Products

For Tiny Whoops, small wings, or ducted drone applications, it can sometimes be beneficial to stick your antenna to get a very sleek profile. That's what the Flex Dipole is for. Not full range, but then again, you may not need that for these scenarios! Comes in a pack of 2pcs for the TBS Tracer Nano Rx / Nano 6ch Rx Specifications Element Length / Width: 45 mm / 6mm Total length: 120mm Connector: IPEX / u.FL Weight: 0.44g VSWR: < 2 Gain: 1dBi Includes 2x TBS Tracer Flex Dipole RX Antenna

Read more less

The default antenna included with the TBS Tracer is the Immortal T 2.4GHz antenna, manufactured by TBS. It is made from lightweight, multi-strand stainless steel wire in an injected rubber enclosure, RF balanced with a balun between active element and ground. The combination of weight, durability, expected range, and performance bar none with this antenna, and it is ideal for race and freestyle mini quad use. Specifications Cable length: 80mm Antenna width: 60mm Weight: 0.84g Gain: 2dBi VSWR: < 1.4 Expected range: Full range (15mi+/25km+ with TBS Tracer) Includes 1x TBS Tracer Immortal T Antenna

Read more less

In a race, microseconds count! Goggles down, thumbs up - are you ready for a true 250Hz radio link? End to end latency: barely noticeable. Nothing else comes close! Thanks to 2.4GHz technology, TBS took the best from Crossfire and shrunk it down to speed it up. The end result: Smaller antennas, more speed, and range for days. The TBS Tracer Nano TX Starter Kit comes with one TBS Tracer Nano TX, three TBS Tracer Nano RX, and six TBS Tracer Immortal T Antennas to give you lower latency and amazing range. INTRODUCING TBS TRACER - 2.4GHZ "CROSSFIRE" RADIO SYSTEM 250Hz: Fastest available radio and telemetry link Brand new 2.4GHz technology not found in any other radio link 3ms end to end latency Crossfire engine for ultimate compatibility and functionality "JR" and "LITE" form factor transmitters Nano-sized receiver with antenna diversity 15mi+/25km+ range For drones, planes, helicopters, cars, and boats THE FASTEST RADIO LINK In a race, microseconds count. Goggles down, thumbs up - are you ready for a two-way 250Hz radio link? End to end latency: basically zero (okay, 3ms!). Range: for days. Nothing comes close! We took the best from Crossfire and shrunk it down & sped it up. NOT JUST FOR RACE AND "FREERANGE" PILOTS A single operation mode satisfies all requirements. A spine-tingling 250Hz refresh rate. Plenty of penetration and range to outperform even the most serious video link. Full telemetry capability is standard, without any range of degradation! Thanks to Crossfire pedigree, drone pilots, traditional R/C pilots and everyone in between can instantly tap into the familiar lineup of compatible software, devices, remotes, and mounting boards. EASE OF USE OTA firmware updates, auto-bind, multi-bind, LUA device configuration such as flight controller PIDs, etc. and cloud connectivity: No problem! These are all features that TBS first brought into the R/C space with TBS Crossfire! All receivers arrive in binding mode and it remembers your bind across all of your radios, so the bind button is technically not needed ever. UNDER THE HOOD TBS Tracer runs on the Crossfire engine. Over 6 years of active development and by far the most popular R/C system for FPV enthusiasts! You instantly tap into the same reliability, features, and compatibility that drone pilots see as synonymous with peace of mind. So what's the difference? Higher update rate, lower latency, smaller antennas due to a higher frequency. Crossfire users will feel right at home! THE TBS GUARANTEE In over 10 years of TBS existence, software updates have always been free, continuous, and plenty. Hardware is built for longevity and comes packed with a great range of features that are yet to be unlocked. Support has always been laser-focused on customer satisfaction. For pilots, by pilots. It is the reason why TBS products have the largest following, and why investment into TBS Tracer will continue to pay dividends in the future - just like TBS Crossfire continues to do for all hobbyists. Features Long-range, adaptive and robust remote control system for your drone & aircraft Low latency, 250Hz update rate (5x faster than typical - world's fastest) for mind-blowing accuracy The two-way communication link with real-time link vitals and telemetry OTA firmware updates, auto-bind, multi-bind support TBS Cloud connectivity with telemetry output for smartphone apps Fully configurable by OpenTX and TBS TANGO remote using CRSF protocol "Unlimited" amount of people can fly at the same time Selectable RF power from 25mW to 1W (local restrictions apply) 8 or 12ch output via CRSF, SBUS, inverted SBUS, or PPM Serial Modem capable of transmitting MAVLink or other serial protocols (up & downlink) Specifications TBS TRACER NANO TX Latency & Refresh Rate: 3ms, 250Hz Output power: 25mW / 100mW Frequency Bands: 2.4GHz ISM Input Voltage: 3.5 - 13V Connector: USB-C Power consumption: 1.1W (@10mW) - 2W (@100mW) Dimensions: 65 x 48 x 22 mm (JR module size) Radio Compatibility: LITE module bay (e.g. TBS Tango 2, Taranis X-Lite, X9 Lite), OpenTX V2.1+. The TBS Tracer Nano TX is suggested for use in Futaba and Spektrum remotes that do not have a JR-module bay. * output power modes may not be available due to local regulation limitations TBS TRACER NANO RX Antnna ports: 2x u.FL / IPEX (diversity) Package contents: 1x TBS Tracer Nano RX, 2x Immortal-T, silicone cables Protocols: 2x CRSF, SBUS, PPM, 6x PWM, SmartAudio 2.0 / 2.1 (VTx Control) Weight: 0.5g (receiver only) Size: 11mm x 18mm Includes 1 x TBS Tracer Nano TX 3 x TBS Tracer Nano RX 6 x TBS Tracer Immortal T Antenna Downloads TBS Tracer Manual TBS Agent X (for software updates) Latest OpenTX LUA Scripts for Crossfire TBS Cloud - Wifi Firmware OpenTX Nightly Firmware

Read more less

The Tracer Nano TX by TBS is the next generation of Crossfire technology! Tracer technology utilizes a 250Hz radio link sent through 2.4GHz technology which provides 3ms end to end latency - giving you the fastest radio link out there. Get range for days, faster connection, and best results with TBS Tracer. Features 250Hz: Fastest available radio and telemetry link Brand new 2.4GHz technology not found in any other radio link 3ms end to end latency Crossfire engine for ultimate compatibility and functionality "JR" and "LITE" form factor transmitters Nano-sized receiver with antenna diversity 15mi+/25km+ range For drones, planes, helicopters, cars, and boats Specifications Latency & Refresh Rate: 3ms, 250Hz Output power: 25mW / 100mW Frequency Bands: 2.4GHz ISM Input Voltage: 5V - 9V Connector: USB-C Power consumption: 1.1W (@10mW) - 2W (@100mW) Dimensions: 65 x 48 x 22 mm (JR module size) Radio Compatibility: Lite module bay (e.g. TBS Tango 2, Taranis X-Lite, X9 Lite), OpenTX V2.1+. The TBS Tracer Nano TX is suggested for use in Futaba and Spektrum remotes that do not have a JR-module bay * output power modes may not be available due to local regulation limitations Includes 1 x TBS Tracer Nano TX

Read more less

For more challenging installations where performance is crucial (such as long-range foam planes), we recommend this 2.4GHz sleeve dipole antenna for the TBS Tracer receivers. They are lightweight and not T-shaped, so easier to install on flat or curved surfaces. Specifications Total length: 136mm Weight: 1.00g Gain: 1.5dBi Connector: IPEX / u.FL Expected range: Full range (15mi+/25km+ with TBS Tracer) Includes 2x TBS Tracer Sleeve Dipole RX Antenna

Read more less

TBS Triumph Pro (LHCP SMA) - The Ultimate Long-Range FPV Antenna The TBS Triumph Pro (LHCP SMA) is not just another 5.8GHz FPV antenna —it's a revolution in circular polarization technology . Developed by IBCrazy and manufactured by Team BlackSheep (TBS) , this antenna delivers exceptional range, true circularity, and superior noise rejection in an ultra-compact, nearly indestructible design. Whether you're racing, freestyling, or long-range cruising , the Triumph Pro ensures crystal-clear video and minimal interference , even in demanding environments. Why Choose the TBS Triumph Pro? True Circular Polarization - Patent-pending multi-phase elements provide a precise circular pattern unaffected by nearby objects. Ultra-Compact & Lightweight - Despite its tiny size , it maintains best-in-class range and signal quality . Rugged & Durable - Ultrasonic-welded, foam-infused cover and double-jacket semi-rigid cable protect against crashes and impacts. Optimized for Long-Range FPV - Engineered for minimal signal loss and maximum penetration in difficult environments. Multiple Connector Options - Available in SMA, MMCX, MMCX 90º, and u.FL to fit different FPV setups. Specifications: Frequency: 5.8 GHz Polarization: LHCP (Left-Hand Circular Polarized) Connector: SMA Size: Ultra-compact design for easy mounting Durability: Rigid, crash-resistant construction Frequency range 5500-6000MHz Polarization LHCP Gain 1.6dbic Axial Ratio 0.99 Weight 6.6g Height 130mm Connector SMA What's in the Box? 1x TBS Triumph Pro (LHCP SMA) Antenna 🛑 Disclaimer: Connector types and packaging may vary based on supply availability.

Read more less

The next revolution in circular polarization technology, the Triumph Pro gives professional performance in a compact, durable package. Don't let the small size fool you, the Triumph Pro doesn't compromise on performance. Designed by IBCrazy and manufactured by TBS, the multi-phase elements use patent pending technology to create a precise circular pattern that is not distorted by proximity to your aircraft or other objects. The microstrip antenna design together with a rigid and ultrasonic-welded enclosure allow mounting in exposed places, where signal propagates better. The antenna comes in 4 connector flavors: u.FL, MMCX, MMCX 90º and SMA. FEATURES: Manufactured and tested to highest standards Best in class range and signal quality Incredibly small and low weight Ultrasonic welded and foam infused cover for ultimate crash-protection Double-jacket semi-rigid cable for heavy impact resistance TECHNICAL SPECIFICATIONS: Frequency range: 5500-6000MHz Polarisation: RHCP Gain: 1.6dbic Axial Ratio: 0.99 Cable: RG405/U Weight: 2-3g Height: 85mm, 3.3 in Connector: MMCX (90º angle), MMCX, U.FL, SMA PACKAGE CONTENTS: 1x TBS Triumph Pro Antenna

Read more less

The next revolution in circular polarization technology, the Triumph Pro gives professional performance in a compact, durable package. Don't let the small size fool you, the Triumph Pro doesn't compromise on performance. Designed by IBCrazy and manufactured by TBS, the multi-phase elements use patent pending technology to create a precise circular pattern that is not distorted by proximity to your aircraft or other objects. The microstrip antenna design together with a rigid and ultrasonic-welded enclosure allow mounting in exposed places, where signal propagates better. The antenna comes in 4 connector flavors: u.FL, MMCX, MMCX 90º and SMA. FEATURES: Manufactured and tested to highest standards Best in class range and signal quality Incredibly small and low weight Ultrasonic welded and foam infused cover for ultimate crash-protection Double-jacket semi-rigid cable for heavy impact resistance TECHNICAL SPECIFICATIONS: Frequency range: 5500-6000MHz Polarisation: RHCP Gain: 1.6dbic Axial Ratio: 0.99 Cable: RG405/U Weight: 2-3g Height: 85mm, 3.3 in Connector: MMCX (90º angle), MMCX, U.FL, SMA PACKAGE CONTENTS: 1x TBS Triumph Pro Antenna

Read more less

TBS Unify Pro 5G8 HV (SMA) - Crystal Clear FPV, Seriously Tired of your FPV feed looking like a badly tuned TV from the stone age? Enter the TBS Unify Pro 5G8 HV (SMA) , the "bigger brother" in the legendary Unify Pro video transmitter lineup, now ready to take your FPV experience from "meh" to "magnificent!" This isn't just any 5.8GHz VTX; it's your ticket to cleaner video, more robust signals, and fewer "What was that?!" moments. Designed for serious FPV pilots, whether you're tearing up the race track or exploring the great unknown, this VTX brings the power and the smarts. Find the best FPV Video Transmitter for your drone right here! Directly connect it to up to 6S battery power and let its pristine 5V output keep your FPV camera happy and your video feed sparkling, thanks to its superb power filtering. No TBS CORE or PowerCube required for clean video here, though they play nice too! We've even packed in an active output power monitor, so you're always race-legal and image-perfect. This is the 6S VTX you've been searching for. Why Your Quad Needs This VTX (Like, Yesterday) 🚀 PitMode: Race Day Savior Ever been *that* pilot who powers up in the pits and accidentally nukes everyone else's video feed? Yeah, let's not do that. With TBS PitMode , you can power up your quad for repairs or tweaks with output power so low (we're talking way less than single-digit mW's) you won't bother a fly, let alone another pilot. Test your setup, see your image, and keep the peace - genius! A must-have for any Racing VTX . 🧠 SmartAudio: Control Freak Approved Remember fumbling with tiny dipswitches and hoping you got the channel right? Those days are over! TBS SmartAudio technology puts you in full command. Adjust output power, bands, channels, and frequency remotely from your smart device (TBS Crossfire, Bluetooth/Wi-Fi module needed), your radio (TBS Crossfire with Tango or compatible OpenTX), or directly from your OSD. It's like having a SmartAudio VTX with its own remote control - simple, intuitive, and no more accidental channel-stomping. ✨ CleanSwitch: Power On Without the Drama TBS CleanSwitch is your new best friend for neighbour-friendly flying. This clever tech ensures your video transmitter is totally interference-free when powering on or changing channels. No more flickering screens or angry glares from fellow pilots. Power up, switch channels, and fly happy, knowing you're not causing digital mayhem. It's just good FPV etiquette, baked right in with this CleanSwitch VTX . 💪 Power Up Your Flight - Adjustable & Mighty Don't let its tiny 7g weight and compact 31x22x6mm size fool you. This VTX is a beast! With adjustable output power from a race-friendly 25mW all the way up to a concrete-penetrating 800mW* (hello, Long Range VTX !), you get the flexibility you need. The 40CH coverage means you can fly almost anywhere, anytime, without VTX swapping headaches. Say NO! to dipswitches and YES! to easy, push-button or OSD control. The perfect Adjustable Power VTX . *HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure. Specifications: The Nitty-Gritty Operating Voltage: 2S - 6S (Finally, direct LiPo power for your HV VTX !) Supply Current: up to 600mA (Efficient, for more air time) Operating Temperature: Keep it cool with normal airflow Audio Carrier Frequency: 6.5 MHz Video Input Impedance: 75 Ohm Weight: Just 7g (with SMA, without antenna) - practically a feather! Dimensions: 31 x 22 x 6mm Input Connector: JST GH 7pin (standard after July 2018) Antenna Connector: SMA Female Socket (with trusty screw mounting holes for your SMA VTX ) Video Format: NTSC/PAL (Plays well with others) Output Power Settings: 13dBm (25mW) 23dBm (200mW) 27dBm (500mW) 29dBm (800mW*) What's In The Box: Open Me! TBS UNIFY PRO 5G8 HV Video transmitter Video Transmitter / Camera / Power cable Heads Up! While we try our best to keep this list as accurate as a laser beam, please note that included accessories can sometimes vary based on supply from the manufacturer. Consider it a little surprise from the FPV gods (hopefully the good kind!). Downloads & Further Reading TBS UNIFY Pro Manual (English) TBS UNIFY Pro Manual (German) TBS SmartAudio Specifications VTX Table for Betaflight

Read more less

This is a spare adapter pigtail cable for the TBS Unify PRO 5G8 and TBS Unify PRO 5G8 HV. You can choose between SMA or RP-SMA to U.FL connector that allows for snap-on installation.

Read more less

This is a spare adapter pigtail cable for the TBS Unify PRO 5G8 and TBS Unify PRO 5G8 HV. This comes with a RP-SMA connector and so simply solder on the cable and go!

Read more less

This is a spare / replacement set of M3 wheel lock nuts, sold in packs of 10 Part Number - AS91826

Read more less

Team Black Sheep Glass ND Filter - Neodymium-Treated High-Precision Lens Take your FPV footage to the next level with the BlackSheep Glass ND Filter, designed for sharpness and clarity even in the brightest environments. Each lens is crafted from high-quality, neodymium-treated glass and cut with industrial-strength lasers, ensuring a flawless, scratch-resistant finish without the "micro-scratches" commonly seen on other filters. This attention to detail guarantees a crystal-clear view and balanced exposure control, helping you capture cinematic-quality shots with reduced glare and natural motion blur. The ND filter is ideal for high-sunlight conditions, giving you precise control over light exposure and enabling smooth, professional-grade video capture. Sized at 36 x 33 x 1.9 mm, this filter is easy to install and designed to withstand the demands of FPV flying, offering durability and performance for both recreational and professional pilots. Key Features: Industrial Laser-Cut Precision : Lens cut with industrial lasers for a smooth, ultra-sharp finish free of micro-scratches. Neodymium-Treated Glass : High-grade, scratch-resistant glass that enhances color fidelity and clarity. ND32 Light Reduction : ND rating reduces light exposure for ideal shutter speed and motion blur, perfect for high-sunlight environments. Compact & Durable : Built for the rigors of FPV flights with a slim profile of 36 x 33 x 1.9 mm, ensuring easy installation and lightweight durability. Specifications: Material : Neodymium-treated glass, scratch-resistant Dimensions : 36 x 33 x 1.9 mm Compatibility : Fits most FPV cameras (check specific model compatibility) What's in the Box: 1 x BlackSheep Glass NDFilter

Read more less

Unleash your brand loyalty and add a personalized touch to your gear with the Team iFlight Logo Stickers! Perfect for the drone enthusiast looking to customize their equipment, these high-quality stickers are in brand-new condition, ready to make your drones, transmitters, cases, or even laptops stand out with the sleek iFlight branding. The pack includes a variety of sizes, ensuring you have the ideal fit for any surface you choose to adorn. Crafted from durable, weather-resistant material, these stickers are designed to withstand the elements and maintain their vibrant appearance. Whether you're at a race, a meet-up, or just out flying for fun, these Team iFlight Logo Stickers are an excellent way for you to show off your affinity for one of the leaders in drone technology. Grab a set from our bargain bin and elevate the look of your equipment without breaking the bank! ⚠️ This item is sold "as is". We will not offer any additional support for this directly. You are welcome to contact the manufacturer for further support, but this will be at their discretion and may require you to ship the goods directly to their factory. You will have 7 days to return the item as a change of mind return, assuming it is in the same condition you received it in (We will not refund shipping costs). While we try our accurately describe it as is, please note that we have not completed a complete evaluation of this product to confirm every feature, and function of this unit works. Please note that original parts/accessories may be missing, unless we explicitly mention in this description that they are included. Please understand and consider this before deciding to buy a bargain bin item.

Read more less

A little slice of London for the toy basket. We picked this one because it nails that classic British telephone box look without tipping into tacky. It’s soft, lightweight and cheerfully absurd in the best way. The kind of toy dogs immediately grab, parade around and proudly present to guests like a souvenir from their latest city break. Bringing a playful London twist to everyday fetch, this plush telephone box is compact, well-stuffed and fitted with a squeaker for added drama. A fun update for dogs who enjoy novelty toys with a bit of character. Key Features Plush telephone-box design with bright, iconic detailing Built-in squeaker for instant engagement Soft, lightweight feel for carrying and tossing Well-stuffed and comfortable for cuddles Great as a London-themed gift or souvenir Size & Materials Size: 18 cm x 8 cm x 8 cm Materials: Soft plush exterior; internal squeaker; poly-fill interior Care: Spot clean or gentle hand wash All our orders are wrapped to a gift-worthy standard, free of charge. Want to add a personal touch? Just purchase one of our greeting cards, leave us your note at checkout, and we’ll handwrite it for you. Questions? Drop us a line at hello@fauna.london

Read more less

📦 Open-Box, new item Portable design, easy to assemble: This adjustable clothes wardrobe with adjustable height button adopts a portable design, fixed by PP plastic and knobs, easy to assemble and disassemble, very suitable for people who like DIY. It can make your room tidy and clean, and it can also save your living space, which is a very good tool in life Width and height adjustable: The total height of the heavy duty telescopic clothes rack after assembly can be adjusted between 8.1-9.8 feet, and the total length can be adjusted between 7.5-10.8 feet. You can flexibly install according to the size of your room, which can be perfect fit your space High-quality iron + PP plastic: All materials of this portable garment rack are strictly selected and made by exquisite craftsmanship. The high-quality iron bracket is and contains white paint on the outside. It has good anti-rust performance. The brackets are made of PP plastic Connection, high carrying capacity, excellent stability, suitable for long-term use Large Capacity: This heavy duty telescopic wardrobe organizer contains 6 bars and 2 hangers, which can be used to hang hats, towels, scarves, etc. High capacity can meet your various needs; the top spring device will not damage your walls and ceiling, this is an ideal clothes organizer, especially suitable for large families with limited space Space Saving: Are you still worried about the lack of space in the closet? This retractable hanger can hang all clothes instead of being folded to maintain the texture and shape of the clothes. The environmentally friendly PP hook helps to hang the clothes, and the groove on it can prevent the clothes from gathering, which is especially practical

Read more less

This is a kit of 2x tempered glass protectors for your runcam 5. Super useful if you have a crash and crack/smash your glass. The kit also includes some double sided sticky stuff to mount the glass to your Runcam 5.

Read more less

The TENGRi Unmanned vehicle HUB computer (UvHc) provides Ardupilot and PX4 based UAV builders and operators a device for integrating flight controllers, sensors, payloads, navigation, video, communications, cloud and control devices into a single unified platform using popular components. The UvHc is powered by an NXP iMX6 Quad processor with a highly stable and reliable linux operating system on which the TENGRI Fusion firmware runs. No Android updates or crashes, just industrial grade reliability. Integrate and deploy best-in-class air, ground, and cloud components with the TENGRi Fusion firmware that supports popular hardware manufacturers and standards. Available in two versions UvHC - Standard hub computer UvHC Plus, all features of standard version with an additional 4x analog video inputs. What is it used for? Build a custom Mavlink based ground station in less than an hour of any form factor using your preferred controls / displays Connect multiple camera's and / or payloads on the UAV for integrated Video, telemetry, and control Broadcast HD video between two Tengri units using off the shelf USB wifi adapters (range dependent on antenna's - up to 10km) Deploy multiple ground receivers to support collaborative mission teams Relay video between UAV's and ground control receivers with a video relay UAV or ground based relay station. Enable single operator missions with multiple joysticks / controls for payloads on ground controller Coordinating artificial intelligence / machine learning tasks via an onboard computer (Coral / Jetson) or in the cloud via LTE connection Payload Integration onboard (over 20 payload integrations planned and counting) For more information please refer to the applications brochure - Tengri.Applications Payload Integrations with Tengri Fusion Advanced Video Broadcasting Key Features Works with all Ardupilot and PX4 based flight controllers. Quick plug & play installation. Configured via RC transmitter controls or USB keyboard - no laptop or mobile device required. Integrates with most popular devices such as Futaba / Frsky RC transmitters, RFD telemetry radios, HDMI cameras, FPV analog cameras, Connex HD video transmission, off-the-shelf USB wifi adapters/antennas for DIY HD broadcasting, game controllers / joysticks, and much more. New integrations are being added continuously. Hardware connectivity via USB, Serial/UART, HDMI, Composite analog camera input, and Canbus. USB Hub connectivity is supported for connecting multiple devices. Software / firmware connectivity via Mavlink, UAVCAN, TCP/IP, UDP, TENGRi_Broadcast. Develop an integrated professional system highly customised to your specific requirements and UAV's. Upgradeable and expandable to support new devices, protocols, and standards. Included 1x TENGRI Unmanned vehicle Hub computer 5x Analog video connection cables (only included with plus version) 1x Serial connection for Pixhawk 1 generation flight controllers 1x Serial connection for Cube, Holybro, DROTEK flight controllers 1x Serial connection for CUAV flight controllers 1x Canbus connector

Read more less

📦 Open-Box, new item • Heavy-Duty Tension Rod with No Damage Installation: Designed for easy installation with no drilling or permanent fixings required. Uses spring tension for secure fitting without damaging walls or surfaces. Please follow the installation method shown in the video to ensure correct load-bearing performance. • Package Contents and Size: Includes 1 adjustable tension rod extending from 103 to 190 cm and 2 rod mount holders. Using the holders together with the tension rod allows for improved load support. The double-sided tape on the holders can be reused. • Durable and Stable Construction: Built for strength and stability when installed correctly. Refer to the included instructions to ensure optimal performance and long-term reliability. • Easy to Use Design: To install, compress the rod using its elasticity rather than placing it directly onto the holder. This ensures a stronger and more secure hold. • Wide Range of Applications: Suitable for cupboards, windows, kitchens, wardrobes, bathrooms and DIY projects. Ideal as a curtain rod, storage solution or space divider in both home and utility settings.

Read more less