the numbers, you've heard the spiel. This premium 2306 FPV motor is Steele's magnum opus for a reason: it's a lightweight, durable, and incredibly linear powerhouse designed for serious freestyle pilots. Stop deliberating over spec sheets and just add it to your basket. Your quad will thank you for it.

Read more less

This patch antenna is designed by the IBCrazy, one of the grandfathers of circular polarized antennas everyone uses for FPV flying today. Manufactured by team black sheep, this patch antenna has a gain of 5DBi and is designed to go onto your receiver unit. Typical range when coupled with a 200mW FPV transmitter you will be able to comfortably achieve 1.5Km of real world use (if compared to the same lab conditions as other antenna manufacturers use, this antenna can achieve 3-4Km range). Like with other TBS FPV antennas you can except this patch antenna to outperform many other existing circular polarized antennas. This antenna has a 110 degree beam width, tiny size and low weight allow you to still use this on your FPV goggles without a tracking antenna, while still achieving incredible range. This antenna is commonly used with the fatshark dominator FPV headset. Specifications of the TBS Patch Antenna: 5dBi Gain RHCP 5700 - 5900 MHz working frequency 110° beamwidth 35 x 35mm SMA or RP-SMA connector - your choice TBS pays a royalty to IBCrazy for each antenna sold!

Read more less

TBS Solder is spec'd accordingly to Chris Dunkel aka RiSCyD, Team BlackSheep's lead engineer. Easy to solder, plenty of flux to make sure it cures nice and looks professional. Specification Type: Leaded Tin/Lead: 63/37 Flux: 1.8% DIA: 0.8mm N.T: 100g

Read more less

TBS Solder is spec'd accordingly to Chris Dunkel aka RiSCyD, Team Black Sheep's lead engineer. Easy to solder, plenty of flux to make sure it cures nice and looks professional. Specification Type: Leaded Tin/Lead: 63/37 Flux: 1.8% DIA: 1.0mm N.T: 15g

Read more less

TBS Flux NC-559-ASM-UV 10CC No-Clean Soldering Flux Soldering without flux is like flying FPV without goggles — technically possible, but guaranteed to end badly. The TBS Flux NC-559-ASM-UV is the go-to no-clean soldering flux used by repair pros and builders who actually care about clean, solid joints. Packaged in a handy 10CC syringe with plunger and needle, it lets you dispense just the right amount, whether you’re fixing a pad the size of a breadcrumb or tinning fat power leads. And since it’s a no-clean formula, you can skip the whole “scrub the PCB” routine. Laziness has never looked so professional. Why You Want It Because cold solder joints are ugly, unreliable, and secretly judging you. This flux prevents oxidation, improves wetting, and gives your solder that smooth, glassy finish you’ve been pretending to achieve without help. Plus, it’s the same stuff used across the electronics repair industry — if it’s good enough for pros, it’s good enough for your shaky hands. Specifications Type: NC-559-ASM-UV (fancy letters, proven chemistry) Volume: 10CC syringe (includes plunger + needle) Formula: No-Clean (because you’ve got better things to do) What’s in the Box* 1× 10CC syringe of TBS Flux NC-559-ASM-UV 1× Plunger 1× Needle dispenser tip Disclaimer Yes, it’s no-clean — but if you drown your board in flux, don’t blame us when it looks like a crime scene. Still Here? You must really love reading about goo. Respect. The TBS NC-559-ASM-UV Flux makes soldering cleaner, faster, and way less frustrating — especially on delicate FPV builds. Grab a syringe now and make cold joints a thing of the past.

Read more less

You've invested in a primo digital VTX, but mounting it on carbon plates can be like inviting a bull into a china shop: dangerous and costly. Metal casings and carbon? They mix about as well as oil and water, my friend. We all know the FPV flying rulebook: metal touching carbon is the equivalent of sending a 'U Up?' text at 3 am—just don't do it. No one wants to be grounded or, worse, replacing expensive parts because of a rookie mistake. Introducing the TBS Source One V5 20x20 Insulation Mount Set . It's like a protective superhero cape for your VTX, but way cooler and less spandex. It fits your Source One v5 like a glove and, for other frames, just drill some 4mm holes and you're golden. Key Product Highlights 🔩 Built Like a Tank : Specifically designed for 20x20 digital VTX with metal casing. 🛡️ Safety First : With nylon-printed inserts to give complete insulation between metal and carbon. 🎯 Custom Fit : Fits the Source One V5 rear compartment perfectly. 🔧 DIY-Friendly : For other frames, you may need to unleash your inner handyman and drill some 4mm holes. 📦 Kit & Kaboodle : Comes complete with 1 Silicon insulating pad, 4 m2 x 20 screws, 4 3D printed nylon inserts, and 4 m2 locknuts. You no longer have to play Russian roulette with your electronics and carbon plates. The TBS Source One V5 20x20 Insulation Mount Set has got you covered, literally. What's in the Box 1 x Silicon insulating pad 4 x m2 x 20 screws 4 x 3D printed nylon insert 4 x m2 locknut

Read more less

Source One V5 Analog TPU Essentials Kit - Pimp Your Quad! So, you've got the legendary Source One V5 frame, but are your analog bits flapping in the breeze like a poorly pitched tent at a hurricane-themed music festival? Fear not, intrepid FPV pilot! Our Source One V5 Analog TPU Essentials Kit is here to bring some much-needed order and style to your build. Kiss those zip-tie nightmares goodbye and say hello to sleek, durable, and oh-so-functional 3D printed TPU parts. Tired of your VTX antenna flopping around more than a confused goldfish? Our robust SMA antenna mount will keep it pointing skywards (or wherever you intended, we don't judge your acro skills). Worried about your receiver antenna getting a surprise haircut from your props? The included rear-mounted RX T-antenna mount has got its back, literally. And let's not forget the unsung hero: the trusty XT60 connector mount . No more dangling power leads making your quad look like it's having a bad hair day. This mount keeps your power secure and tidy, because even drones deserve to look put-together. Crafted from tough-as-nails TPU, these parts are designed to take a beating - because let's be honest, "gentle landings" aren't always in the flight plan. They offer a snug fit for your Source One V5 analog setup, ensuring your gear stays protected and optimally positioned for peak performance. Perfect for pilots searching for "Source One V5 TPU parts," "FPV drone antenna mount," "XT60 holder for Source One," or "analog FPV upgrade kit." Why You'll Love It (Probably): Durable & Flexible: Made from high-quality TPU, ready to absorb those "unscheduled landings." Secure Mounting: Keeps your SMA antenna, RX T-antenna, and XT60 connector firmly in place. No more wobbly bits! Clean Builds: Achieve that pro-builder look without needing a degree in cable management. Optimized for Analog: Specifically designed for your Source One V5 analog FPV setup. Lightweight: Adds minimal weight, because every gram counts when you're defying gravity (or trying to). Specifications: Product: 3D Printed Part Kit for Source One V5 (Analog Setup) Material: TPU (Thermoplastic Polyurethane) Compatibility: Specifically designed for the TBS Source One V5 frame (Analog FPV builds) Color: Typically black, but hey, it's 3D printed, who knows what mood we're in? (Color may vary) What's In The Box (Prepare for mild excitement!): 1 x SMA Antenna Mount (TPU) 1 x XT60 Connector Mount (TPU) Disclaimer: Accessories, such as screws or cable ties, are not typically included. The exact design or bundled accessories (if any, by some miracle) may vary slightly based on material supply and our ongoing quest for caffeinated perfection. We do our best, okay? Stop letting your Source One look like an explosion in a wire factory. Upgrade to our TPU Essentials Kit and fly with the confidence that your analog bits are snug, secure, and stylishly mounted. Your quad will thank you (probably silently, it's a drone after all).

Read more less

Is your shiny new DJI O4 Lite Air Unit looking a bit lost on your Source One V5 frame? Are you resorting to creative (read: sketchy) methods to get that amazing O4 footage? We feel your pain. Put down the double-sided tape! This 3D printed mounting kit is your ticket to seamlessly integrating the DJI O4 Lite Air Unit and Camera onto your trusty TBS Source One V5 frame. Achieve that clean, professional build look while ensuring your cutting-edge digital FPV system is securely mounted. This kit bundles the key parts you need: bespoke mounts for the O4 Lite camera and air unit, a robust XT60 holder to prevent power lead mishaps, a dedicated antenna mount designed for the O4 system's needs, and a universal action camera mount. Because capturing those buttery smooth O4 flights is mandatory, right? Why This Kit Rocks: Perfect Fit: Tailored for the Source One V5 frame and DJI O4 Lite components. Tidy Builds: Ditch the wire nest and embrace organised FPV glory. All-Inclusive: Comes with mounts for your power plug, antenna, and action cam. Built Tough: Printed from resilient materials designed to withstand... enthusiastic landings. Specifications: Compatibility: TBS Source One V5 Frame, DJI O4 Lite Air Unit, DJI O4 Lite Camera Material: High-Quality 3D Printed TPU Colour: Black What's In The Box (Hopefully): 1 x DJI O4 Lite Camera Mount 1 x DJI O4 Lite Air Unit Mount Adapter 1 x Rear Antenna Mount 1 x XT60 Holder Bracket 1 x Universal Action Camera Base Mount These prints are based on the design xt60 mount and antenna mount by FPVADDICT318

Read more less

CNC aluminum neckstrap mount for the TBS Tango 2. Perfectly balances the remote and is compatible with most market neck straps (not included) Includes CNC Aluminum Neck Strap Mount Flat head M4.0 x 8mm screw Rubber O-Ring for zero play Downloads STL file for 3D Printing

Read more less

Pilots are unique in their own ways, mod your gear to match! Protect and look different, don't let someone mistakenly take your TX by accident. Spot it from far away and keep those nasty UV rays off. Express yourself with a wrap, everyone else is doing it!

Read more less